From: Gonglei arei.gong...@huawei.com
If errors happen for middle items of channel_list,
qmp_query_spice_channels() returns NULL, and the variable
cur_item going out of scope leaks the storage it points to.
The flag is a compatibility thing for older spice-server
versions. Meanwhile our minimum
Bryan D. Payne bdpa...@acm.org writes:
Can you explain again why the existing commands to read guest memory
(from the top of my head: dump-guest-memory, memsave, pmemsave) are
insufficient? How does your solution improve on them? What exactly can
it do what these commands can't? What
On 2014-12-04 at 20:10, Eric Blake wrote:
On 12/04/2014 02:51 AM, Max Reitz wrote:
Side note:
Now that we can produce MUCH smaller images where the reftable can
easily require enough contiguous clusters to require the creation of at
least one refblock that cannot be self-referential, it would
On 2014-12-05 at 08:08, Fam Zheng wrote:
On Thu, 12/04 15:49, Max Reitz wrote:
Test 039 used qemu-io -c abort for simulating a qemu crash; however,
abort() generally results in a core dump and ulimit -c 0 is no reliable
way of preventing that. Use abort -S 9 instead to have it crash
without a
On 2014-12-05 at 07:12, Fam Zheng wrote:
On Thu, 12/04 14:43, Max Reitz wrote:
+if (!bs) {
+error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+return;
+}
+
+target_bs = bdrv_find(target);
+if (!target_bs) {
+error_set(errp, QERR_DEVICE_NOT_FOUND, target);
+
Am 04.12.2014 um 20:44 hat Eric Blake geschrieben:
On 12/04/2014 08:56 AM, Markus Armbruster wrote:
@device is a sub-optimal name for this single parameter. Either we
accept that and move on, or we deprecate it in favor of a new parameter
with a better name. I guess the better name
Coni, Alex, Christian,
here are 2 more s390/pci features on top of the base pci support.
Thx!
Frank
Frank Blaschka (2):
s390/pci: add error event support
s390/pci: implement stpcifc instruction
hw/s390x/s390-pci-bus.c | 50 ++--
hw/s390x/s390-pci-bus.h | 36 +++-
From: Frank Blaschka frank.blasc...@de.ibm.com
This patch adds support to generate s390 pci error events
Signed-off-by: Frank Blaschka frank.blasc...@de.ibm.com
---
hw/s390x/s390-pci-bus.c | 50 +---
hw/s390x/s390-pci-bus.h | 35 +++-
From: Frank Blaschka frank.blasc...@de.ibm.com
This patch implements the last remaining s390 pci instruction
to query the function information block.
Signed-off-by: Frank Blaschka frank.blasc...@de.ibm.com
---
hw/s390x/s390-pci-bus.h | 1 +
hw/s390x/s390-pci-inst.c | 64
On 2014-12-05 at 07:37, Fam Zheng wrote:
On Thu, 12/04 14:59, Max Reitz wrote:
On 2014-12-04 at 03:29, Fam Zheng wrote:
Also add version info for other transaction types.
Signed-off-by: Fam Zheng f...@redhat.com
---
blockdev.c | 81
TCG generates optimized code for i386 repz instructions in single step mode.
It means that when ecx becomes 0, execution of the string instruction breaks
immediately without an additional iteration for ecx==0 (which will only check
ecx and set the flags). Omitting this iteration leads to different
Eric Blake ebl...@redhat.com writes:
On 12/04/2014 08:56 AM, Markus Armbruster wrote:
@device is a sub-optimal name for this single parameter. Either we
accept that and move on, or we deprecate it in favor of a new parameter
with a better name. I guess the better name isn't worth that
Am 05.12.2014 um 10:34 hat Markus Armbruster geschrieben:
Eric Blake ebl...@redhat.com writes:
On 12/04/2014 08:56 AM, Markus Armbruster wrote:
@device is a sub-optimal name for this single parameter. Either we
accept that and move on, or we deprecate it in favor of a new parameter
Max Reitz mre...@redhat.com writes:
abort() has the sometimes undesirable side-effect of generating a core
dump. If that is not needed, SIGKILL has the same effect of abruptly
crash qemu; without a core dump.
