Dear Sir,
Specify the location on your fabrication drawing and the PC board shop will
tape off the unwanted area. Mind you its less expensive just to finish the
whole board with the immersion gold.
Thomas Beales
RB Design and Fabrication
621 S. Andreasen Drive, Suite F.
Escondido, CA 92029
Tel
Does anyone out there have a copy of Protel 99SE Schematic and PCB that
they want to sell. It must be a legal copy that you are willing to give
a letter of transfering ownership.
If so please send an email to [EMAIL PROTECTED]
Thanks
Tom
Thomas Hilton, President
Thunderbird Electronics Inc
Reporting-MTA: dns;alz2.Biotest-MT.de
Received-From-MTA: dns;alz2.Biotest-MT.de
Arrival-Date: Wed, 21 Jan 2004 03:16:20 +0100
Final-Recipient: rfc822;[EMAIL PROTECTED]
Action: failed
Status: 5.1.1
Can someone please unsubscribe this recipient?
* * * * * * * * * * * * * * * * * * * * * * * * * *
Please excuse my ignorance, what are 4/4, 5/5 etc...?
> -Original Message-
> From: Igor Gmitrovic [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, 21 January 2004 12:25
> To: Protel EDA Forum
> Subject: Re: [PEDA] Autorouter
>
>
> And add 6/6 in between to smooth the transition.
>
> Are yo
-Original Message-
From: postmaster+AEA-Biotest-MT.de +AFs-mailto:postmaster+AEA-Biotest-MT.de+AF0-
Sent: Friday, 16 January 2004 14:46
To: Thomas
Subject: Benachrichtung zum +ANw-bermittlungsstatus (Fehlgeschlagen)
Dies ist eine automatisch erstellte Benachrichtigung +APw-ber den
> -Original Message-
> From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]
> Sent: Friday, 16 January 2004 13:30
> To: Protel EDA Forum
> Subject: Re: [PEDA] Gerber output problems
> The Protel programmers didn't anticipate that you'd have a
> surface pad with
> a hole, it seems. If
> -Original Message-
> From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]
> Sent: Friday, 16 January 2004 12:25
> To: Protel EDA Forum
> Subject: Re: [PEDA] Gerber output problems
>
>
> At 10:54 PM 1/14/2004, Drew Mills wrote:
> >I completed the layout of a small PCB (99SE) designed for
> -Original Message-
> From: Leo Potjewijd [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, 14 January 2004 21:07
> To: [EMAIL PROTECTED]
> Subject: [PEDA] (un)hiding part fields
there must be an easier way than manually
> following the same
> sequence over and over:
>double click part
> -Original Message-
> From: Tony Karavidas [mailto:[EMAIL PROTECTED]
> Sent: Thursday, 18 December 2003 12:20
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] What is the meaning of "DXP"
-snip-
> What's common about a hammer and a pipe wrench?
A pipe wrench can be used as an emergency h
I experienced this exact same problem two days ago (HP LaserJet 1200).
I wondered what caused the huge text the first time I tried to print a BOM.
> -Original Message-
> From: Leo Potjewijd [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, 19 November 2003 06:18
> To: [EMAIL PROTECTED]
> Subjec
> -Original Message-
> From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]
> Sent: Saturday, 25 October 2003 10:03
> To: Protel EDA Forum
> Subject: Re: [PEDA] Protel 99SE
> I'm not sure I know what the "disjointed line problem" is. I
> think I may
> see, occasionally, some drawing ar
Please see below:
> -Original Message-
> From: Dwight Harm [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, 22 October 2003 18:22
> To: Protel EDA Forum
> Subject: Re: [PEDA] Open source SP7
>
>
>
> > -Original Message-
> > From: Jon Elson [mailto:[EMAIL PROTECTED]
> > Sent: Tuesday
I have seen the disjointed line problem on every single installation of
Protel99SE I've come across (about a dozen or so) and refuse to believe that
it is hardware related - how could so many different systems all have the
same hardware problem? - unless Protel wrote the code for one specific
graph
Yes I've noticed that the [ALT] + [numeric keypad] does not generate
characters in the Protel text editor. I don't think there is anything you
can do about it.
Note however that this does work in all the text edit boxes in schematic and
pcb (though the PCB editor won't display any of the extended
I've got a photocopied sheet of shortcuts stuck to my PC, not sure where it
came from.
But it did not have the CTRL = electrical grid off shortcut for PCB. It has
CTRL (hold) for snap grid disable in schematic.
