From: Michael Rolnik <mrol...@gmail.com>
This includes:
- MOV, MOVW
- LDI, LDS LDX LDY LDZ
- LDDY, LDDZ
- STS, STX STY STZ
- STDY, STDZ
- LPM, LPMX
- ELPM, ELPMX
- SPM, SPMX
- IN, OUT
- PUSH, POP
- XCH
- LAS, LAC LAT
Signed-off-by: Michael Rolnik <mrol...@gmail.com>
Signed-off-by: Richard Henderson <richard.hender...@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.m...@gmail.com>
Tested-by: Philippe Mathieu-Daudé <phi...@redhat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.m.m...@gmail.com>
Signed-off-by: Thomas Huth <h...@tuxfamily.org>
Message-Id: <20200705140315.260514-14-h...@tuxfamily.org>
Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org>
---
target/avr/insn.decode | 56 +++
target/avr/translate.c | 990 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 1046 insertions(+)
diff --git a/target/avr/insn.decode b/target/avr/insn.decode
index 851eddedc7..279ddfbc0c 100644
--- a/target/avr/insn.decode
+++ b/target/avr/insn.decode
@@ -107,3 +107,59 @@ SBIC 1001 1001 reg:5 bit:3
SBIS 1001 1011 reg:5 bit:3
BRBS 1111 00 ....... ... @op_bit_imm
BRBC 1111 01 ....... ... @op_bit_imm
+
+#
+# Data Transfer Instructions
+#
+
+%rd_d 4:4 !function=to_regs_00_30_by_two
+%rr_d 0:4 !function=to_regs_00_30_by_two
+
+@io_rd_imm .... . .. ..... .... &rd_imm rd=%rd imm=%io_imm
+@ldst_d .. . . .. . rd:5 . ... &rd_imm imm=%ldst_d_imm
+
+# The 16-bit immediate is completely in the next word.
+# Fields cannot be defined with no bits, so we cannot play
+# the same trick and append to a zero-bit value.
+# Defer reading the immediate until trans_{LDS,STS}.
+@ldst_s .... ... rd:5 .... imm=0
+
+MOV 0010 11 . ..... .... @op_rd_rr
+MOVW 0000 0001 .... .... &rd_rr rd=%rd_d rr=%rr_d
+LDI 1110 .... .... .... @op_rd_imm8
+LDS 1001 000 ..... 0000 @ldst_s
+LDX1 1001 000 rd:5 1100
+LDX2 1001 000 rd:5 1101
+LDX3 1001 000 rd:5 1110
+LDY2 1001 000 rd:5 1001
+LDY3 1001 000 rd:5 1010
+LDZ2 1001 000 rd:5 0001
+LDZ3 1001 000 rd:5 0010
+LDDY 10 . 0 .. 0 ..... 1 ... @ldst_d
+LDDZ 10 . 0 .. 0 ..... 0 ... @ldst_d
+STS 1001 001 ..... 0000 @ldst_s
+STX1 1001 001 rr:5 1100
+STX2 1001 001 rr:5 1101
+STX3 1001 001 rr:5 1110
+STY2 1001 001 rd:5 1001
+STY3 1001 001 rd:5 1010
+STZ2 1001 001 rd:5 0001
+STZ3 1001 001 rd:5 0010
+STDY 10 . 0 .. 1 ..... 1 ... @ldst_d
+STDZ 10 . 0 .. 1 ..... 0 ... @ldst_d
+LPM1 1001 0101 1100 1000
+LPM2 1001 000 rd:5 0100
+LPMX 1001 000 rd:5 0101
+ELPM1 1001 0101 1101 1000
+ELPM2 1001 000 rd:5 0110
+ELPMX 1001 000 rd:5 0111
+SPM 1001 0101 1110 1000
+SPMX 1001 0101 1111 1000
+IN 1011 0 .. ..... .... @io_rd_imm
