Re: [Qemu-devel] Kqemu support in current qemu

Am 29.09.2011 um 18:57 schrieb Ottavio : > Sorry, I had forgotten to add a title > > -- Forwarded message -- > From: Ottavio > Date: 29 September 2011 17:55 > Subject: > To: qemu-devel@nongnu.org > Cc: qemu-us...@yahoogroups.com > > > I wonder if it is possible to compile a ne

[Qemu-devel] Kqemu support in current qemu

Sorry, I had forgotten to add a title -- Forwarded message -- From: Ottavio Date: 29 September 2011 17:55 Subject: To: qemu-devel@nongnu.org Cc: qemu-us...@yahoogroups.com I wonder if it is possible to compile a newer version of qemu with (the defunct) kqemu on Windows (XP)? Th

Re: [Qemu-devel] kqemu with "full" -kernel-kqemu and windows XP guest

On Sun, Oct 24, 2010 at 08:09, John Lumby wrote: >  FYI I have a developed a fairly small and (relative to > kqemu itself) simple workaround for this problem,  that allows you to get > some benefit from  -kernel-kqemu without resorting to other tricks such as > disabling ACPI in the guest device m

[Qemu-devel] kqemu with "full" -kernel-kqemu and windows XP guest

There have been a few posts over the years on problems with Win XP BSOD during boot when trying to run the windows using the "old" kqemu accelerator with the -kernel-kqemu option (accelerate guest kernel mode as well as guest user mode). This issue is probably nearly dead by now, but for

[Qemu-devel] kqemu and XP guest - lock-up at mup.sys

Hi, It would appear that kqemu somehow breaks the XP guest under some circumstances. If I install from scratch in qemu+kqemu, it works fine in kqemu, but not on bare metal. The fact it doesn't work on bare metal COULD be related to the fact that on bare metal I'm running off a USB stick (it'

[Qemu-devel] kqemu subversion

I have been maintaining a subversion repository for kqemu for the last 8-9 months due to the large amount of changes required for the Solaris port of kqemu However, due to some life issues, I'm not sure I have managed to get all the patches for kqemu into the repository. The current trunk for the

[Qemu-devel] [kqemu] gpf in memory access

I was playing with gpm (mouse daemon) in Linux guest and apparently my gpm binary is broken and with the "ps2" plugin it segfaults because of a general protection fault when trying to load a quadword from the address 0xff00. Under qemu as well as on the my physical amd64 it just segfaul

Re: [Qemu-devel] [kqemu] BR and presentation

> > > If I'm not mistaken, the 0.9.0 release had an issue with corrupting > > the qcow2 image when it was around 2GB. > > > > Why not using the newest version, 0.9.1? Tom

[Qemu-devel] kqemu working with qemu cvs?

Is there a version of kqemu that works with the cvs version of qemu? When I tried to run qemu with kqemu, it hung while booting SuSE Linux. And I'm sorry if this is the second one with this question; MDaemon seems to like to block me when I use Outlook Express.

Re: [Qemu-devel] [kqemu] BR and presentation

> > I've got some other problems, maybe this is linked : > > 1/ I installed slackware-12.0 on a vm (the same OS as hosted, may > > I consult a psychanalist ?), on qcow2 virtual disk. The > > installation and use works fine, full virtualisation enabled, and > > today, without doing nothing particu

[Qemu-devel] kqemu working with qemu cvs?

Is there a version of kqemu that works with the cvs version of qemu? When I tried to run qemu with kqemu, it hung while booting SuSE Linux.

[Qemu-devel] [kqemu] BR and presentation

Hi, I'm using qemu on a Slackware 12.0 up to date. Kernel is home made, and release is : 2.6.21.5 My processor is an AthlonXP 2500+ (so, single core and no virtualisation instructions embedded) My qemu and kqemu version are : kqemu-1.3.0pre11-i686-1ast qemu-0.9.0-i686-0ast. I build myself the pack

Re: [Qemu-devel] [kqemu patch] get Open/NetBSD to work with the kqemu accelerator

I just wanted to comment and say this patch works great. I too was having problems with getting OpenBSD 4.2 working without using the -no-kqemu option. Recompiling with this patch I was able to confirm that kqemu was working by running 'info kqemu' in the qemu monitor. I would really like to see

Re: [Qemu-devel] kqemu in x86_64: (host) exception 0x0d in monitor space

Even in a fairly new CVS snapshot this problem ist not solved, at least not on my 64bit openSUSE system. Adding -no-kqemu works, slow but when I try to install a 64bit openSUSE in qemu then GRUB hangs (at the very end end of the installation). This IMHO x86_64 bit support in Qemu is somewhat instab