So yes please do scan the mouse pad.
Tom L.
> -Original Message-
> From: Ter
solder
two PCBs together at right angles - V strong & can be waved so V cheap (&
also totally unreworkable)
Ian Thomas
- Original Message -
From: "Peter Bennett" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Friday, October 10,
Not sure about the DXP libraries but the 99se footprints are BAD.
I recommend you make your own.
> -Original Message-
> From: Mr. Zhang Yang Tian [mailto:[EMAIL PROTECTED]
> Sent: Friday, 5 September 2003 12:55
> To: proteledaforum
> Subject: [PEDA] Where to find SMD package named 0805 in
Good day all!
I am trying to import an Orcad Layout file (.max) version 9.2.3 into my Protel 99SE
and it crashes soon after starting every time on 2 different machines. I get a partial
import but it seems to fail at the same point every time. I have a very hot project
and any help would be great
> -Original Message-
> From: Ian Wilson [mailto:[EMAIL PROTECTED]
> Sent: Thursday, 4 September 2003 13:11
> To: Protel EDA Forum
> Subject: Re: [PEDA] Joining 2 different nets keeping seperate
> identifiers?
>
-snip-
>
> I think, Jami, that you are missing a critical aspect or it
> is
Try:
http://groups.yahoo.com/group/protel-users-resale/
> -Original Message-
> From: Jeremy Thompson [mailto:[EMAIL PROTECTED]
> Sent: Thursday, 4 September 2003 09:02
> To: [EMAIL PROTECTED]
> Subject: [PEDA] WANTED: Protel 99se license
>
>
> Hello.
> I am after a Protel 99se license.
Could this be because you were editing the pad location instead of the
component location?
I have a couple of single (through hole) pad test point parts with which
that I have noticed this - double clicking the pad brings up the pad
location properties box not the component location properties box
Can any one address autoplace settings and/or required rules for a successful
autoplacement of a dense population of components on a small footprint. I am having
issues with components stacking on each other and/or placing outside boundaries. Any
help will be greatly appreciated.
Thank you,
Protel 99se can do this.
Go to Tools/Annotate and then click on the Advanced Options tab.
In this tab you can define a suffix for all sheet parts (i.e. a suffix of 10
applied to the components from 0 to 23 would give part numbers 1000 to 1023)
> -Original Message-
> From: [EMAIL PROTE
Or incontinence.
Sorry.
> -Original Message-
> From: Igor Gmitrovic [mailto:[EMAIL PROTECTED]
> Sent: Monday, 23 June 2003 09:03
> To: Protel EDA Forum
> Subject: Re: [PEDA] OrCad to Protel
>
>
> Another corollary is "The grass is brown wherever you go". It
> might not be the colour of
white.
> -Original Message-
> From: Thomas
> Sent: Friday, 20 June 2003 11:18
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] PEDA[OT] - PCB Duplication Methods
>
>
> Scan both sides of the unpopulated pcb and save them as a bit maps.
>
> Then use a bitmap impo
Scan both sides of the unpopulated pcb and save them as a bit maps.
Then use a bitmap import tool (e.g.
http://groups.yahoo.com/group/protel-users/files/BMPtoPCB.zip , you may have
to join this group to get access to this file) to import the bitmaps to
*MECHANICAL LAYERS*.
Then simply trace over
On the SERVER menu (arrow symbol left of FILE menu), design utilities,
compact.
> -Original Message-
> From: Mark Iams-McGuire [mailto:[EMAIL PROTECTED]
> Sent: Monday, 17 March 2003 08:51
> To: [EMAIL PROTECTED]
> Subject: [PEDA] file compression
>
>
> Hi,
>
> It's been a while since I
F5 refreshes the explorer pane. However, the SCH's are sorted in the order
they are drawn on the project sheet.
To move them use the "send item to back/front(of)" command on the sheet
symbols then press F5 to refresh.
I think this was how I did it last time.
> -Original Message-
> From: De
We also have had excellent service from Entech.
> -Original Message-
> From: DUTTON Phil [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 7 February 2003 13:46
> To: Protel EDA Forum
> Subject: Re: [PEDA] Aus PCBs
>
>
> Hello Ian,
>
> You may also like to try;
>
> Entech Printed Circuits
> [
> -Original Message-
> From: Brad Velander [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 24 January 2003 09:57
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] General component data tracking and library
> management questions
-snip-
>
> Why is it that we are finding these items now! F
Ray, in: (right click or Tools menu) Preferences/Graphical Editing uncheck
"Add Template to Clipboard".