+OUT 1011 1 .. ..... .... @io_rd_imm
+PUSH 1001 001 rd:5 1111
+POP 1001 000 rd:5 1111
+XCH 1001 001 rd:5 0100
+LAC 1001 001 rd:5 0110
+LAS 1001 001 rd:5 0101
+LAT 1001 001 rd:5 0111
diff --git a/target/avr/translate.c b/target/avr/translate.c
index 5581264045..fce8b5af9a 100644
--- a/target/avr/translate.c
+++ b/target/avr/translate.c
@@ -143,6 +143,10 @@ static int to_regs_24_30_by_two(DisasContext *ctx, int
indx)
return 24 + (indx % 4) * 2;
}
+static int to_regs_00_30_by_two(DisasContext *ctx, int indx)
+{
+ return (indx % 16) * 2;
+}
static uint16_t next_word(DisasContext *ctx)
{
@@ -1503,3 +1507,989 @@ static bool trans_BRBS(DisasContext *ctx, arg_BRBS *a)
ctx->bstate = DISAS_CHAIN;
return true;
}
+
+/*
+ * Data Transfer Instructions
+ */
+
+/*
+ * in the gen_set_addr & gen_get_addr functions
+ * H assumed to be in 0x00ff0000 format
+ * M assumed to be in 0x000000ff format
+ * L assumed to be in 0x000000ff format
+ */
+static void gen_set_addr(TCGv addr, TCGv H, TCGv M, TCGv L)
+{
+
+ tcg_gen_andi_tl(L, addr, 0x000000ff);
+
+ tcg_gen_andi_tl(M, addr, 0x0000ff00);
+ tcg_gen_shri_tl(M, M, 8);
+
+ tcg_gen_andi_tl(H, addr, 0x00ff0000);
+}
+
+static void gen_set_xaddr(TCGv addr)
+{
+ gen_set_addr(addr, cpu_rampX, cpu_r[27], cpu_r[26]);
+}
+
+static void gen_set_yaddr(TCGv addr)
+{
+ gen_set_addr(addr, cpu_rampY, cpu_r[29], cpu_r[28]);
+}
+
+static void gen_set_zaddr(TCGv addr)
+{
+ gen_set_addr(addr, cpu_rampZ, cpu_r[31], cpu_r[30]);
+}
+
+static TCGv gen_get_addr(TCGv H, TCGv M, TCGv L)
+{
+ TCGv addr = tcg_temp_new_i32();
+
+ tcg_gen_deposit_tl(addr, M, H, 8, 8);
+ tcg_gen_deposit_tl(addr, L, addr, 8, 16);
+
+ return addr;
+}
+
+static TCGv gen_get_xaddr(void)
+{
+ return gen_get_addr(cpu_rampX, cpu_r[27], cpu_r[26]);
+}
+
+static TCGv gen_get_yaddr(void)
+{
+ return gen_get_addr(cpu_rampY, cpu_r[29], cpu_r[28]);
+}
+
+static TCGv gen_get_zaddr(void)
+{
+ return gen_get_addr(cpu_rampZ, cpu_r[31], cpu_r[30]);
+}
+
+/*
+ * Load one byte indirect from data space to register and stores an clear
+ * the bits in data space specified by the register. The instruction can only
+ * be used towards internal SRAM. The data location is pointed to by the Z
(16
+ * bits) Pointer Register in the Register File. Memory access is limited to
the
+ * current data segment of 64KB. To access another data segment in devices
with
+ * more than 64KB data space, the RAMPZ in register in the I/O area has to be
+ * changed. The Z-pointer Register is left unchanged by the operation. This
+ * instruction is especially suited for clearing status bits stored in SRAM.