Thus, -c abort is not always useful to simulate a qemu-io crash;
therefore, this
On 12/05/2014, 10:52 AM, Jiri Slaby wrote:
hw/misc/edu.c | 351
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -593,6 +593,11 @@ F: hw/net/opencores_eth.c
Devices
---
+EDU
+M: Jiri Slaby jsl...@suse.cz
+S: Maintained
+F:
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.
Signed-off-by: Jiri Slaby jsl...@suse.cz
Cc: Paolo Bonzini
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.
Signed-off-by: Jiri Slaby jsl...@suse.cz
---
MAINTAINERS
On 2014-12-05 at 10:52, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
abort() has the sometimes undesirable side-effect of generating a core
dump. If that is not needed, SIGKILL has the same effect of abruptly
crash qemu; without a core dump.
Thus, -c abort is not always useful
Add an option to qmp_blockdev_change_medium() which allows changing the
read-only status of the block device whose medium is changed.
Some drives do not have a inherently fixed read-only status; for
instance, floppy disks can be set read-only or writable independently of
the drive. Some users may
Expose the new read-only option of 'blockdev-change-medium' for the
'change' HMP command.
Signed-off-by: Max Reitz mre...@redhat.com
---
hmp-commands.hx | 20 +---
hmp.c | 21 -
2 files changed, 37 insertions(+), 4 deletions(-)
diff --git
The 'change' QMP and HMP command allows replacing the medium in drives
which support this, e.g. floppy disk drives. For some drives, the medium
carries information about whether it can be written to or not (again,
floppy drives). Therefore, it should be possible to change the read-only
state of
Introduce a new QMP command 'blockdev-change-medium' which is intended
to replace the 'change' command for block devices. The existing function
qmp_change_blockdev() is accordingly renamed to
qmp_blockdev_change_medium().
Signed-off-by: Max Reitz mre...@redhat.com
---
blockdev.c|
Use separate code paths for the two overloaded functions of the 'change'
HMP command, and invoke the 'blockdev-change-medium' QMP command if used
on a block device (by calling qmp_blockdev_change_medium()).
Signed-off-by: Max Reitz mre...@redhat.com
---
hmp.c | 27 +++
1
Hi,
which version you tested?
do you let vm continue to run after migration?
can you provide more info?
can't reproduce it on latest version.
Thanks!
On 12/04/2014 11:14 PM, 陈梁 wrote:
Hi all
guest will hang when call system function in migration thread. The cpu usage
of vcpu thread is
Like for most other image formats, vhdx images read as all zero in qemu
after their creation (we're taking advantage from the fact that qemu has
just created the image, because PAYLOAD_BLOCK_NOT_PRESENT actually means
undefined rather than zeroed according to the spec).
This fixes that 'qemu-img
-Original Message-
From: Andreas Färber [mailto:afaer...@suse.de]
Sent: 03 December 2014 14:27
To: Stefano Stabellini; Paul Durrant
Cc: qemu-devel@nongnu.org; Peter Crosthwaite; Thomas Huth; Michael S.
Tsirkin; Markus Armbruster; Christian Borntraeger; Igor Mammedov; Paolo
Bonzini
Hi Jirka,
because this is supposed to be a poster of good QEMU practices, the
review is going to be a bit picky. Most comments are trivial to apply.
+0x20 (RO) : status register, bitwise OR
+ 0x01 -- computing factorial
+
Perhaps bit 0 can be read-only, while bit 1 is set/clear by
On 05/12/2014 06:34, Pavel Dovgaluk wrote:
From: Paolo Bonzini [mailto:pbonz...@redhat.com]
On 04/12/2014 12:02, Pavel Dovgaluk wrote:
Why do you need to do this if !cpu_can_do_io(cpu)?
We save number of executed instruction when saving interrupt or exception
event.
It leads to the call
The Xen ioreq-server API, introduced in Xen 4.5, requires that PCI device
models explicitly register with Xen for config space accesses. This patch
adds a listener interface into qdev-core which can be used by the Xen
interface code to monitor for arrival and departure of PCI devices.