Select the section of the schematic you want to copy, Edit/Copy (Cntrl-C)
add a reference point.
Paste (Cntrl-V) into word.
You may need to add a selected bounding box around the selection to
ly awesome, and totally
> beyond what you can
> even begin to imagine based only on these photographs.
>
> JaMi
>
> - Original Message -
> From: "Thomas" <[EMAIL PROTECTED]>
> To: "'Protel EDA Forum'" <[EMAIL PROTECTED]>
> Sent: Thursda
What's nuts about that?
I had an 800W tesla coil that generated about 18" continuous sparks
(500kV?).
It was a great party trick, until someone decided to throw a beer can into
it, shorting the primary to the secondary coil.
The caps have all been appropriated for other HV projects, but I've re
m
> Subject: Re: [PEDA] Connectivity Nightmares
>
>
> why?
> what is the relevance of this?
> i've never really understood that
>
> Dennis Saputelli
>
>
> Thomas wrote:
> >
> > Do you have "Descend into sheet parts" ticked when runn
Do you have "Descend into sheet parts" ticked when running the synchroniser?
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 28 November 2002 14:21
> To: Protel EDA Forum
> Subject: Re: [PEDA] Connectivity Nightmares
>
>
> >
> > At 12:36 PM 28
Forgive me if you already know this:
If any buss connects to a port make sure the busses have net labels.
For example an 8 way buss with lines D0 to D7 connected to a port needs a
net label "[D0..D7]" without the quotes placed on it for connectivity also
the port must have the same name (that is
Have you tried repairing the database that contains the library?
Server menu (arrow left of File)/Design Utilities/Repair
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 28 November 2002 12:40
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Simple (?)
Is it only one particular part or does it happen if you select any type of
component?
What about a part from a different library?
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 28 November 2002 12:35
> To: Protel EDA Forum (E-mail)
> Subject: [PEDA]
Is it this dialogue box (key sequence:- T I P) ?
Tools/Interactive Placement/Position Component text.
> -Original Message-
> From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 22 November 2002 12:22
> To: Protel EDA Forum
> Subject: Re: [PEDA] position dialog
>
>
> i was
Just hit "Cancel" when the wizard starts and you can construct a component
footprint manually.
> -Original Message-
> From: Anand Kulkarni [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 20 November 2002 14:28
> To: PROTEL USER Group
> Subject: [PEDA] question about new footprint in PROTEL
>
te them with imagemagick (for resolution,
> making a thumbnail index, whatever).
>
> Cheers,
> Matthew van de Werken
> Electronics Engineer
> CSIRO Exploration & Mining - Gravity Group
> 1 Technology Court - Pullenvale - Qld - 4069
> ph: (07) 3327 4685 fax: (0
You do realise that you can copy/paste directly from schematic to word,
don't you? There is even an option in Preferences to include the template.
Select all items on the schematic, then edit/copy, left click a reference
point, then edit/paste in Word.
> -Original Message-
> From: [EMAIL
$1200 AUS for the two day "Protel 99SE Simulation Training course"!
Plus airfares, plus accommodation, do these people think I'm made of money?
It's a pity, as it did sound worthwhile until I got to the bottom line.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: m
Or you could use the bitmap to Protel PCB converter written by Paul D
Fincato (B&W bmp's only).
Available (free) at:
http://groups.yahoo.com/group/protel-users/files/
> -Original Message-
> From: Igor Gmitrovic [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 16 October 2002 11:02
> To: P
Have a look at the files area of the Protel users forum on Yahoo:
http://groups.yahoo.com/group/protel-users/files/
There's plenty of basic scripts there (you will need to be a member to
access this area however).
or see what you can make of this:
ResetParameters
AddSingleParameter "
Allot of work? That's probably the biggest understatement I've hear this
year!
But don't let me discourage you.
If you can succeed in doing this - a whole team of programmers at Protel
still have not - you will make many friends and allot of money.
> -Original Message-
> From: Bevan
Try here:
http://www.vermason.co.uk/logo_symbols/esd_symbol_l.jpg
> -Original Message-
> From: Robert M. Wolfe [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 10 October 2002 11:11
> To: Protel EDA Forum
> Subject: [PEDA] Static Sensitive Symbols or Handle With static
> Protection
>
>
>
k.