+ */
+static void gen_data_store(DisasContext *ctx, TCGv data, TCGv addr)
+{
+ if (ctx->tb->flags & TB_FLAGS_FULL_ACCESS) {
+ gen_helper_fullwr(cpu_env, data, addr);
+ } else {
+ tcg_gen_qemu_st8(data, addr, MMU_DATA_IDX); /* mem[addr] = data */
+ }
+}
+
+static void gen_data_load(DisasContext *ctx, TCGv data, TCGv addr)
+{
+ if (ctx->tb->flags & TB_FLAGS_FULL_ACCESS) {
+ gen_helper_fullrd(data, cpu_env, addr);
+ } else {
+ tcg_gen_qemu_ld8u(data, addr, MMU_DATA_IDX); /* data = mem[addr] */
+ }
+}
+
+/*
+ * This instruction makes a copy of one register into another. The source
+ * register Rr is left unchanged, while the destination register Rd is loaded
+ * with a copy of Rr.
+ */
+static bool trans_MOV(DisasContext *ctx, arg_MOV *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv Rr = cpu_r[a->rr];
+
+ tcg_gen_mov_tl(Rd, Rr);
+
+ return true;
+}
+
+/*
+ * This instruction makes a copy of one register pair into another register
+ * pair. The source register pair Rr+1:Rr is left unchanged, while the
+ * destination register pair Rd+1:Rd is loaded with a copy of Rr + 1:Rr. This
+ * instruction is not available in all devices. Refer to the device specific
+ * instruction set summary.
+ */
+static bool trans_MOVW(DisasContext *ctx, arg_MOVW *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_MOVW)) {
+ return true;
+ }
+
+ TCGv RdL = cpu_r[a->rd];
+ TCGv RdH = cpu_r[a->rd + 1];
+ TCGv RrL = cpu_r[a->rr];
+ TCGv RrH = cpu_r[a->rr + 1];
+
+ tcg_gen_mov_tl(RdH, RrH);
+ tcg_gen_mov_tl(RdL, RrL);
+
+ return true;
+}
+
+/*
+ * Loads an 8 bit constant directly to register 16 to 31.
+ */
+static bool trans_LDI(DisasContext *ctx, arg_LDI *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ int imm = a->imm;
+
+ tcg_gen_movi_tl(Rd, imm);
+
+ return true;
+}
+
+/*
+ * Loads one byte from the data space to a register. For parts with SRAM,
+ * the data space consists of the Register File, I/O memory and internal SRAM
+ * (and external SRAM if applicable). For parts without SRAM, the data space
+ * consists of the register file only. The EEPROM has a separate address
space.
+ * A 16-bit address must be supplied. Memory access is limited to the current
+ * data segment of 64KB. The LDS instruction uses the RAMPD Register to access
+ * memory above 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPD in register in the I/O area has to be changed.
+ * This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_LDS(DisasContext *ctx, arg_LDS *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_rampD;
+ a->imm = next_word(ctx);
+
+ tcg_gen_mov_tl(addr, H); /* addr = H:M:L */
+ tcg_gen_shli_tl(addr, addr, 16);
+ tcg_gen_ori_tl(addr, addr, a->imm);
+
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte indirect from the data space to a register. For parts
+ * with SRAM, the data space consists of the Register File, I/O memory and
+ * internal SRAM (and external SRAM if applicable). For parts without SRAM,
the
+ * data space consists of the Register File only. In some parts the Flash
+ * Memory has been mapped to the data space and can be read using this
command.
+ * The EEPROM has a separate address space. The data location is pointed to
by
+ * the X (16 bits) Pointer Register in the Register File. Memory access is
+ * limited to the current data segment of 64KB. To access another data segment
+ * in devices with more than 64KB data space, the RAMPX in register in the I/O
+ * area has to be changed. The X-pointer Register can either be left
unchanged
+ * by the operation, or it can be post-incremented or predecremented. These
+ * features are especially suited for accessing arrays, tables, and Stack
+ * Pointer usage of the X-pointer Register. Note that only the low byte of the
+ * X-pointer is updated in devices with no more than 256 bytes data space. For
+ * such devices, the high byte of the pointer is not used by this instruction
+ * and can be used for other purposes. The RAMPX Register in the I/O area is
+ * updated in parts with more than 64KB data space or more than 64KB Program
+ * memory, and the increment/decrement is added to the entire 24-bit address
on
+ * such devices. Not all variants of this instruction is available in all
+ * devices. Refer to the device specific instruction set summary. In the
+ * Reduced Core tinyAVR the LD instruction can be used to achieve the same
+ * operation as LPM since the program memory is mapped to the data memory
+ * space.
