On 23 April 2012 23:21, Peter Chubb peter.ch...@nicta.com.au wrote:
Peter Are these two devices really on the same IRQ?
Yes. A single interrupt line comes from the FPGA into the AVIC.
Inside the FPGA the interrupts for the UARTs, SD card and NAND flash
are connected to that single
On 23 April 2012 23:21, Peter Chubb peter.ch...@nicta.com.au wrote:
Peter Are these two devices really on the same IRQ?
Yes. A single interrupt line comes from the FPGA into the AVIC.
Inside the FPGA the interrupts for the UARTs, SD card and NAND flash
are connected to that single interrupt
On 23 April 2012 00:31, Peter Chubb peter.ch...@nicta.com.au wrote:
Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board built
around the FreeScale i.MX31.
+ if (serial_hds[3]) {
+ serial_mm_init(address_space_mem, KZM_FPGA, 0,
+
Peter == Peter Maydell peter.mayd...@linaro.org writes:
Peter On 23 April 2012 00:31, Peter Chubb peter.ch...@nicta.com.au
Peter wrote:
Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board
built around the FreeScale i.MX31.
+ if (serial_hds[3]) {
+
Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board built
around the FreeScale i.MX31.
Signed-off-by: Philip O'Sullivan phil...@ok-labs.com
Signed-off-by: Peter Chubb peter.ch...@nicta.com.au
---
Makefile.target |2
hw/kzm.c| 161