Tom.
> -Original Message-
> From: Ian Wilson [mailto:i.wilson@;considered.com.au]
> Sent: Wednesday, 9 October 2002 10:56
> To: Protel EDA Forum
> Subject: Re: [PEDA] OT - Complex boards and time to Layout?
>
>
> On 10:19 AM 9/10/2002 +1100, Thomas said:
>
Sometimes that's just not possible though.
I've recently finished a double sided PCB with allot of controlled impedance
tracks on one side widely spaced to prevent xtalk and to prevent arcing (its
a surge protection device) with a solid ground plane on the other side.
My board house has not compl
It has it's problems, usually associated with updating footprints, deleting
the old footprint from the pcb first is the best workaround.
This is usually caused by replacing a device with a new schematic part and
associated footprint that differs in the number of connections (pins/pads)
than the
You are a certified loony person (anyone who works in this business is ;-)
But as you noted the colour does not change, it's a recognised bug.
Tom.
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 3 October 2002 11:03
> To: Protel EDA Forum (E-mail)
>
On the "Update Design" form make sure of the following settings:
Connectivity should be = Nets and ports global.
Append sheet numbers to local nets = unchecked.
Assign Net to Connected Copper = checked
Descend into Sheet Parts = Checked <--- I suspect this may be the
offending setting
Just
? Have I given "input_domain" and
"fraction" wrong values?
Thomas
- Original Message -
From: "Rolf Molitor" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Monday, September 30, 2002 3:13 AM
Subject: Re: [PEDA] Si
understand what you mean with 'part type as a parameter',
could you explain?
Thomas
handled The output from this
- Original Message -
From: "Rolf Molitor" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Friday, September 27, 2
BLE.
Thomas
- Original Message -
From: "Rolf Molitor" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Thursday, September 26, 2002 2:56 AM
Subject: Re: [PEDA] Simulation Function Block, PWLR
Thomas,
is it DXP or 99SE you are working
Use the "select connected copper" process to select the whole track.
Then do a global edit, with selection = "same" to change all selected tracks
to the net required.
> -Original Message-
> From: Anand Kulkarni [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 27 September 2002 11:26
> To: PROTE
Ie for an inductor, its inductance
> value etc. I might however be wrong on this (it wouldn't be a first).
>
> - Original Message -
> From: "Thomas Josefsson" <[EMAIL PROTECTED]>
> To: "Protel EDA Forum" <[EMAIL PROTECTED]>
> Sent: Thurs
ibute must be a value."
What value am I supposed to use?
Grateful for a detailed explanation (or a reference to where I can find a
detailed explanation) since I am new to this software package.
Thanks
Thomas
The Netlist contains the following statement;
AU1 %VD(AT,0) %VD(NETLABEL26,0) AU1P
'em that they should ignore plated/non-plated markers
> in your source files.
>
> Cheers
>
>.
>ô ô )
> -oOOo--(_)---oOOo--
>
> Ralf Guetlein
> Biotest Medizintechnik GmbH
> Industriestrasse 19
> D-63755 Alzenau
>
> -Original Message-
> From: Rick Wilson (Protta) [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 20 September 2002 15:06
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Unplated pads
>
>
> Thomas,
>
> Make your bottom layer pads have "NO
oring all warnings (or turning
> them off if
> that's possible).
>
> John Haddy
>
>
> > -Original Message-
> > From: Thomas [mailto:[EMAIL PROTECTED]]
> > Sent: Friday, 20 September 2002 10:34 AM
> > To: Protel Data Forum (E-mail)
> >
Our board house has asked us to de-check the "Plated" box for single sided
pads.
Ok, 1 global edit later and it's done, only one problem the DRC now comes up
with:
Processing Rule : Broken-Net Constraint ( (On the board ) )
Violation Net A
Warning - net contains unplated pads
V
p in the root node of the database
directory).
When I have a monolithic MS Access Database, the
file doesn't
come up at all.
changing the "Name" field to
Namemygal ;
fixes the problem.
wkr,
Thomas.
> 3-8-02
> After successfully compiling and sim
t-Type: text/plain
> -Original Message-
> From: Thomas
> Sent: Monday, 9 September 2002 11:49
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Cease the spam
>
>
> I'm not getting it here.
>
> Tom.
>
> > -Original Message-
>
I'm not getting it here.
Tom.