This patch series is v5 of what was originally the single patch
Xen: Use the ioreq-server API when available.
v2 of the series moved the code that added the PCI bus listener
to patch #1 and the remainder of the changes to patch #2. Patch #2
was then re-worked to constrain the #ifdefing to
The ioreq-server API added to Xen 4.5 offers better security than
the existing Xen/QEMU interface because the shared pages that are
used to pass emulation request/results back and forth are removed
from the guest's memory space before any requests are serviced.
This prevents the guest from mapping
From: Paolo Bonzini [mailto:pbonz...@redhat.com]
On 05/12/2014 06:34, Pavel Dovgaluk wrote:
From: Paolo Bonzini [mailto:pbonz...@redhat.com]
On 04/12/2014 12:02, Pavel Dovgaluk wrote:
Why do you need to do this if !cpu_can_do_io(cpu)?
We save number of executed instruction when saving
On 2014-12-05 at 11:26, Kevin Wolf wrote:
Like for most other image formats, vhdx images read as all zero in qemu
after their creation (we're taking advantage from the fact that qemu has
just created the image, because PAYLOAD_BLOCK_NOT_PRESENT actually means
undefined rather than zeroed
Am 05.12.2014 um 11:26 hat Kevin Wolf geschrieben:
Like for most other image formats, vhdx images read as all zero in qemu
after their creation (we're taking advantage from the fact that qemu has
just created the image, because PAYLOAD_BLOCK_NOT_PRESENT actually means
undefined rather than
Hi; this is a ping (with some of the less frequent contributors
taken off cc), because I'd really like it if we could get this
issue dealt with (preferably before a flood of new patches to
softfloat arrive after the tree reopens for 2.3), but this patchset
needs review (for methodology, of my
On 05/12/2014 11:55, Pavel Dovgaluk wrote:
And why is can_do_io zero? :) Is the fix to move the place where
can_do_io becomes nonzero?
can_do_io is set by gen_io_start function.
As I understand, it is used to protect determinism in icount mode,
because it allows non-deterministic
On 12/05/2014, 11:35 AM, Paolo Bonzini wrote:
Hi Jirka,
because this is supposed to be a poster of good QEMU practices, the
review is going to be a bit picky. Most comments are trivial to apply.
Hi, OK :).
--- /dev/null
+++ b/hw/misc/edu.c
@@ -0,0 +1,351 @@
...
+static void
On 05/12/2014 11:50, Paul Durrant wrote:
The Xen ioreq-server API, introduced in Xen 4.5, requires that PCI device
models explicitly register with Xen for config space accesses. This patch
adds a listener interface into qdev-core which can be used by the Xen
interface code to monitor for
Am 05.12.2014 um 11:26 hat Kevin Wolf geschrieben:
Like for most other image formats, vhdx images read as all zero in qemu
after their creation (we're taking advantage from the fact that qemu has
just created the image, because PAYLOAD_BLOCK_NOT_PRESENT actually means
undefined rather than
Signed-off-by: Peter Lieven p...@kamp.de
---
block.c|2 ++
block/accounting.c |7 +++
block/qapi.c |2 ++
hmp.c |6 +-
include/block/accounting.h |3 +++
qapi/block-core.json |9 -
As it was not obvious (at least for me) where the 32 comes from;
add a constant for it.
Signed-off-by: Peter Lieven p...@kamp.de
---
hw/block/virtio-blk.c |2 +-
include/hw/virtio/virtio-blk.h |4 +++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git
this series adds the long missing multiread support to virtio-blk.
some remarks:
- i introduced rd_merged and wr_merged block accounting stats to
blockstats as a generic interface which can be set from any
driver that will introduce multirequst merging in the future.
- the knob to disable
this patch finally introduce multiread support to virtio-blk while
multiwrite support was there for a long time read support was missing.
To achieve this the patch does serveral things which might need futher
explaination:
- the whole merge and multireq logic is moved from block.c into
Signed-off-by: Peter Lieven p...@kamp.de
---
block/block-backend.c |5 +
include/sysemu/block-backend.h |1 +
2 files changed, 6 insertions(+)
diff --git a/block/block-backend.c b/block/block-backend.c
index d0692b1..545580f 100644
--- a/block/block-backend.c
+++
On 05/12/2014 12:45, Jiri Slaby wrote:
On 12/05/2014, 11:35 AM, Paolo Bonzini wrote:
Hi Jirka,
because this is supposed to be a poster of good QEMU practices, the
review is going to be a bit picky. Most comments are trivial to apply.