+ */
+static bool trans_LDX1(DisasContext *ctx, arg_LDX1 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDX2(DisasContext *ctx, arg_LDX2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_load(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDX3(DisasContext *ctx, arg_LDX3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_xaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_load(ctx, Rd, addr);
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte indirect with or without displacement from the data space
+ * to a register. For parts with SRAM, the data space consists of the Register
+ * File, I/O memory and internal SRAM (and external SRAM if applicable). For
+ * parts without SRAM, the data space consists of the Register File only. In
+ * some parts the Flash Memory has been mapped to the data space and can be
+ * read using this command. The EEPROM has a separate address space. The data
+ * location is pointed to by the Y (16 bits) Pointer Register in the Register
+ * File. Memory access is limited to the current data segment of 64KB. To
+ * access another data segment in devices with more than 64KB data space, the
+ * RAMPY in register in the I/O area has to be changed. The Y-pointer
Register
+ * can either be left unchanged by the operation, or it can be
post-incremented
+ * or predecremented. These features are especially suited for accessing
+ * arrays, tables, and Stack Pointer usage of the Y-pointer Register. Note
that
+ * only the low byte of the Y-pointer is updated in devices with no more than
+ * 256 bytes data space. For such devices, the high byte of the pointer is not
+ * used by this instruction and can be used for other purposes. The RAMPY
+ * Register in the I/O area is updated in parts with more than 64KB data space
+ * or more than 64KB Program memory, and the increment/decrement/displacement
+ * is added to the entire 24-bit address on such devices. Not all variants of
+ * this instruction is available in all devices. Refer to the device specific
+ * instruction set summary. In the Reduced Core tinyAVR the LD instruction
can
+ * be used to achieve the same operation as LPM since the program memory is
+ * mapped to the data memory space.
+ */
+static bool trans_LDY2(DisasContext *ctx, arg_LDY2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ gen_data_load(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDY3(DisasContext *ctx, arg_LDY3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_load(ctx, Rd, addr);
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDDY(DisasContext *ctx, arg_LDDY *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte indirect with or without displacement from the data space
+ * to a register. For parts with SRAM, the data space consists of the Register
+ * File, I/O memory and internal SRAM (and external SRAM if applicable). For
+ * parts without SRAM, the data space consists of the Register File only. In
+ * some parts the Flash Memory has been mapped to the data space and can be
+ * read using this command. The EEPROM has a separate address space. The data
+ * location is pointed to by the Z (16 bits) Pointer Register in the Register
+ * File. Memory access is limited to the current data segment of 64KB. To
+ * access another data segment in devices with more than 64KB data space, the
+ * RAMPZ in register in the I/O area has to be changed. The Z-pointer
Register
+ * can either be left unchanged by the operation, or it can be
post-incremented
+ * or predecremented. These features are especially suited for Stack Pointer
+ * usage of the Z-pointer Register, however because the Z-pointer Register can
+ * be used for indirect subroutine calls, indirect jumps and table lookup, it
+ * is often more convenient to use the X or Y-pointer as a dedicated Stack
+ * Pointer. Note that only the low byte of the Z-pointer is updated in devices
+ * with no more than 256 bytes data space. For such devices, the high byte of
+ * the pointer is not used by this instruction and can be used for other
+ * purposes. The RAMPZ Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the
+ * increment/decrement/displacement is added to the entire 24-bit address on
+ * such devices. Not all variants of this instruction is available in all
+ * devices. Refer to the device specific instruction set summary. In the
+ * Reduced Core tinyAVR the LD instruction can be used to achieve the same
+ * operation as LPM since the program memory is mapped to the data memory
+ * space. For using the Z-pointer for table lookup in Program memory see the
+ * LPM and ELPM instructions.