[Qemu-devel] kqemu in x86_64: (host) exception 0x0d in monitor space

Hi, Is there any known fix for the issue reported previously here - http://www.mail-archive.com/qemu-devel@nongnu.org/msg06241.html I'm seeing the same issue trying to install ubuntu-7.10-server-amd64 on ubuntu-7.10-desktop-amd64 (2.6.22-14-generic #1 SMP) using the current Ubuntu distributed qem

[Qemu-devel] kqemu on celeron 64-bit (fwd)

Hi. I'm not sure this message made it to the list (I never saw it come back), so I'm re-sending it. If it actually did make it before, I apologize. Thanks. --Ryan -- Forwarded message -- Date: Sat, 17 Nov 2007 12:13:45 -0500 (EST) From: Ryan Jud Hughes <[EMAIL PROTECTED]> To:

[Qemu-devel] KQemu require Intel VT or AMD-V processors ?

Question 1) Does KQemu require Intel VT or AMD-V processors ? Question 2) Qemu runs and XP as guest is working on a Linux FC7 host. I installed kqemu from sources (kqemu-1.3.0pre11.tar.gz) and it configured/mak/make install without errors. However, when I e.g. start a VM, I still get the fol

[Qemu-devel] [kqemu patch] get Open/NetBSD to work with the kqemu accelerator

[sorry if this is the wrong list, but I haven't figured out any public address where I could send kqemu bug reports and patches] Currently, both NetBSD and OpenBSD are hanging or crashing when running on qemu with the kqemu accelerator enabled. This happens because both systems are using a weird

Re: [Qemu-devel] Kqemu on x86_64 host with x86_64 guest

On Saturday 13 October 2007 16:24, Werner Dittmann wrote: > Bruno Cornec wrote: > > On Sat, Oct 13, 2007 at 01:53:37PM +0200, Bruno Cornec wrote: > >> However, mandriva 2008.0 x86_64 doesn't exhibit this error on the same > >> host. > > > > I stand corrected. It also crashed but later during the in

Re: [Qemu-devel] Kqemu on x86_64 host with x86_64 guest

On Sat, Oct 13, 2007 at 04:24:45PM +0200, Werner Dittmann wrote: > Even when using -no-kqemu it somehow fails/hangs during setup of Grub > when I try to install a openSuse 10.2 or 10.3 . These problems are know > for quite some time - but no solution yet. Agreed, but is it only linked to qemu for

Re: [Qemu-devel] Kqemu on x86_64 host with x86_64 guest

Bruno Cornec wrote: > On Sat, Oct 13, 2007 at 01:53:37PM +0200, Bruno Cornec wrote: >> However, mandriva 2008.0 x86_64 doesn't exhibit this error on the same >> host. > > I stand corrected. It also crashed but later during the install process, > where the other were at the start. Back to -no-kqemu

Re: [Qemu-devel] Kqemu on x86_64 host with x86_64 guest

On Sat, Oct 13, 2007 at 01:53:37PM +0200, Bruno Cornec wrote: > However, mandriva 2008.0 x86_64 doesn't exhibit this error on the same > host. I stand corrected. It also crashed but later during the install process, where the other were at the start. Back to -no-kqemu. Bruno. -- Des infos sur la

Re: [Qemu-devel] Kqemu on x86_64 host with x86_64 guest

On Fri, Oct 12, 2007 at 08:04:16AM +0200, Bruno Cornec wrote: > I Can say the same of Mandriva 2007.1 as host, and SuSE 10.3,Debian 4.0, > RHEL 5 ... as guests. > > > Unsupported return value: 0x > > Exactly the same. However, mandriva 2008.0 x86_64 doesn't exhibit this error on the same

Re: [Qemu-devel] Kqemu on x86_64 host with x86_64 guest

On Thu, Oct 11, 2007 at 06:27:28PM -0700, Alexander Sennhauser wrote: > Just wanted to check if there is any progress with a x86_64 guest on a > x86_64 host when the kernel module kqemu is enabled. As long the module > is disabled the system boots fine. > > Setting: Gentoo x86_64 box as host, gues

[Qemu-devel] Kqemu on x86_64 host with x86_64 guest

Hey there, Just wanted to check if there is any progress with a x86_64 guest on a x86_64 host when the kernel module kqemu is enabled. As long the module is disabled the system boots fine. Setting: Gentoo x86_64 box as host, guest is a Debian AMD64 Execution: /usr/local/bin/qemu-system-x86_64 -k