> -Original Message-
> From: JaMi Smith [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 9 September 2002 11:39
> To: Protel EDA Forum
> Cc: JaMi Smith
> Subject: Re: [PEDA] Cease the spam
>
>
> Igor and the group,
>
> I have been getting the same "Cease the Sp
First response, or first helpful response?
Because I think this may be a bug, I can reproduce the problem, but not
recommend a solution.
Sorry,
Tom.
> -Original Message-
> From: Gareth De Mar [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 16 August 2002 11:58
> To: '[EMAIL PROTECTED]'
> Subj
Foxmail is (free) non MS email client option. Supports LAN and remote
mailbox.
> -Original Message-
> From: Bagotronix Tech Support [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 16 August 2002 03:07
> To: Protel EDA Forum
> Subject: Re: [PEDA] OT: Spoofed email address (was: (Un)subscribe!!!)
One more file you probably should back up (it's in the windows directory
again):
Client99SE.INI
This stores allot of info including, the colour pallet colours you have
chosen.
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 29 July 2002 4:11 PM
> To
Also, don't forget to back up any custom button bit maps you have made.
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 29 July 2002 4:11 PM
> To: Protel EDA Forum (E-mail)
> Subject: [PEDA] Location of custom settings
>
>
> Hi All,
> Does anyb
In the windows directory (something like C:\WINNT or C:\Windows):
CLIENT99SE.rcs
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 29 July 2002 4:11 PM
> To: Protel EDA Forum (E-mail)
> Subject: [PEDA] Location of custom settings
>
>
> Hi All,
>
> regards,
>
> Phil Dutton C.I.D.
>
> -Original Message-
> From: Thomas [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 26 July 2002 12:43
> To: Protel Data Forum (E-mail)
> Subject: [PEDA] TQFP footprint
>
>
> Does anyone know a good source (preferably on l
With a PCB document open:
Servers Menu (down arrow menu item next to
File)/Customize/ShortCutKeys/PCBHotKeys
Menu Button -> Edit
look for PCB:Zoom , double click to edit.
> -Original Message-
> From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 24 July 2002 6:05 PM
>
No you're not alone. It works for me too.
It's just that you're the only one cluey enough to notice.
Thanks again.
> -Original Message-
> From: Brian Guralnick [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 23 July 2002 5:13 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Auto-Pan patch S
Jeepers Brian why didn't you say so earlier?
I tried your patch but found it a bit clunky and I think it had a refresh
problem as well.
Now you tell me all I have to do is undock the placement tools
toolbar - and voila! No more panning problems. Doh!
Thanks for the tip.
Tom.
> -Original
The first thing to try would be the Repair database tool. Servers Menu (the
down arrow next to "File")/
Design Utilities / Repair.
> -Original Message-
> From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 23 July 2002 12:49 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Da
t the way the real
> > release had had it, it was made by me after I
> > cut and pasted it from the pdf file. The formatting
> > was screwed up and so was my editing.
> >
> > After all, english is not my first language, I speak
> > in electronic schematics normall
I'm pretty sure Hugh was being ironic, as this was the same type of mistake
made in the Altium press release.
> -Original Message-
> From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 22 July 2002 4:03 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Well, here it comes.
>
> -Original Message-
> From: Brad Velander [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 10 July 2002 3:07 AM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] restore defaults in layer order display - don't do
> it!
>
>
-Snip-
> There is
> only one way that Protel will ever listen, stop g
The best way I can see around that problem would be to add the ddb file and
image file to a compressed archive with the "include subdirectory
information" box checked (WinZip can do this).
This will probably only work if both the files are on a local drive.
> -Original Message-
> From: DU
Try putting the bmp in the directory C:\Program Files\Design Explorer 99
SE\System
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 3 July 2002 12:06 PM
> To: Protel EDA Forum
> Subject: [PEDA] Images and Schematic Templates
>
>
> I have adde
Blocking incoming and outgoing UDP messages on port 138 dose not work.
Unless I've stuffed up the security policy filter.
> -Original Message-
> From: Andrew Jenkins [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 28 June 2002 11:45 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] License Issu
The deal is that companies will charge what the market can afford.
If different regions have different economies then regional pricing is
usually applied.
BTW, it's still too expensive for us, I've been told that we are not going
to buy any *new* licences or DXP.
Tom.
> -Original Message-
> -Original Message-
> From: Terry Creer [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 26 June 2002 3:05 PM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Bug fixes anyone?
>
>
> >*snip*
> >"There are no guarantees that Protel DXP will be any
> >better or worse than Protel 99SE."