+ */
+static bool trans_LDZ2(DisasContext *ctx, arg_LDZ2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ gen_data_load(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDZ3(DisasContext *ctx, arg_LDZ3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_load(ctx, Rd, addr);
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LDDZ(DisasContext *ctx, arg_LDDZ *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_load(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte from a Register to the data space. For parts with SRAM,
+ * the data space consists of the Register File, I/O memory and internal SRAM
+ * (and external SRAM if applicable). For parts without SRAM, the data space
+ * consists of the Register File only. The EEPROM has a separate address
space.
+ * A 16-bit address must be supplied. Memory access is limited to the current
+ * data segment of 64KB. The STS instruction uses the RAMPD Register to access
+ * memory above 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPD in register in the I/O area has to be changed.
+ * This instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ */
+static bool trans_STS(DisasContext *ctx, arg_STS *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_rampD;
+ a->imm = next_word(ctx);
+
+ tcg_gen_mov_tl(addr, H); /* addr = H:M:L */
+ tcg_gen_shli_tl(addr, addr, 16);
+ tcg_gen_ori_tl(addr, addr, a->imm);
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte indirect from a register to data space. For parts with SRAM,
+ * the data space consists of the Register File, I/O memory, and internal SRAM
+ * (and external SRAM if applicable). For parts without SRAM, the data space
+ * consists of the Register File only. The EEPROM has a separate address space.
+ *
+ * The data location is pointed to by the X (16 bits) Pointer Register in the
+ * Register File. Memory access is limited to the current data segment of 64KB.
+ * To access another data segment in devices with more than 64KB data space,
the
+ * RAMPX in register in the I/O area has to be changed.
+ *
+ * The X-pointer Register can either be left unchanged by the operation, or it
+ * can be post-incremented or pre-decremented. These features are especially
+ * suited for accessing arrays, tables, and Stack Pointer usage of the
+ * X-pointer Register. Note that only the low byte of the X-pointer is updated
+ * in devices with no more than 256 bytes data space. For such devices, the
high
+ * byte of the pointer is not used by this instruction and can be used for
other
+ * purposes. The RAMPX Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the increment /
+ * decrement is added to the entire 24-bit address on such devices.
+ */
+static bool trans_STX1(DisasContext *ctx, arg_STX1 *a)
+{
+ TCGv Rd = cpu_r[a->rr];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STX2(DisasContext *ctx, arg_STX2 *a)
+{
+ TCGv Rd = cpu_r[a->rr];
+ TCGv addr = gen_get_xaddr();
+
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STX3(DisasContext *ctx, arg_STX3 *a)
+{
+ TCGv Rd = cpu_r[a->rr];
+ TCGv addr = gen_get_xaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_store(ctx, Rd, addr);
+ gen_set_xaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte indirect with or without displacement from a register to
data
+ * space. For parts with SRAM, the data space consists of the Register File,
I/O
+ * memory, and internal SRAM (and external SRAM if applicable). For parts
+ * without SRAM, the data space consists of the Register File only. The EEPROM
+ * has a separate address space.
+ *
+ * The data location is pointed to by the Y (16 bits) Pointer Register in the
+ * Register File. Memory access is limited to the current data segment of 64KB.
+ * To access another data segment in devices with more than 64KB data space,
the
+ * RAMPY in register in the I/O area has to be changed.
+ *
+ * The Y-pointer Register can either be left unchanged by the operation, or it
+ * can be post-incremented or pre-decremented. These features are especially
+ * suited for accessing arrays, tables, and Stack Pointer usage of the
Y-pointer
+ * Register. Note that only the low byte of the Y-pointer is updated in devices
+ * with no more than 256 bytes data space. For such devices, the high byte of
+ * the pointer is not used by this instruction and can be used for other
+ * purposes. The RAMPY Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the increment /
+ * decrement / displacement is added to the entire 24-bit address on such
+ * devices.
