On Wed, Feb 16, 2022 at 10:57:18AM -0800, Rich Shepard wrote:
> On Wed, 16 Feb 2022, Sean Greenslade wrote:
>
> > - The preamp gain knob on the Scarlett is set high enough. Dynamic mics
> > can have pretty weak signals. On mine, I need to pretty much max out the
> > preamp to get signals strong
On Wed, 16 Feb 2022, Sean Greenslade wrote:
- The preamp gain knob on the Scarlett is set high enough. Dynamic mics
can have pretty weak signals. On mine, I need to pretty much max out the
preamp to get signals strong enough to light up the green ring.
Sean,
I turned the Scarlett Solo mic
On Wed, 16 Feb 2022, Sean Greenslade wrote:
On the Scarlett USB interfaces, the green/red LED ring around the input
gain knob is driven directly by the hardware. Pulseaudio has no
influence over this. So if you're not seeing any signal there, the
issue is in hardware. Make sure:
- The XLR
On Tue, Feb 08, 2022 at 01:21:24PM -0800, Rich Shepard wrote:
> Something(s) changed here and I don't know enough about linux audio to fix
> the problems.
>
> Environment: Slackware64-14.2. Audio-Technica AT2005USB, Scarlett Solo Gen
> 3. The latter two are connected by an XLR cable.
>
> All
Something(s) changed here and I don't know enough about linux audio to fix
the problems.
Environment: Slackware64-14.2. Audio-Technica AT2005USB, Scarlett Solo Gen
3. The latter two are connected by an XLR cable.
All worked fine until a few days ago. Now pavucontrol Configuration tab sees
the