[Qemu-devel] KQEMU build on MinGW patch

Attached patch allows KQEMU to build on pure MinGW installation without the need for ELF tools or compilation on Linux. I'm not sure if it breaks the Linux compilation, so it should be carefully tested. Hope it's usefull at least for someone. Best regards, Filip Navara kqemu-mingw.diff Descripti

Re: [Qemu-devel] KQEMU build on MinGW patch

On 9/8/07, Filip Navara <[EMAIL PROTECTED]> wrote: > Attached patch allows KQEMU to build on pure MinGW installation without the > need for ELF tools or compilation on Linux. I'm not sure if it breaks the > Linux compilation, so it should be carefully tested. Hope it's usefull at > least for someon

[Qemu-devel] KQEMU build on MinGW patch

Attached patch allows KQEMU to build on pure MinGW installation without the need for ELF tools or compilation on Linux. I'm not sure if it breaks the Linux compilation, so it should be carefully tested. Hope it's usefull at least for someone. Best regards, Filip Navara kqemu-mingw.diff Descripti

Re: [Qemu-devel] kqemu compiler error

> Hi, I am using slack11, kernel 2.6.22, after ./compile; make, I had the > errors: ... > To fix it, I included in the kqemu-linux.c file. I had the same problem, your solution worked for me too. Thanks! Hugo Segovia __ Correo Yahoo! Espacio

[Qemu-devel] kqemu compiler error

Hi, I am using slack11, kernel 2.6.22, after ./compile; make, I had the errors: CC [M] /home/serra/kqemu-1.3.0pre11/kqemu-linux.o /home/serra/kqemu-1.3.0pre11/kqemu-linux.c: In function `kqemu_lock_user_page': /home/serra/kqemu-1.3.0pre11/kqemu-linux.c:82: error: dereferencing pointer to incomp

Re: [Qemu-devel] Kqemu does not compile with kernel 2.6.22

I just built it for 2.6.22.1 with gcc 3.4.6. On 8/2/07, Hugo Adrián Segovia Cardozo <[EMAIL PROTECTED]> wrote: > Hi! > I get the newest version of kqemu (kqemu-1.3.0pre11), and it compiled fine > in various kernels up to 2.6.21. > But when I tried to compile it with 2.6.22, I get this error: > > C

[Qemu-devel] Kqemu does not compile with kernel 2.6.22

Hi! I get the newest version of kqemu (kqemu-1.3.0pre11), and it compiled fine in various kernels up to 2.6.21. But when I tried to compile it with 2.6.22, I get this error: CC [M] /home/hc/tmp/kqemu-1.3.0pre11/kqemu-linux.o /home/hc/tmp/kqemu-1.3.0pre11/kqemu-linux.c: In function 'kqemu_lock_use

[Qemu-devel] KQEMU Lockup / Box Freezes on Athlon 64 3400+

Hi all. I recently downloaded qemu and kqemu sources for the first time, and compiled them on my box for a Windows 2000 guest OS setup. Qemu works fine, no problems, but when I attempt to use KQEMU, it locks up my box and I have to power fail it to reboot. System description is as follows: Lin

[Qemu-devel] kqemu crash on amd64 with x86_64 host and guest linux OS

Hi, I'm running qemu 0.9.0 with kqemu 1.3.0~pre11 from Debian packages on AMD64 with Debian Etch for x86_64 (kernel 2.6.18). The problem that I'm having is that if my guest OS is Debian Etch for i386 it works great, but if I try to install Debian Etch for AMD64 as my guest OS it crash. When I unl

[Qemu-devel] KQEMU causing guest to crash?

Hello all. When I attempt to boot the linux image from the download section, I get as far as "Freeing unused memory" before the guest os crashes, leaving me with this in my dmesg logs: <0>PAX: suspicious general protection fault: [#4] Modules linked in: kqemu nvidia(P) CPU:0 EIP:00

[Qemu-devel] kqemu-1.3.0pre11 hangs system

Hi, I am running Debian Sid and installed its qemu (0.9.0-2) package. Debian Sid has a problem: it's kqemu package is outdated, since it depends upon its 2.6.18 kernel, which is no longer available. So I compiled/installed kqemu-1.3.0pre11 instead on Debian's 2.6.21-1-k7. That all went uneventfu

[Qemu-devel] kqemu and 2.6.22-rc3

Hi, kqemu is broken at compile time with a 2.6.22-rc3 kernel: /usr/local/src/kqemu-1.3.0pre11/kqemu-linux.c: In function ‘kqemu_lock_user_page’: /usr/local/src/kqemu-1.3.0pre11/kqemu-linux.c:81: error: dereferencing pointer to incomplete type /usr/local/src/kqemu-1.3.0pre11/kqemu-linux.c: In

[Qemu-devel] [KQEMU] [RFC] "rdtsc" usage on SMP hosts

Hi, kqemu doesn't trap the "rdtsc" instruction for performance reasons. This is mostly okay on a uniprocessor host, but on a dual core CPU there are effectively two TSCs and there's no warranty that they are in sync. On my Linux desktop there happens to be about 17 seconds difference between the

[Qemu-devel] Kqemu bug

Help me I run qemu 0.9 find a bug,My Host OS is XpSp2, Tartget OS is Xpsp2.use -kelnel-kqemu svchost - networkservice error and run IceSword.exe blue screen .but don't use -kernel-kqemu is no error.

