Fix the mapping of the PCI regions for the realview board, which were
all incorrect. (This was never noticed because the Linux kernel
doesn't actually include a PCI driver for the realview boards.)

Signed-off-by: Peter Maydell <peter.mayd...@linaro.org>
---
 hw/arm/realview.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/hw/arm/realview.c b/hw/arm/realview.c
index ba61d18..23c968b 100644
--- a/hw/arm/realview.c
+++ b/hw/arm/realview.c
@@ -218,9 +218,9 @@ static void realview_init(QEMUMachineInitArgs *args,
         busdev = SYS_BUS_DEVICE(dev);
         qdev_init_nofail(dev);
         sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */
-        sysbus_mmio_map(busdev, 1, 0x61000000); /* PCI self-config */
-        sysbus_mmio_map(busdev, 2, 0x62000000); /* PCI config */
-        sysbus_mmio_map(busdev, 3, 0x63000000); /* PCI I/O */
+        sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */
+        sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */
+        sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */
         sysbus_connect_irq(busdev, 0, pic[48]);
         sysbus_connect_irq(busdev, 1, pic[49]);
         sysbus_connect_irq(busdev, 2, pic[50]);
@@ -304,12 +304,12 @@ static void realview_init(QEMUMachineInitArgs *args,
     /*  0x58000000 PISMO.  */
     /*  0x5c000000 PISMO.  */
     /* 0x60000000 PCI.  */
-    /* 0x61000000 PCI Self Config.  */
-    /* 0x62000000 PCI Config.  */
-    /* 0x63000000 PCI IO.  */
-    /* 0x64000000 PCI mem 0.  */
-    /* 0x68000000 PCI mem 1.  */
-    /* 0x6c000000 PCI mem 2.  */
+    /* 0x60000000 PCI Self Config.  */
+    /* 0x61000000 PCI Config.  */
+    /* 0x62000000 PCI IO.  */
+    /* 0x63000000 PCI mem 0.  */
+    /* 0x64000000 PCI mem 1.  */
+    /* 0x68000000 PCI mem 2.  */
 
     /* ??? Hack to map an additional page of ram for the secondary CPU
        startup code.  I guess this works on real hardware because the
-- 
1.7.9.5


Reply via email to