Hi, OK :).
--- /dev/null
+++ b/hw/misc/edu.c
@@
Kevin Wolf kw...@redhat.com writes:
Am 05.12.2014 um 10:34 hat Markus Armbruster geschrieben:
Eric Blake ebl...@redhat.com writes:
On 12/04/2014 08:56 AM, Markus Armbruster wrote:
@device is a sub-optimal name for this single parameter. Either we
accept that and move on, or we
Kevin Wolf kw...@redhat.com writes:
Am 04.12.2014 um 20:44 hat Eric Blake geschrieben:
On 12/04/2014 08:56 AM, Markus Armbruster wrote:
@device is a sub-optimal name for this single parameter. Either we
accept that and move on, or we deprecate it in favor of a new parameter
with a
Max Reitz mre...@redhat.com writes:
On 2014-12-05 at 10:52, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
abort() has the sometimes undesirable side-effect of generating a core
dump. If that is not needed, SIGKILL has the same effect of abruptly
crash qemu; without a core
On 12/05/2014 01:30 AM, arei.gong...@huawei.com wrote:
From: Gonglei arei.gong...@huawei.com
If errors happen for middle items of channel_list,
qmp_query_spice_channels() returns NULL, and the variable
cur_item going out of scope leaks the storage it points to.
The flag is a compatibility
From: Paolo Bonzini [mailto:pbonz...@redhat.com]
On 05/12/2014 11:55, Pavel Dovgaluk wrote:
And why is can_do_io zero? :) Is the fix to move the place where
can_do_io becomes nonzero?
can_do_io is set by gen_io_start function.
As I understand, it is used to protect determinism in
Since QEMU claims to support UNMAP, WRITE SAME and WRITE SAME 16
in the LBP VPD page, it is better to provide max write same length
in response for block limits VPD page because:
- T10 SBC-3 doesn't describe priority explicitly when all three
are enabled
- host driver may
Am 05.12.2014 um 13:23 hat Markus Armbruster geschrieben:
Max Reitz mre...@redhat.com writes:
On 2014-12-05 at 10:52, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
abort() has the sometimes undesirable side-effect of generating a core
dump. If that is not needed,
On 2014-12-05 at 13:23, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
On 2014-12-05 at 10:52, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
abort() has the sometimes undesirable side-effect of generating a core
dump. If that is not needed, SIGKILL has the same
On 12/05/2014 03:08 AM, Max Reitz wrote:
Introduce a new QMP command 'blockdev-change-medium' which is intended
to replace the 'change' command for block devices. The existing function
qmp_change_blockdev() is accordingly renamed to
qmp_blockdev_change_medium().
Signed-off-by: Max Reitz
On 12/05/2014 03:08 AM, Max Reitz wrote:
The 'change' QMP and HMP command allows replacing the medium in drives
which support this, e.g. floppy disk drives. For some drives, the medium
carries information about whether it can be written to or not (again,
floppy drives). Therefore, it should be
Hi Frank,
On Fri, 5 Dec 2014 10:19:59 +0100
Frank Blaschka blasc...@linux.vnet.ibm.com wrote:
From: Frank Blaschka frank.blasc...@de.ibm.com
This patch implements the last remaining s390 pci instruction
to query the function information block.
Signed-off-by: Frank Blaschka
On 2014-12-05 at 14:10, Eric Blake wrote:
On 12/05/2014 03:08 AM, Max Reitz wrote:
Introduce a new QMP command 'blockdev-change-medium' which is intended
to replace the 'change' command for block devices. The existing function
qmp_change_blockdev() is accordingly renamed to
On 12/05/2014 03:08 AM, Max Reitz wrote:
Use separate code paths for the two overloaded functions of the 'change'
HMP command, and invoke the 'blockdev-change-medium' QMP command if used
on a block device (by calling qmp_blockdev_change_medium()).
Signed-off-by: Max Reitz mre...@redhat.com
On 12/05/2014 06:18 AM, Max Reitz wrote:
Should there be a way to empty a cdrom drive? That is, how do I change
a drive from visiting a file to being empty?
Doesn't 'eject' work?