+ */
+static bool trans_STY2(DisasContext *ctx, arg_STY2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STY3(DisasContext *ctx, arg_STY3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_store(ctx, Rd, addr);
+ gen_set_yaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STDY(DisasContext *ctx, arg_STDY *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_yaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Stores one byte indirect with or without displacement from a register to
data
+ * space. For parts with SRAM, the data space consists of the Register File,
I/O
+ * memory, and internal SRAM (and external SRAM if applicable). For parts
+ * without SRAM, the data space consists of the Register File only. The EEPROM
+ * has a separate address space.
+ *
+ * The data location is pointed to by the Y (16 bits) Pointer Register in the
+ * Register File. Memory access is limited to the current data segment of 64KB.
+ * To access another data segment in devices with more than 64KB data space,
the
+ * RAMPY in register in the I/O area has to be changed.
+ *
+ * The Y-pointer Register can either be left unchanged by the operation, or it
+ * can be post-incremented or pre-decremented. These features are especially
+ * suited for accessing arrays, tables, and Stack Pointer usage of the
Y-pointer
+ * Register. Note that only the low byte of the Y-pointer is updated in devices
+ * with no more than 256 bytes data space. For such devices, the high byte of
+ * the pointer is not used by this instruction and can be used for other
+ * purposes. The RAMPY Register in the I/O area is updated in parts with more
+ * than 64KB data space or more than 64KB Program memory, and the increment /
+ * decrement / displacement is added to the entire 24-bit address on such
+ * devices.
+ */
+static bool trans_STZ2(DisasContext *ctx, arg_STZ2 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STZ3(DisasContext *ctx, arg_STZ3 *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
+ gen_data_store(ctx, Rd, addr);
+
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_STDZ(DisasContext *ctx, arg_STDZ *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
+ gen_data_store(ctx, Rd, addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte pointed to by the Z-register into the destination
+ * register Rd. This instruction features a 100% space effective constant
+ * initialization or constant data fetch. The Program memory is organized in
+ * 16-bit words while the Z-pointer is a byte address. Thus, the least
+ * significant bit of the Z-pointer selects either low byte (ZLSB = 0) or high
+ * byte (ZLSB = 1). This instruction can address the first 64KB (32K words) of
+ * Program memory. The Zpointer Register can either be left unchanged by the
+ * operation, or it can be incremented. The incrementation does not apply to
+ * the RAMPZ Register.
+ *
+ * Devices with Self-Programming capability can use the LPM instruction to
read
+ * the Fuse and Lock bit values.
+ */
+static bool trans_LPM1(DisasContext *ctx, arg_LPM1 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_LPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[0];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_r[31];
+ TCGv L = cpu_r[30];
+
+ tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
+ tcg_gen_or_tl(addr, addr, L);
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LPM2(DisasContext *ctx, arg_LPM2 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_LPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_r[31];
+ TCGv L = cpu_r[30];
+
+ tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
+ tcg_gen_or_tl(addr, addr, L);
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_LPMX(DisasContext *ctx, arg_LPMX *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_LPMX)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = tcg_temp_new_i32();
+ TCGv H = cpu_r[31];
+ TCGv L = cpu_r[30];
+
+ tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
+ tcg_gen_or_tl(addr, addr, L);
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ tcg_gen_andi_tl(L, addr, 0xff);
+ tcg_gen_shri_tl(addr, addr, 8);
+ tcg_gen_andi_tl(H, addr, 0xff);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Loads one byte pointed to by the Z-register and the RAMPZ Register in
+ * the I/O space, and places this byte in the destination register Rd. This
+ * instruction features a 100% space effective constant initialization or
+ * constant data fetch. The Program memory is organized in 16-bit words while
+ * the Z-pointer is a byte address. Thus, the least significant bit of the
+ * Z-pointer selects either low byte (ZLSB = 0) or high byte (ZLSB = 1). This
+ * instruction can address the entire Program memory space. The Z-pointer
+ * Register can either be left unchanged by the operation, or it can be
+ * incremented. The incrementation applies to the entire 24-bit concatenation
+ * of the RAMPZ and Z-pointer Registers.