[Qemu-devel] KQEMU docs fedora udev rules

In the KQEMU docs at section 2.2 "QEMU Accelerator Installation for Linux", references to /etc/udev/permissions.d/50-udev.permissions no longer apply to Fedora Core 4 and up, as permissions are now part of the regular rules. Instead of a line "k

Re: [Qemu-devel] KQEMU Darwin port status?

On 21 Mar 2007, at 15:39, Derek Fawcus wrote: Well, they seemed to be suggesting that the kernel importing and locking the user space memory was a bit dodgy, and that the kernel should export memory to user space. Or maybe that only really applies in the case of devices... Yes. It's p

Re: [Qemu-devel] KQEMU Darwin port status?

On Mon, Mar 19, 2007 at 10:16:13PM +, Philip Boulain wrote: > On 19 Mar 2007, at 20:23, Derek Fawcus wrote: > > There was just a discussion relating to this on the darwin-kernel > > list, > > you may wish to review the archive. > > > > (The thread starts at http://lists.apple.com/archives/Dar

Re: [Qemu-devel] KQEMU Darwin port status?

You may want to hit me with a brick :) here is a draft not thested or whatever of kqemu-darwin.cpp before I have to leave... ...just for some ideads. /note to self -open a folder in kju svn tonight, so that we don't have to spam the list to much. Mike On 20.03.2007, at 12:58, Mike Krone

Re: [Qemu-devel] KQEMU Darwin port status?

Here we go: www.kronenberg.org/qemu/qemu-devel-darwin-kqemu-20mar07.tar.bz2 - Made a new IOKit kext proj to match all the kqemu name requirements - moved kext header inside kqemu-darwin.cpp to lessen stray darwin related files - added kqemu-kernel.h to the target - added kqemu.h to the target

Re: [Qemu-devel] KQEMU Darwin port status?

Cool :) just dlded your tarball, and things work well. I'm about to add the code to the "genuine" kqemu environment. With kqemu Variables and function stubs. I hope to post back soon. Mike On 20.03.2007, at 03:18, Philip Boulain wrote: Mike Kronenberg wrote: > So any suggestions on how t

Re: [Qemu-devel] KQEMU Darwin port status?

Mike Kronenberg wrote: > So any suggestions on how to lock user pages in Darwin would be very welcome. Philip Boulain wrote: Thanks; looking at this post, I'm probably barking up the right tree Right. I've cobbled up the aformentioned prototype, and it working insofar that the modified an

Re: [Qemu-devel] KQEMU Darwin port status?

On 19 Mar 2007, at 20:23, Derek Fawcus wrote: There was just a discussion relating to this on the darwin-kernel list, you may wish to review the archive. (The thread starts at http://lists.apple.com/archives/Darwin-kernel/ 2007/Mar/msg00010.html). Thanks; looking at this post, I'm probably

Re: [Qemu-devel] KQEMU Darwin port status?

On Mon, Mar 19, 2007 at 06:54:35PM +, Philip Boulain wrote: > > Mmm, that's rather unhelpful. From my own reading, it looks like the > Apple-approved way of doing this would be to use an > IOMemoryDescriptor: initWithAddress() would initialise one which There was just a discussion relat

Re: [Qemu-devel] KQEMU Darwin port status?

On 19 Mar 2007, at 08:49, Mike Kronenberg wrote: I have made a empty kext and a dummy client to do some tests on this topics. Boundary crossing is working well, so by now the kext part is ready. http://www.kronenberg.org/files/kqemu_poc.zip Neat, thanks. Unfortunately, Apple decided to rem

Re: [Qemu-devel] KQEMU Darwin port status?

Hi there, On 17.03.2007, at 20:30, Philip Boulain wrote: Hi! I'll keep this succinct, because I'm sure they'd be FAQ-grade questions if this list had a FAQ: :) 1) Where's the version repository for KQEMU? It doesn't appear to be under/alongside QEMU itself. 2) Has anyone made any progre

[Qemu-devel] KQEMU Darwin port status?