Oh, good point. More cross-referencing documentation work, then :)
At which point, THIS command can keep a
On 2014-12-05 at 14:14, Eric Blake wrote:
On 12/05/2014 03:08 AM, Max Reitz wrote:
The 'change' QMP and HMP command allows replacing the medium in drives
which support this, e.g. floppy disk drives. For some drives, the medium
carries information about whether it can be written to or not
On 2014-12-05 at 14:24, Eric Blake wrote:
On 12/05/2014 03:08 AM, Max Reitz wrote:
Use separate code paths for the two overloaded functions of the 'change'
HMP command, and invoke the 'blockdev-change-medium' QMP command if used
on a block device (by calling qmp_blockdev_change_medium()).
On 12/05/2014 03:08 AM, Max Reitz wrote:
Add an option to qmp_blockdev_change_medium() which allows changing the
read-only status of the block device whose medium is changed.
Some drives do not have a inherently fixed read-only status; for
instance, floppy disks can be set read-only or
Max Reitz mre...@redhat.com writes:
The 'change' QMP and HMP command allows replacing the medium in drives
which support this, e.g. floppy disk drives. For some drives, the medium
carries information about whether it can be written to or not (again,
floppy drives). Therefore, it should be
On 12/05/2014 06:27 AM, Max Reitz wrote:
Hmm. Not a problem with this patch (which is just reorganizing control
flow), but a possible design issue. The old 'change' QMP command cannot
provide the encryption code, hence it cannot succeed when changing to an
encrypted media. But now that we
On 2014-12-05 at 14:31, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
The 'change' QMP and HMP command allows replacing the medium in drives
which support this, e.g. floppy disk drives. For some drives, the medium
carries information about whether it can be written to or not
On 12/05/2014 03:08 AM, Max Reitz wrote:
Expose the new read-only option of 'blockdev-change-medium' for the
'change' HMP command.
Signed-off-by: Max Reitz mre...@redhat.com
---
hmp-commands.hx | 20 +---
hmp.c | 21 -
2 files changed, 37
Hi there,
thank you very much for the QEMU advent calender! What a neat idea, I
enjoy it very much.
I'd like to add one suggestion: GRUB Invaders [1]. This is a multi-boot
compliant kernel game that allows to play Space Invaders from within
GRUB, i.e. without an operating system. I especially
chardev of type udp allows for specifying of localport and localaddr, but these
options are missing in qemu-sockets.c and so an error is reported from
socket_dgram when qemu_opt_set() is called against those options.
Tested and now correctly allows for setting local address and port of udp
From: Alex Friedman a...@e8storage.com
According to the specification, the low 16 bits should contain the number of
I/O submission queues, and the high 16 bits should contain the number of
I/O completion queues.
Signed-off-by: Alex Friedman a...@e8storage.com
---
hw/block/nvme.c | 6 --
1
Max Reitz mre...@redhat.com writes:
On 2014-12-05 at 13:23, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
On 2014-12-05 at 10:52, Markus Armbruster wrote:
Max Reitz mre...@redhat.com writes:
abort() has the sometimes undesirable side-effect of generating a core
dump. If
On 12/05/2014 06:47 AM, Max Reitz wrote:
I'd like to make sure that new commands to control removable media get
us closer to a sane set of such commands. Let's consider states and
transitions.
If we ignore the tray lock for a moment, we have:
load
These patches implement support for migration/save/load on AArch64
CPUs. The first one from Alex (with some mangling from me) just
moves the sysreg sync code we have for 32-bit across to 64-bit.
The second fills in the gaps in the main CPU vmstate struct.
Notes:
* currently doing 'from cold'
On 12/05/2014 06:59 AM, Markus Armbruster wrote:
Thus, -c abort is not always useful to simulate a qemu-io crash;
therefore, this patch adds a new sigraise command which allows to raise
any Unix signal.
I'd write allows to raise a signal, since I trust folks that have a
need for this
From: Alex Bennée alex.ben...@linaro.org
Before we launch a guest we query KVM for the list of co-processor
registers it knows about. This is used to synchronize system
register state for the bulk of coprocessor/system registers.
