If you need a wireless PCI device, I can provide code for
TNETW1130 (ACX111). Get it from
http://svn.berlios.de/svnroot/repos/ar7-firmware/qemu/trunk/hw/tnetw1130.c
It works partially with an emulated Linux 2.6.20:
the PCI card is recognized, and it loads firmware.
Stefan
hi!
did you ever
I'd like to detect when the kernel stack changes and it seems to me that
might be possible by looking at when the tss structure is accessed and
the esp element is changed. Linux uses a command something like the
following to update the esp in the tss during a task switch...
init_tss[smp_processor_
yes, when I rebuild my kernel with scsi support ,the hard disk sda could be
found, thank you very much .
From: Sunil Amitkumar Janki <[EMAIL PROTECTED]>
Reply-To: qemu-devel@nongnu.org
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] why "-hda myimgfile" can not work ??
Date: Fri, 04 May 20
If you need a wireless PCI device, I can provide code for
TNETW1130 (ACX111). Get it from
http://svn.berlios.de/svnroot/repos/ar7-firmware/qemu/trunk/hw/tnetw1130.c
It works partially with an emulated Linux 2.6.20:
the PCI card is recognized, and it loads firmware.
wow!! it'll take a good l
In article <[EMAIL PROTECTED]> you write:
>Hello,
>
>I've just moved from an x86 machine to a Core 2 Duo machine, a Thinkpad
>X60 tablet, running FreeBSD 6.2-STABLE. I've enabled NET_WITH_GIANT
>and made sure that the kqemu module matches my kernel, which has SMP
>enabled. When trying to start qemu
Paul Brook wrote:
I want to create a "fake"/virtual pci device that only exists in the vm.
so basically it boils down to adding a new (wireless) device that is not
connected to anything and that i can write data to/read data from the
device driver runnnig inside of qemu.
Qemu already has m
Paul Brook schrieb:
>> We can either re-arrange the entries in CPUMIPSState
>> (move those which must not be zero'ed to the end), or
>> cpu_reset must call cpu_mips_register.
>>
>> Which solution is better?
>
> ARM uses the latter solution.
> IMHO it's better to do that than try and extend the hack
On 5/4/07, Stefan Weil <[EMAIL PROTECTED]> wrote:
Resetting a MIPS cpu currently does not work, because important
entries in env (CPUMIPSState) are filled with 0 at the
beginning of function cpu_reset.
At system start, these values are set in cpu_mips_register.
After reset, env->nb_tlb == 0 res
> We can either re-arrange the entries in CPUMIPSState
> (move those which must not be zero'ed to the end), or
> cpu_reset must call cpu_mips_register.
>
> Which solution is better?
ARM uses the latter solution.
IMHO it's better to do that than try and extend the hacks were some fields are
left u
Resetting a MIPS cpu currently does not work, because important
entries in env (CPUMIPSState) are filled with 0 at the
beginning of function cpu_reset.
At system start, these values are set in cpu_mips_register.
After reset, env->nb_tlb == 0 results in a division by zero
crash of QEMU.
We can ei
hi all,
The gdbstub (option -s) of QEMU is not useable for target amd64 full
system emulation(TARGET_X86_64) on QEMU version 0.9.0. I have an
ugly/dirty fix here. Any guys review(and improve) and merge it in
the CVS tree ?
---><---
If you need a wireless PCI device, I can provide code for
TNETW1130 (ACX111). Get it from
http://svn.berlios.de/svnroot/repos/ar7-firmware/qemu/trunk/hw/tnetw1130.c
It works partially with an emulated Linux 2.6.20:
the PCI card is recognized, and it loads firmware.
Stefan
Clemens Kolbitsch schri
> I want to create a "fake"/virtual pci device that only exists in the vm.
> so basically it boils down to adding a new (wireless) device that is not
> connected to anything and that i can write data to/read data from the
> device driver runnnig inside of qemu.
Qemu already has many emulated PCI d
Hi everyone!
I've read some posts in the qemu-mailinglist archives about the idea of
a pci-proxy (allowing the client-os to access the host-os-pci devices)
and the problems related to that.
now, I want to make something similar and wonder if there is already
some source code that does all tha
tang peilei wrote:
> My phy system is my PC, a computer with ubuntu.
> and qemu-system-arm is running in this PC .
>
> I also use command like you, but I can not find any hard disk info in
> qemu's system.(in dmesg's output).
> Are you create your disk img with command qemu-img ???
