Public bug reported:
While qemu's scalar emulation tends to be excellent, qemu's SIMD
emulation tends to be incorrect (except for arm64 from x86_64)--i have
found this both for mipsel and arm32. Until these code paths are
audited, which is probably a large job, it would be nice if qemu knew
its
Here is a pull request for the zig language that runs into this problems
in qemu https://github.com/ziglang/zig/pull/2945/
I have more code for validation if someone is working on this.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to
Linux kernel 5.4 will introduce a new memory map for SWIM device.
(aee6bff1c325 ("m68k: mac: Revisit floppy disc controller base addresses"))
Until this release all MMIO are mapped between 0x50f0 and 0x50f4,
but it appears that for real hardware 0x50f0 is not the base address:
the
On 11/2/19 9:28 PM, Philippe Mathieu-Daudé wrote:
Hi Paolo,
On 10/30/19 10:44 AM, Philippe Mathieu-Daudé wrote:
Hi Peter, Paolo,
On 10/30/19 7:15 AM, Peter Maydell wrote:
On Mon, 28 Oct 2019 at 17:48, Philippe Mathieu-Daudé
wrote:
Hi Paolo,
On 10/30/19 10:44 AM, Philippe Mathieu-Daudé wrote:
Hi Peter, Paolo,
On 10/30/19 7:15 AM, Peter Maydell wrote:
On Mon, 28 Oct 2019 at 17:48, Philippe Mathieu-Daudé
wrote:
The i440FX northbridge is only used by the
Le 02/11/2019 à 20:41, Philippe Mathieu-Daudé a écrit :
> On 11/2/19 6:15 PM, Laurent Vivier wrote:
>> address_space_rw() access size must be multiplied by the width.
>>
>> This fixes DHCP for Q800 guest.
>>
>> Signed-off-by: Laurent Vivier
>> ---
>> hw/net/dp8393x.c | 2 +-
>> 1 file changed,
Cc'ing the SPARC maintainers.
On 11/1/19 4:49 AM, Zainuddin AR wrote:
Hi,
I like to find to find out if you have a working qemu on solaris 10 or
11. I have tried the qemu-sun4vniagara but without networking. Is the
networking support for niagara version available?
Regards
Zai
Le 02/11/2019 à 20:54, Philippe Mathieu-Daudé a écrit :
> On 11/2/19 7:10 PM, Laurent Vivier wrote:
>> Paolo,
>>
>> the RFC was mainly for you:
>>
>> Is this the good way to replicate 256 times a memory chunk containing a
>> bunch of different MMIO spaces?
>
> I asked Richard about this and he
On 11/2/19 7:10 PM, Laurent Vivier wrote:
Paolo,
the RFC was mainly for you:
Is this the good way to replicate 256 times a memory chunk containing a
bunch of different MMIO spaces?
I asked Richard about this and he said this is OK because this is
the FlatView memory tree. It is then
On 11/2/19 6:15 PM, Laurent Vivier wrote:
address_space_rw() access size must be multiplied by the width.
This fixes DHCP for Q800 guest.
Signed-off-by: Laurent Vivier
---
hw/net/dp8393x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/net/dp8393x.c
On Fri, 1 Nov 2019 at 16:17, Palmer Dabbelt wrote:
>
> The following changes since commit b7c9a7f353c0e260519bf735ff0d4aa01e72784b:
>
> Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into
> staging (2019-10-31 15:57:30 +)
>
> are available in the Git repository at:
>
>
Paolo,
the RFC was mainly for you:
Is this the good way to replicate 256 times a memory chunk containing a
bunch of different MMIO spaces?
...
> +/*
> + * Memory from VIA_BASE to VIA_BASE + 0x4 is repeated
> + * from VIA_BASE + 0x4 to VIA_BASE + 0x400
> + */
> +
Le 01/11/2019 à 01:00, Philippe Mathieu-Daudé a écrit :
> On 10/31/19 11:03 AM, Laurent Vivier wrote:
>> Linux kernel 5.4 will introduce a new memory map for SWIM device.
>> (aee6bff1c325 ("m68k: mac: Revisit floppy disc controller base
>> addresses"))
>>
>> Until this release all MMIO are mapped
On Fri, 1 Nov 2019 at 14:25, Andrew Jones wrote:
>
> On Fri, Nov 01, 2019 at 12:53:42PM +, Peter Maydell wrote:
> > On Fri, 1 Nov 2019 at 10:34, Peter Maydell wrote:
> > >
> > > On Fri, 1 Nov 2019 at 09:54, Andrew Jones wrote:
> > > > Darn it. Sorry about that, but if it's still failing
address_space_rw() access size must be multiplied by the width.