Hi! I'll keep this succinct, because I'm sure they'd be FAQ-grade questions if this list had a FAQ: :) 1) Where's the version repository for KQEMU? It doesn't appear to be under/alongside QEMU itself. 2) Has anyone made any progress with porting KQEMU to Darwin x86? I've had a look at th

[Qemu-devel] kqemu-1.3.0pre11 installer for Windows

Hi, I made a Kqemu-1.3.0pre11 installer. http://www.h6.dion.ne.jp/~kazuw/qemu-win/Kqemu-1.3.0pre11-install.exe Please uninstall your old version before installing it. It is "KQEMU virtualization module for QEMU" in the control panel->add/remove software. The new Kqemu is installed as "QEMU Accere

[Qemu-devel] [kqemu] make clean should remove generated files

Hi, When running make clean, the following files arent removed for now : config-host.mak (generated by configure) kqemu.mod.c Module.symvers (generated both by kernel build part) Dont know for the last 2, but IMHO config-host.mak has to be removed. Kind regards, Sylvain Petreolle (aka Usurp) ---

[Qemu-devel] kqemu cvs?

Is kqemu in CVS anywhere? Extra points awarded for availability of the pre-GPL revisions. :-) -- | Soren Hansen| Linux2Go | http://Linux2Go.dk/ | | Seniorkonsulent | Lindholmsvej 42, 2. TH| +45 46 90 26 42 | | [EMAIL PROTECTED] | 9400 Norresundby, Denmark | GPG key:

[Qemu-devel] kqemu / x86_64

Hi Fabrice, I was thrilled to see in the announcement that kqemu x86_64 full virtualization was new in pre10, so I tried it. Unfortunately I didn't get far. I pointed it at my current Debian kernel and initrd, and got: kqemu: aborting: Unexpected exception 0x0d in monitor space err= CS:EIP=

[Qemu-devel] KQEMU docs: fedora udev rules

(Sending again after subscribing.) In the KQEMU docs at section 2.2 "QEMU Accelerator Installation for Linux", the references to /etc/udev/permissions.d/50-udev.permissions no longer apply to Fedora Core 4 and up, as permissions are now part of

[Qemu-devel] kqemu in vserver 2.6

Hi! I'm trying to utilize kqemu on my vserver setup. I'm using distro's qemu 0.8.2 (ALT) which has couple of patches applied (I may list them) and vanilla kqemu 1.3.0pre9. Now, after 'modprobe kqemu' I start qemu with $ qemu-system-x86_64 -kernel-kqemu -cdrom ~/src/activewebs-camelot/src/dom0/d

[Qemu-devel] kqemu for Solaris x86/x64 available

Hello all, for those that do not follow the OpenSolaris project, I would like to announce that 'kqemu' bindings are available for Solaris x86/x64 on the OpenSolaris website (http://www.opensolaris.org/os/project/qemu/) Fabrice has already gotten the changes, so hopefully you will see the kqemu-so

Re: [Qemu-devel] Kqemu issue

Alessandro Corradi wrote: Hi all, I use Debian host os with debian guest os. The problem is that I must to reinstall kqemu every time I boot my host system. When I try to load qemu it tells me that it can't open kqemu (first I load kqemu with modprobe naturallyand it is ok), I chmod 777 /dev/kq

[Qemu-devel] Kqemu issue

Hi all,I use Debian host os with debian guest os. The problem is that I must to reinstall kqemu every time I boot my host system.When I try to load qemu it tells me that it can't open kqemu (first I load kqemu with modprobe naturallyand it is ok), I chmod 777 /dev/kqemu and it tells me that there i

Re: [Qemu-devel] kqemu accelerator license

Jordan Kapelner wrote: What are the licensing terms for redistributing the kqemu accelerator? I would like to include it as part of a Linux distribution and also include the windows version of the driver to be installed with a windows application. See http://www.qemu.org/qemu-accel.html

[Qemu-devel] kqemu accelerator license

What are the licensing terms for redistributing the kqemu accelerator?  I would like to include it as part of a Linux distribution and also include the windows version of the driver to be installed with a windows application.   Regards,   Jordan Kapelner [EMAIL PROTECTED]  

[Qemu-devel] kqemu version 1.3.0pre5 build failure on 2.6.16-1.2080_FC5

Hello I tryed to build kqemu on FC5 using 2.6.16-1.2080_FC5 and it fails because map_mem is undeclared. The attached patch fixes it for me (remove to defines) but its likly to break older kernels. So a better one is needed. Anyway I decided to report it here. Patch is attached. PS: Please CC me

