Hello Miker,
schematics button, went back to my schematic, and
one component's part did not update. however, several
other identical components did update.
why won't the one part of the one component update?
In the knowledge base item 1934 is a description of the internal cache in
.
thanks again! miker
-Original Message-
From: Nick Piccinich [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 14, 2002 3:52 PM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] update schematic ??
Hi Mike,
design-make project library
Save the library with the changes.
open the schematics where you
Miker,
You have to click to a different part in the list and then back to the one
you just changed in order to get Update to work.
Don't know why...
Frank
At 06:42 AM 5/15/2002 -0500, you wrote:
thanks to nick and everybody else. i did indeed change
operating systems. i went from NT4 to
To: Protel EDA Forum
Subject: Re: [PEDA] update schematic ??
Miker,
You have to click to a different part in the list and then
back to the one
you just changed in order to get Update to work.
Don't know why...
Frank
at CommunicAsia 2002 in Singapore June 18-21.
-Original Message-
From: Frank Gilley [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 15, 2002 7:14 AM
To: Protel EDA Forum
Subject: Re: [PEDA] update schematic ??
Miker,
You have to click to a different part in the list
EDA Forum'
Subject: [PEDA] update schematic ??
hello,
i am still having trouble updating schematics when
i change a component in the library. i looked thru
the archives but nothing really clicked so i would
like to ask about it here.
i added a couple pins to a multipart component
Only open sheets in the schematic will be updated by Update Schematics;
same with Design | Update parts in cache. So be sure all sheets are open
first (easy way: File | Open Full Project).
-Original Message-
From: Robison Michael R CNIN
Sent: Tuesday, May 14, 2002 12:04 PM
hello,
hello.. im running the trial verion of 99SE w/sp6 as im building a
project for school... Ive run into an odd problem though ..
After my partner drew up our schematic, I took a look and realized a
majority of the parts had the wrong default designator.. (Few hundred
parts over a couple
Also, note that the Copy Attributes field can do partial replacement; if you
just want to replace the whole designator field, just put the new value in
WITHOUT braces. If you use the braces, what goes inside is a replacement
expression, like {AB=C} where any occurence of 'AB' in the field will
hello,
i built an IC component and i incorrectly numbered the ground pin
as 17 instead of the 7 it should have been. i used three of them
in the schematic and it was flagged when i went to update the
pcb. i changed the component library, updated the schematic,
but only one of the chips got
10 matches
Mail list logo