I create my im
Hi Friends!!
thanks i was able to install qemu and have installed scientific linux on my
disk image!!
can u tell me how can i install a .tar.gz file present on my host linux into
my guest linux on qemu??
warm regards
gaurav jha
On 5/4/07, Christian MICHON <[EMAIL PROTECTED]> wrote:
On 5/4/07
Paul Brook wrote:
> On Monday 30 April 2007, Alexander Voropay wrote:
> > Hi!
> >
> > This patch add a simply YAMON services ( print() and print_count() )
> > to Malta pseudo-loader. This services are requred for NetBSD to run.
> >
> > As a result, an *unmodified* NetBSD 3.0 kernel starts to wor
CVSROOT:/sources/qemu
Module name:qemu
Changes by: Thiemo Seufer 07/05/04 14:34:34
Modified files:
hw : mips_malta.c
Log message:
Support for simple YAMON output, by Alec Voropay.
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/qemu/hw/mips_malt
From: Sunil Amitkumar Janki <[EMAIL PROTECTED]>
Reply-To: qemu-devel@nongnu.org
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] why "-hda myimgfile" can not work ??
Date: Fri, 04 May 2007 16:01:40 +0200
tang peilei wrote:
>> The ARM boards do not support IDE. Some of them have a SCSI cont
On 5/4/07, gaurav gunjan jha <[EMAIL PROTECTED]> wrote:
Hello Friends !!
I am trying to install Qemu from source on suse 10
suse 10 implies gcc >= 4.0.x, so you cannot compile a
working qemu. another alternative than installing gcc3
from sources is to install Suse 9 packages...
configure --
tang peilei wrote:
>> The ARM boards do not support IDE. Some of them have a SCSI controller
>> instead, as described in the documentation.
> As the ARM boards do not support IDE, and my net can not work. How can
> I copy files from QEMU system to my phy system ???
I don't really understand what yo
On May 4, 2007, at 3:34 PM, Wessel, Jason wrote:
Tristan,
I do not believe that is actually the problem, and arguably QEMU is
correct with timing accuracy set aside. The root of the issue is a
more
of a timing problem because the clear/set can happen atomically in
QEMU
with respect to the
Tristan,
I do not believe that is actually the problem, and arguably QEMU is
correct with timing accuracy set aside. The root of the issue is a more
of a timing problem because the clear/set can happen atomically in QEMU
with respect to the cpu clock vs the real hardware which takes multiple
cloc
thank you very much.
From: Paul Brook <[EMAIL PROTECTED]>
Reply-To: qemu-devel@nongnu.org
To: qemu-devel@nongnu.org
CC: tang peilei <[EMAIL PROTECTED]>
Subject: Re: [Qemu-devel] why "-hda myimgfile" can not work ??
Date: Fri, 4 May 2007 14:13:57 +0100
> the target arch is arm. and I was just u
Hello Friends !!
I am trying to install Qemu from source on suse 10
i downloaded gcc3.3.6 and after i typed make bootstrap i got the following
error
rm -f runtime-info.h tmp-runtime.s *.o *.lo libobjc* xforward \
fflags *.aux *.cp *.dvi *.fn *.info *.ky *.log *.pg \
*.toc *.tp *.
> the target arch is arm. and I was just use the download qemu arm-test
> kernel and initrd file to run. It has a config.gz in /proc, but I can not
> copy it out, becase the net can not work in my qemu, and the hda can not
> use .Is there any other way to copy data from qemu system to my phy system
Hi,
According to the documentation, reading IIR does not reset any
pending interrupt.
This issue caused VxWorks to freeze.
Tristan.
*** hw/serial.c 31 Mar 2007 16:54:14 - 1.15
--- hw/serial.c 4 May 2007 12:49:34 -
***
*** 233,242
break;
case 2:
On 5/4/07, tang peilei <[EMAIL PROTECTED]> wrote:
the target arch is arm. and I was just use the download qemu arm-test
kernel and initrd file to run. It has a config.gz in /proc, but I can not
copy it out, becase the net can not work in my qemu, and the hda can not
use .Is there any other way to
thank you for your help.
From: "Christian MICHON" <[EMAIL PROTECTED]>
Reply-To: qemu-devel@nongnu.org
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] why "-hda myimgfile" can not work ??
Date: Fri, 4 May 2007 08:30:54 +0200
On 5/4/07, tang peilei <[EMAIL PROTECTED]> wrote:
I first create a
29 matches
Mail list logo