Move this code from the 32-bit specific vcpu init function into
a
For migration to work on 64 bit CPUs, we need to include both
the 64-bit integer register file and the PSTATE. Everything
else is either stored in the same place as existing 32-bit CPU
state or handled by the generic sysreg mechanism.
Signed-off-by: Peter Maydell peter.mayd...@linaro.org
---
The
On 2014-12-05 at 15:07, Eric Blake wrote:
On 12/05/2014 06:47 AM, Max Reitz wrote:
I'd like to make sure that new commands to control removable media get
us closer to a sane set of such commands. Let's consider states and
transitions.
If we ignore the tray lock for a moment, we have:
On Fri, Dec 05, 2014 at 12:49:22PM +0100, Kevin Wolf wrote:
Am 05.12.2014 um 11:26 hat Kevin Wolf geschrieben:
Like for most other image formats, vhdx images read as all zero in qemu
after their creation (we're taking advantage from the fact that qemu has
just created the image, because
On 12/11/2014 18:58, Maciej W. Rozycki wrote:
On Wed, 12 Nov 2014, Peter Maydell wrote:
@@ -208,12 +206,12 @@ int cpu_load(QEMUFile *f, void *opaque,
MIPSCPU *cpu = mips_env_get_cpu(env);
int i;
-if (version_id 3) {
+if (version_id != CPU_SAVE_VERSION) {
On Fri, Dec 05, 2014 at 12:07:19PM +0100, Kevin Wolf wrote:
Am 05.12.2014 um 11:26 hat Kevin Wolf geschrieben:
Like for most other image formats, vhdx images read as all zero in qemu
after their creation (we're taking advantage from the fact that qemu has
just created the image, because
On 2014-12-05 at 10:24, Max Reitz wrote:
On 2014-12-05 at 07:37, Fam Zheng wrote:
On Thu, 12/04 14:59, Max Reitz wrote:
On 2014-12-04 at 03:29, Fam Zheng wrote:
Also add version info for other transaction types.
Signed-off-by: Fam Zheng f...@redhat.com
---
blockdev.c | 81
On 12/05/2014 04:50 AM, Peter Lieven wrote:
Signed-off-by: Peter Lieven p...@kamp.de
---
block.c|2 ++
block/accounting.c |7 +++
block/qapi.c |2 ++
hmp.c |6 +-
include/block/accounting.h |3 +++
On 12/05/2014 04:50 AM, Peter Lieven wrote:
As it was not obvious (at least for me) where the 32 comes from;
add a constant for it.
Signed-off-by: Peter Lieven p...@kamp.de
---
hw/block/virtio-blk.c |2 +-
include/hw/virtio/virtio-blk.h |4 +++-
2 files changed, 4
On 20/11/2014 11:08, Maciej W. Rozycki wrote:
Rewrite the FPU register access parts of `mips_cpu_gdb_read_register'
and `mips_cpu_gdb_write_register' for consistency between each other.
Signed-off-by: Maciej W. Rozycki ma...@codesourcery.com
---
Hi,
This is the FPU register handling
On 12/04/2014 06:28 AM, Markus Armbruster wrote:
Markus Armbruster (2):
net: Fuse g_malloc(); memset() into g_new0()
net: Use g_new() friends where that makes obvious sense
Reviewed-by: Eric Blake ebl...@redhat.com
net/l2tpv3.c | 9 -
net/queue.c | 2 +-
net/slirp.c | 2
On 12/04/2014 06:46 AM, Markus Armbruster wrote:
Markus Armbruster (4):
x86: Drop superfluous conditionals around g_free()
x86: Fuse g_malloc(); memset() into g_malloc0()
x86: Use g_new() friends where that makes obvious sense
x86: Drop some superfluous casts from void *
On 05/12/2014 13:59, Pavel Dovgaluk wrote:
From: Paolo Bonzini [mailto:pbonz...@redhat.com]
On 05/12/2014 11:55, Pavel Dovgaluk wrote:
And why is can_do_io zero? :) Is the fix to move the place where
can_do_io becomes nonzero?
can_do_io is set by gen_io_start function.
As I understand,
On 3 December 2014 at 20:05, Greg Bellows greg.bell...@linaro.org wrote:
Adds base Vexpress class and machine objects and infrastructure. This is in
preparation for switching to the full QEMU object model. The base vexpress
infrastructure is intended to handle common vexpress details.