+ *
+ * Devices with Self-Programming capability can use the ELPM instruction to
+ * read the Fuse and Lock bit value.
+ */
+static bool trans_ELPM1(DisasContext *ctx, arg_ELPM1 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ELPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[0];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_ELPM2(DisasContext *ctx, arg_ELPM2 *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ELPM)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+static bool trans_ELPMX(DisasContext *ctx, arg_ELPMX *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_ELPMX)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+
+ tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
+ tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
+ gen_set_zaddr(addr);
+
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * SPM can be used to erase a page in the Program memory, to write a page
+ * in the Program memory (that is already erased), and to set Boot Loader Lock
+ * bits. In some devices, the Program memory can be written one word at a
time,
+ * in other devices an entire page can be programmed simultaneously after
first
+ * filling a temporary page buffer. In all cases, the Program memory must be
+ * erased one page at a time. When erasing the Program memory, the RAMPZ and
+ * Z-register are used as page address. When writing the Program memory, the
+ * RAMPZ and Z-register are used as page or word address, and the R1:R0
+ * register pair is used as data(1). When setting the Boot Loader Lock bits,
+ * the R1:R0 register pair is used as data. Refer to the device documentation
+ * for detailed description of SPM usage. This instruction can address the
+ * entire Program memory.
+ *
+ * The SPM instruction is not available in all devices. Refer to the device
+ * specific instruction set summary.
+ *
+ * Note: 1. R1 determines the instruction high byte, and R0 determines the
+ * instruction low byte.
+ */
+static bool trans_SPM(DisasContext *ctx, arg_SPM *a)
+{
+ /* TODO */
+ if (!avr_have_feature(ctx, AVR_FEATURE_SPM)) {
+ return true;
+ }
+
+ return true;
+}
+
+static bool trans_SPMX(DisasContext *ctx, arg_SPMX *a)
+{
+ /* TODO */
+ if (!avr_have_feature(ctx, AVR_FEATURE_SPMX)) {
+ return true;
+ }
+
+ return true;
+}
+
+/*
+ * Loads data from the I/O Space (Ports, Timers, Configuration Registers,
+ * etc.) into register Rd in the Register File.
+ */
+static bool trans_IN(DisasContext *ctx, arg_IN *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv port = tcg_const_i32(a->imm);
+
+ gen_helper_inb(Rd, cpu_env, port);
+
+ tcg_temp_free_i32(port);
+
+ return true;
+}
+
+/*
+ * Stores data from register Rr in the Register File to I/O Space (Ports,
+ * Timers, Configuration Registers, etc.).
+ */
+static bool trans_OUT(DisasContext *ctx, arg_OUT *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+ TCGv port = tcg_const_i32(a->imm);
+
+ gen_helper_outb(cpu_env, port, Rd);
+
+ tcg_temp_free_i32(port);
+
+ return true;
+}
+
+/*
+ * This instruction stores the contents of register Rr on the STACK. The
+ * Stack Pointer is post-decremented by 1 after the PUSH. This instruction is
+ * not available in all devices. Refer to the device specific instruction set
+ * summary.
+ */
+static bool trans_PUSH(DisasContext *ctx, arg_PUSH *a)
+{
+ TCGv Rd = cpu_r[a->rd];
+
+ gen_data_store(ctx, Rd, cpu_sp);
+ tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
+
+ return true;
+}
+
+/*
+ * This instruction loads register Rd with a byte from the STACK. The Stack
+ * Pointer is pre-incremented by 1 before the POP. This instruction is not
+ * available in all devices. Refer to the device specific instruction set
+ * summary.