> >*
Finally managed to get ftp working through our firewall.
The two windows do weird things to floating toolbars if the
toolbar is dragged under them.
You're right: Ugly! I think I'll stick with re-centre.
Cheers for trying anyway,
Tom.
> -Original Message-
> From: Brian Guralnick [mail
I'd like to try it Brian, but I have no ftp access.
Any chance of posting it to the Protel users file area on yahoo?
Tom.
> -Original Message-
> From: Brian Guralnick [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, 22 June 2002 6:30 AM
> To: Protel EDA Forum
> Subject: [PEDA] Autopan patch
I have a copy of our company logo in the C:\Program Files\Design Explorer 99
SE\System\Buttons directory on all PC's with Protel installed, cludgy but it
works, if all Templates have C:\Program Files\Design Explorer 99
SE\System\Buttons as the location of the bmp file.
Tom.
-Original Message
Also, UltraCLC.exe (freeware):
http://www.ultracad.com/calc.htm
Good articles on impedance control there too.
Tom.
-Original Message-
From: Rene Tschaggelar [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 13 June 2002 7:53 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Impedance Control. What
Tricky, I don't suppose it means:
Quality
Design
Compels
Increased
Salary
Payments? ;-)
Tom.
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 11 June 2002 12:42 PM
To: Protel EDA Forum
Subject: Re: [PEDA] unused QFP pins
On 07:18 PM 10/06/2002 -0700, Drew
I always use a macro that closes all open documents then closes the project,
before shutting down Protel.
Assigned to a toolbutton or shortcut key it's a handy way to avoid this sort
of thing, also it makes starting Protel quicker (also I don't have to
remember to hold CNTRL when starting).
It's
-Original Message-
From: John Haddy [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 6 June 2002 2:48 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Protel / MSoft
-SNIP-
Ever (optimistically) hopeful for an 99SE SP7 release that addresses
the known bugs without adding new ones,
optimistic - H
You could put a dashed *line* set to the same colour as the template
background over the *wire*.
It shows up ok-ish.
I've used this method before to show green/yellow earth wire in a wiring
loom diagram. Using 'medium' sized green wires with 'small' yellow lines as
the stripe.
Tom.
-Origina
It's been a while since I've installed Protel, but from memory: Schematic
editor Preferences/Graphical Editing/Convert Special Strings is not checked
by default. So you will see things like '.DATE'instaed of the current date.
'Add template to clipboard' (in Schematic editor Preferences/Graphical
Aah ha! That fixed it. Sort of.
I've only just worked out how to maximise programs across two monitors (as
well as enabling "Maximise across both desktops" I also have to hold down
CNTRL whilst maximising a window. I used to "restore" a program window and
stretch it to fill both monitors.
Now th
Yes this sounds like the problem I have with the autopan setting when using
the "Adaptive" mode. Fiddling with the speed setting did not help.
That's why I now use re-centre.
Tom.
-Original Message-
From: Terry Creer [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 22 May 2002 4:21 PM
To: Pro
Any object (Pad, via track etc...) added to this layer will appear on all
*signal* layers.
The help file actually has some useful info on this (for a change).
Tom.
-Original Message-
From: Waheed Bajwa [mailto:[EMAIL PROTECTED]]
Sent: Friday, 17 May 2002 4:36 PM
To: Protel EDA Forum
Sub
Have a look at "PCB design layers" in the help file.
Tom
-Original Message-
From: Waheed Bajwa [mailto:[EMAIL PROTECTED]]
Sent: Friday, 17 May 2002 5:17 PM
To: Protel EDA Forum
Subject: [PEDA] Some more info
Ok here are some more information requiring issues...
What is:
Top/Bottom Pa
I received an invite to apply for Protel DXP beta testing today.
As I have not signed it yet, I don't suppose its breaking the NDA to let you
know this.
Tom.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
*
> -Original Message-
> From: Abd ulRahman Lomax [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 19 April 2002 2:32 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] dual monitors
>
> If the Protel window is maximized, it spreads across both monitors;
> individual windows can then be sized so
> -Original Message-
> From: Abd ulRahman Lomax [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 19 April 2002 6:08 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] dual monitors
>
>
> At 12:16 PM 4/18/2002 -0700, Dennis Saputelli wrote:
> >we have 2 ea 21's and matrox G550 card
> >can't get
1 - 100 of 208 matches
Mail list logo