On 20/11/2014 11:15, Maciej W. Rozycki wrote:
Make CP0.Status writes made with the MTTC0 instruction respect this
register's mask just like all the other places. Also preserve the
current values of masked out bits.
Signed-off-by: Maciej W. Rozycki ma...@codesourcery.com
---
Hi,
This
On 3 December 2014 at 20:05, Greg Bellows greg.bell...@linaro.org wrote:
Added 'secure' qemu boolean option to qemu_machine_opts[].
Signed-off-by: Greg Bellows greg.bell...@linaro.org
---
vl.c | 4
1 file changed, 4 insertions(+)
diff --git a/vl.c b/vl.c
index eb89d62..5d640f7
On 3 December 2014 at 20:05, Greg Bellows greg.bell...@linaro.org wrote:
Add secure Vexpress machine specific property to allow override of the
default secure state configuration. By default, when using the QEMU
-kernel command line argument, Vexpress machines boot into NS/SVC. When using
On 3 December 2014 at 20:06, Greg Bellows greg.bell...@linaro.org wrote:
Add an unset_feature() function to compliment the set_feature() function.
This
will be used to disable functions after they have been enabled during
initialization.
Signed-off-by: Greg Bellows greg.bell...@linaro.org
On 20/11/2014 16:00, Maciej W. Rozycki wrote:
Replace the 20Kc original MIPS64 ISA processor used for 64-bit user
emulation with the 5KEf processor that implements the MIPS64r2 ISA,
complementing the choice of the 24Kf processor for 32-bit emulation.
Signed-off-by: Maciej W. Rozycki
On 3 December 2014 at 20:06, Greg Bellows greg.bell...@linaro.org wrote:
Added a secure state property to the ARMCPU descriptor. This property
indicates whether the ARMCPU is enabled for secure state or not. By default
it
is disabled at this time.
Shouldn't this feature be has_el3 ? It's
Currently, qemu-img can not create qcow2 image format on rbd server. Analysis
the code as followings:
when create qcow2 format image:
qcow2_create2
bdrv_create_file(filename, opts, local_err); -- Here will create a 0 size
file(e.g: file1) on rbd server.
...
ret = bdrv_pwrite(bs, 0,
On 5 December 2014 at 09:18, Peter Maydell peter.mayd...@linaro.org wrote:
On 3 December 2014 at 20:05, Greg Bellows greg.bell...@linaro.org wrote:
Added 'secure' qemu boolean option to qemu_machine_opts[].
Signed-off-by: Greg Bellows greg.bell...@linaro.org
---
vl.c | 4
1
On 5 December 2014 at 15:33, Greg Bellows greg.bell...@linaro.org wrote:
On 5 December 2014 at 09:18, Peter Maydell peter.mayd...@linaro.org wrote:
On 3 December 2014 at 20:05, Greg Bellows greg.bell...@linaro.org wrote:
Added 'secure' qemu boolean option to qemu_machine_opts[].
On 04/12/2014 14:46, Markus Armbruster wrote:
Markus Armbruster (4):
x86: Drop superfluous conditionals around g_free()
x86: Fuse g_malloc(); memset() into g_malloc0()
x86: Use g_new() friends where that makes obvious sense
x86: Drop some superfluous casts from void *
On 12/05/2014 04:50 AM, Peter Lieven wrote:
this patch finally introduce multiread support to virtio-blk while
s/introduce/introduces/
s/virtio-blk while/virtio-blk. While/
multiwrite support was there for a long time read support was missing.
s/time/time,/
To achieve this the patch does
On Fri, 5 Dec 2014, a...@e8storage.com wrote:
From: Alex Friedman a...@e8storage.com
According to the specification, the low 16 bits should contain the number of
I/O submission queues, and the high 16 bits should contain the number of
I/O completion queues.
Signed-off-by: Alex Friedman
On 05/12/2014 14:00, Ming Lei wrote:
Since QEMU claims to support UNMAP, WRITE SAME and WRITE SAME 16
in the LBP VPD page, it is better to provide max write same length
in response for block limits VPD page because:
- T10 SBC-3 doesn't describe priority explicitly when all three
1 - 100 of 174 matches
Mail list logo