+ */
+static bool trans_POP(DisasContext *ctx, arg_POP *a)
+{
+ /*
+ * Using a temp to work around some strange behaviour:
+ * tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
+ * gen_data_load(ctx, Rd, cpu_sp);
+ * seems to cause the add to happen twice.
+ * This doesn't happen if either the add or the load is removed.
+ */
+ TCGv t1 = tcg_temp_new_i32();
+ TCGv Rd = cpu_r[a->rd];
+
+ tcg_gen_addi_tl(t1, cpu_sp, 1);
+ gen_data_load(ctx, Rd, t1);
+ tcg_gen_mov_tl(cpu_sp, t1);
+
+ return true;
+}
+
+/*
+ * Exchanges one byte indirect between register and data space. The data
+ * location is pointed to by the Z (16 bits) Pointer Register in the Register
+ * File. Memory access is limited to the current data segment of 64KB. To
+ * access another data segment in devices with more than 64KB data space, the
+ * RAMPZ in register in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for writing/reading status bits stored in SRAM.
+ */
+static bool trans_XCH(DisasContext *ctx, arg_XCH *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv addr = gen_get_zaddr();
+
+ gen_data_load(ctx, t0, addr);
+ gen_data_store(ctx, Rd, addr);
+ tcg_gen_mov_tl(Rd, t0);
+
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Load one byte indirect from data space to register and set bits in data
+ * space specified by the register. The instruction can only be used towards
+ * internal SRAM. The data location is pointed to by the Z (16 bits) Pointer
+ * Register in the Register File. Memory access is limited to the current data
+ * segment of 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPZ in register in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for setting status bits stored in SRAM.
+ */
+static bool trans_LAS(DisasContext *ctx, arg_LAS *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rr = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
+ tcg_gen_or_tl(t1, t0, Rr);
+ tcg_gen_mov_tl(Rr, t0); /* Rr = t0 */
+ gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+/*
+ * Load one byte indirect from data space to register and stores and clear
+ * the bits in data space specified by the register. The instruction can
+ * only be used towards internal SRAM. The data location is pointed to by
+ * the Z (16 bits) Pointer Register in the Register File. Memory access is
+ * limited to the current data segment of 64KB. To access another data
+ * segment in devices with more than 64KB data space, the RAMPZ in register
+ * in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for clearing status bits stored in SRAM.
+ */
+static bool trans_LAC(DisasContext *ctx, arg_LAC *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rr = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
+ tcg_gen_andc_tl(t1, t0, Rr); /* t1 = t0 & (0xff - Rr) = t0 & ~Rr */
+ tcg_gen_mov_tl(Rr, t0); /* Rr = t0 */
+ gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
+
+
+/*
+ * Load one byte indirect from data space to register and toggles bits in
+ * the data space specified by the register. The instruction can only be used
+ * towards SRAM. The data location is pointed to by the Z (16 bits) Pointer
+ * Register in the Register File. Memory access is limited to the current data
+ * segment of 64KB. To access another data segment in devices with more than
+ * 64KB data space, the RAMPZ in register in the I/O area has to be changed.
+ *
+ * The Z-pointer Register is left unchanged by the operation. This instruction
+ * is especially suited for changing status bits stored in SRAM.
+ */
+static bool trans_LAT(DisasContext *ctx, arg_LAT *a)
+{
+ if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
+ return true;
+ }
+
+ TCGv Rd = cpu_r[a->rd];
+ TCGv addr = gen_get_zaddr();
+ TCGv t0 = tcg_temp_new_i32();
+ TCGv t1 = tcg_temp_new_i32();
+
+ gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
+ tcg_gen_xor_tl(t1, t0, Rd);
+ tcg_gen_mov_tl(Rd, t0); /* Rd = t0 */
+ gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
+
+ tcg_temp_free_i32(t1);
+ tcg_temp_free_i32(t0);
+ tcg_temp_free_i32(addr);
+
+ return true;
+}
--
2.21.3