Re: [Qemu-devel] kqemu in x86_64: (host) exception 0x0d in monitor space

J M Cerqueira Esteves wrote: > Summary: qemu-system-x86_64 with kqemu (running under Ubuntu on a Athlon > 64) crashes while installing a guest Debian amd64 testing (etch) system, > with the host reporting (in kernel logs): > kqemu: aborting: Unexpected exception 0x0d in monitor space However, wi

Re: [Qemu-devel] kqemu in x86_64: (host) exception 0x0d in monitor space

J M Cerqueira Esteves wrote: > Summary: qemu-system-x86_64 with kqemu (running under Ubuntu on a Athlon > 64) crashes while installing a guest Debian amd64 testing (etch) system, > with the host reporting (in kernel logs): > kqemu: aborting: Unexpected exception 0x0d in monitor space I forgot

[Qemu-devel] kqemu in x86_64: (host) exception 0x0d in monitor space

Greetings Summary: qemu-system-x86_64 with kqemu (running under Ubuntu on a Athlon 64) crashes while installing a guest Debian amd64 testing (etch) system, with the host reporting (in kernel logs): kqemu: aborting: Unexpected exception 0x0d in monitor space Host CPU: AMD Athlon 64 3500+ (machi

[Qemu-devel] kqemu install problem

Hi all, i try to explain my little problem but first some information about my system: Fedora Core 5,- i386 Version qemu-0.8.1, Nvidia Graphic, Linux FC5-i386 2.6.17-1.2157_FC5 #1 Tue Jul 11 22:55:46 EDT 2006 i686 athlon i386 GNU/Linux i tried to install kqemu and it wo

[Qemu-devel] kqemu and windows 2000 disk management problem

lo list. Launching qemu with kqemu enabled produces the below traces when working with a Windows 2000 w/SP4 guest. It can be reproduced in this process: 1) Open the Computer Management dialog in the Administrative Tools 2) Select under Storage "Disk Management" 3) Select a disk in the right pa

[Qemu-devel] kqemu-1.3.0pre6 doesn't work with Win98

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, after switching from kqemu-1.3.0pre5 to kqemu-1.3.0pre6, Win98 guest stops during boot with "Windows protection fault". Qemu is started with qemu -hda win98/win98-new.img -boot c (I used the same command line successfully with old kqemu). Any i

[Qemu-devel] kqemu-1.3.0-pre6 and qemu-0.8.1

Syatme is Debian derivative, kernel version 2.6.15.1. compiled k1qemu with gcc-4.0, compiles and insmods fine compiled qemu with gcc-3.4, compiles, installs and runs fine without -kernel-kqemu option kernel panic with -kernel-kqemu option (guest slax, host linux). Is this a known issue? -ishwar

[Qemu-devel] kqemu copyright info

The module logs "QEMU Accelerator Module version 1.2.0, Copyright (c) 2005 Fabrice Bellard" while we are in 2006. Major bug ! :-) ___ Qemu-devel mailing list Qemu-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/qemu-devel

Re: [Qemu-devel] kqemu version 1.3.0pre5

Hello, I have the same issues as Christian : I'm unable to get -kernel-kqemu option to work. My configuration : Host : Windows XPpro SP2 on Intel P4HT QEMU : 0.8.0 latest CVS version. qemu.exe process' affinity set to second 'CPU' (with ImageCfg, but the result is the same if set with ProcExp o

Re: [Qemu-devel] kqemu version 1.3.0pre5

I tried various guests today on winXP host. * No crash and good speed for std kqemu (no kernel-kqemu) * Crash of winXP host systematically on all guests (linux + ms) It's hard to debug what is the problem. The only thing I have the time to see is a BSOD (blue screen of d**th) and the error messag

Re: [Qemu-devel] kqemu version 1.3.0pre5

Ed Swierk wrote: On 3/28/06, Jens Axboe <[EMAIL PROTECTED]> wrote: monitor/mwait feature present. using mwait in idle threads. [snip] invalid operand: [#1] Modules linked in: CPU:0 EIP:0060:[]Not tainted VLI EFLAGS: 00010246 (2.6.14-1.1656_FC4) EIP is at mwait_idle+0x2f/

Re: [Qemu-devel] kqemu version 1.3.0pre5

On 3/28/06, Jens Axboe <[EMAIL PROTECTED]> wrote: > > monitor/mwait feature present. > > using mwait in idle threads. > > [snip] > > > invalid operand: [#1] > > Modules linked in: > > CPU:0 > > EIP:0060:[]Not tainted VLI > > EFLAGS: 00010246 (2.6.14-1.1656_FC4) > > EIP is at mwai