This fixes DHCP for Q800 guest.
Signed-off-by: Laurent Vivier
---
hw/net/dp8393x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index 85d3f3788e..b8c4473f99 100644
---
Move it from the stack.
It's only 24 bytes, and this simplifies the dp8393x_get()/
dp8393x_put() interface.
Signed-off-by: Laurent Vivier
---
hw/net/dp8393x.c | 105 ++-
1 file changed, 50 insertions(+), 55 deletions(-)
diff --git a/hw/net/dp8393x.c
The card is not able to exit from exhaustion state, because
while the drive consumes the buffers, the RRP is incremented
(when the driver clears the ISR RBE bit), so it stays equal
to RWP, and while RRP == RWP, the card thinks it is always
in exhaustion state. So the driver consumes all the
This series starts with a cleanup of the DMA buffer, moving
it from the stack to the state structure.
The following patch allows to negociate the IP address with
the DHCP server.
The last one fixes the buffer exhaustion case.
With this series Q800 networking card is fully functionnal.
Laurent
On Sat, Nov 2, 2019 at 12:43 PM Philippe Mathieu-Daudé
wrote:
>
> From: Bruce Rogers
>
> Commit 0d5fae3e52e introduced bios-microvm.bin but forgot to add
> it to the list of blobs being installed.
> Add it to the list of BLOBS that get installed.
>
> Fixes: 0d5fae3e52e "roms: add microvm-bios
On Thu, Oct 24, 2019 at 08:34:33AM -0400, Liu Yi L wrote:
> The present bit check for pasid entry (pe) and pasid directory
> entry (pdire) were missed in previous commits as fpd bit check
> doesn't require present bit as "Set". This patch adds the present
> bit check for callers which wants to get
On Thu, Oct 24, 2019 at 08:34:32AM -0400, Liu Yi L wrote:
> This patch adds PASID cache invalidation handling. When guest enabled
> PASID usages (e.g. SVA), guest software should issue a proper PASID
> cache invalidation when caching-mode is exposed. This patch only adds
> the draft handling of
With the Quadra 800 emulation, mos6522 timers processing can consume
until 70% of the host CPU time with an idle guest (I guess the problem
should also happen with PowerMac emulation).
On a recent system, it can be painless (except if you look at top), but
on an old host like a PowerMac G5 the
From: Bruce Rogers
Commit 0d5fae3e52e introduced bios-microvm.bin but forgot to add
it to the list of blobs being installed.
Add it to the list of BLOBS that get installed.
Fixes: 0d5fae3e52e "roms: add microvm-bios (qboot) as binary"
Signed-off-by: Bruce Rogers
[PMD: Reworded description]
On Tue, 29 Oct 2019 at 13:25, Alistair Francis wrote:
>
> On Fri, Oct 25, 2019 at 6:28 AM Anup Patel wrote:
> >
> > This series adds RTC device to QEMU RISC-V virt machine. We have
> > selected Goldfish RTC device model for this. It's a pretty simple
> > synthetic device with few MMIO registers
Le 29/10/2019 à 23:43, Josh Kunz a écrit :
> This change includes support for all AF_NETLINK socket options up to about
> kernel version 5.4 (5.4 is not formally released at the time of writing).
> Socket options that were introduced in kernel versions before the oldest
> currently stable kernel
Jordi Pujol, le sam. 02 nov. 2019 08:41:52 +0100, a ecrit:
> @@ -909,6 +910,12 @@ static int slirp_smb(SlirpState* s, cons
> CONFIG_SMBD_COMMAND, s->smb_dir, smb_conf);
> g_free(smb_conf);
>
> +options = g_getenv("SMBDOPTIONS");
> +if (options) {
> +smb_cmdline
From: Jordi Pujol Palomer
Date: Sat, 2 Nov 2019 08:54:14 +0200
Subject: [PATCH v4] QEMU samba daemon: additional command line options
The smbd daemon takes additional command line options
from environment variable SMBDOPTIONS.
Set the environment variable SMBDOPTIONS before executing qemu.
> From: Jason Wang [mailto:jasow...@redhat.com]
> Sent: Friday, November 1, 2019 4:10 PM
>
>
> On 2019/11/1 下午4:04, Jason Wang wrote:
> >
> > On 2019/11/1 下午3:46, Tian, Kevin wrote:
> >>> From: Jason Wang [mailto:jasow...@redhat.com]
> >>> Sent: Friday, November 1, 2019 3:30 PM
> >>>
> >>>
> >>>
28 matches
Mail list logo