Re: [Qemu-devel] kqemu version 1.3.0pre5

On Tue, Mar 28 2006, Ed Swierk wrote: > I'm still getting a kernel panic running a Linux guest kernel with > -kernel-qemu. I'm using kqemu-1.3.0pre5 and > qemu-snapshot-2006-03-27_23. > > The guest kernel is a precompiled Fedora Core 4 kernel, version > 2.6.14-1.1656_FC4. It works fine with kqemu

Re: [Qemu-devel] kqemu version 1.3.0pre5

Ed Swierk wrote: I'm still getting a kernel panic running a Linux guest kernel with -kernel-qemu. I'm using kqemu-1.3.0pre5 and qemu-snapshot-2006-03-27_23. The guest kernel is a precompiled Fedora Core 4 kernel, version 2.6.14-1.1656_FC4. It works fine with kqemu in non-kernel-kqemu mode. Any

Re: [Qemu-devel] kqemu version 1.3.0pre5

I'm still getting a kernel panic running a Linux guest kernel with -kernel-qemu. I'm using kqemu-1.3.0pre5 and qemu-snapshot-2006-03-27_23. The guest kernel is a precompiled Fedora Core 4 kernel, version 2.6.14-1.1656_FC4. It works fine with kqemu in non-kernel-kqemu mode. Any hints for how to tr

Re: [Qemu-devel] kqemu version 1.3.0pre5

On Tue, 28 Mar 2006 12:26:37 +0400, Brad Campbell <[EMAIL PROTECTED]> wrote: > Fabrice Bellard wrote: >> Hi, >> >> I just released a new version of kqemu which fixes some recently >> discovered issues. The fixes are the following: >> >> - Support for guest Linux kernels compiled with gcc >= 3.3 >

Re: [Qemu-devel] kqemu version 1.3.0pre5

Sent: Tuesday, March 28, 2006 8:50 PM Brad Campbell wrote: > Kazu wrote: > >> I tested Linux guest/WinXP host but the host OS crashed. > > I believe -kernel-kqemu is still somewhat experimental on Windows host. > >> Redhat 7.2 guest/Fedora Core 4 host with normal kqemu is slower >> than -no-kqemu

Re: [Qemu-devel] kqemu version 1.3.0pre5

On Tuesday, March 28, 2006, 14:27:48, andrzej zaborowski wrote: > Normal Operating Systems don't crash no matter what program they are running. That only applies to user-mode programs that don't make calls to device drivers. Kqemu is basically a device driver which runs in kernel space, and a cra

Re: [Qemu-devel] kqemu version 1.3.0pre5

Paul Brook wrote: Normal Operating Systems don't crash no matter what program they are running. Except that kqemu is a kernel module (or windows equivalent). As such it is effectively part of the OS, and can easily crash the whole machine. Yes indeed. I'm actually quite impressed. I've cras

Re: [Qemu-devel] kqemu version 1.3.0pre5

Works fine on my computer too! OS: Ubuntu 5.10 (Breezy Badger) CPU: Athlon XP 2000+ (with kernel 2.6.12-10-k7) Using latest CVS version of QEMU with some USB patches from http://gnome.dnsalias.net/patches/On 3/28/06, Paul Brook <[EMAIL PROTECTED]> wrote: > Normal Operating Systems don't crash no

Re: [Qemu-devel] kqemu version 1.3.0pre5

> Normal Operating Systems don't crash no matter what program they are > running. Except that kqemu is a kernel module (or windows equivalent). As such it is effectively part of the OS, and can easily crash the whole machine. Paul ___ Qemu-devel mail

Re: [Qemu-devel] kqemu version 1.3.0pre5

On 28/03/06, Marco Matthies <[EMAIL PROTECTED]> wrote: > Brad Campbell wrote: > > none 768M 137M 632M 18% /tmp <-- not sure why it > > says none.. it's tmpfs > > change the none to tmpfs in /etc/fstab. normally the mount point goes > there, but tmpfs (and proc, for example) don

Re: [Qemu-devel] kqemu version 1.3.0pre5

Brad Campbell wrote: none 768M 137M 632M 18% /tmp <-- not sure why it says none.. it's tmpfs change the none to tmpfs in /etc/fstab. normally the mount point goes there, but tmpfs (and proc, for example) don't have a mount point so you can put anything there. marco __

Re: [Qemu-devel] kqemu version 1.3.0pre5

Kazu wrote: I tested Linux guest/WinXP host but the host OS crashed. I believe -kernel-kqemu is still somewhat experimental on Windows host. Redhat 7.2 guest/Fedora Core 4 host with normal kqemu is slower than -no-kqemu. Why ? Have you got your tmpfs set up correctly so qemu can place its

Re: [Qemu-devel] kqemu version 1.3.0pre5

Sent: Tuesday, March 28, 2006 6:30 AM Fabrice Bellard wrote: > Hi, > > I just released a new version of kqemu which fixes some recently > discovered issues. The fixes are the following: > > - Support for guest Linux kernels compiled with gcc >= 3.3 > > - x86_64 host support is working again (only

Re: [Qemu-devel] kqemu version 1.3.0pre5

Fabrice Bellard wrote: Hi, I just released a new version of kqemu which fixes some recently discovered issues. The fixes are the following: - Support for guest Linux kernels compiled with gcc >= 3.3 Tested with 2.4.26 & 2.6.16 - gcc-3.2, gcc-3.3, gcc-3.4 & gcc-4.0.2 Win2k-SP3, Win2k-SP4, W

Re: [Qemu-devel] kqemu version 1.3.0pre5

On 3/27/06, Fabrice Bellard <[EMAIL PROTECTED]> wrote: > Hi, > > I just released a new version of kqemu which fixes some recently > discovered issues. The fixes are the following: > > - Support for guest Linux kernels compiled with gcc >= 3.3 Hello, I tried the Mandriva boot.iso and it now boots f

[Qemu-devel] kqemu version 1.3.0pre5

Hi, I just released a new version of kqemu which fixes some recently discovered issues. The fixes are the following: - Support for guest Linux kernels compiled with gcc >= 3.3 - x86_64 host support is working again (only i386 on x86_64 full virtualization has been tested, x86_64 on x86_64 is

Re: [Qemu-devel] kqemu runtime loading

On Wed, Nov 30, 2005 at 10:54:00PM +0100, Jerome Warnier wrote: > > No, only the .h is needed. The proprietary part is only needed if you > > want to build the module. > And the header (.h) is free? > That is my understanding. > -- > J?r?me Warnier > FLOSS Consultant > http://beeznest.net > -

Re: [Qemu-devel] kqemu runtime loading

Le mercredi 30 novembre 2005 à 20:37 +0100, Pascal Terjan a écrit : > On 11/30/05, Jérôme Warnier <[EMAIL PROTECTED]> wrote: > > Le mercredi 30 novembre 2005 à 07:36 +0100, Pascal Terjan a écrit : > > > On 11/29/05, Jim C. Brown <[EMAIL PROTECTED]> wrote: > > > > > For packaged versions of qemu (mo

Re: [Qemu-devel] kqemu runtime loading

On 11/30/05, Jérôme Warnier <[EMAIL PROTECTED]> wrote: > Le mercredi 30 novembre 2005 à 07:36 +0100, Pascal Terjan a écrit : > > On 11/29/05, Jim C. Brown <[EMAIL PROTECTED]> wrote: > > > > For packaged versions of qemu (most Linux distributions do those days), > > > > you have to rebuild it yourse

Re: [Qemu-devel] kqemu runtime loading

Le mercredi 30 novembre 2005 à 07:36 +0100, Pascal Terjan a écrit : > On 11/29/05, Jim C. Brown <[EMAIL PROTECTED]> wrote: > > > For packaged versions of qemu (most Linux distributions do those days), > > > you have to rebuild it yourself (without packaging) instead of using the > > > neat availabl

Re: [Qemu-devel] kqemu runtime loading

On 11/29/05, Jim C. Brown <[EMAIL PROTECTED]> wrote: > > For packaged versions of qemu (most Linux distributions do those days), > > you have to rebuild it yourself (without packaging) instead of using the > > neat available package. Mandriva package is built with support for both kqemu and qvm86

Re: [Qemu-devel] kqemu runtime loading

On Tue, Nov 29, 2005 at 08:06:30PM +0100, J?r?me Warnier wrote: > It would be great if kqemu could be loaded at runtime instead of > requiring qemu to be rebuild. This is more or less already the case. You can compile and distribute a kqemu enabled qemu binary w/o needing to include kqemu in the

[Qemu-devel] kqemu runtime loading

It would be great if kqemu could be loaded at runtime instead of requiring qemu to be rebuild. For packaged versions of qemu (most Linux distributions do those days), you have to rebuild it yourself (without packaging) instead of using the neat available package. Would it be hard to do? Any plans

[Qemu-devel] kqemu: Invalid module format

I compiled kqemu 0.7.2 but when I try to insmod the module I get an error: # insmod /lib/modules/2.6.11-9-amd64-k8/misc/kqemu.ko insmod: error inserting '/lib/modules/2.6.11-9-amd64-k8/misc/kqemu.ko': -1 Invalid module format Compiling the module seemed to go cleanly. Any suggestions on where I m

Re: [Qemu-devel] KQEMU

On 17/11/05, Jan Marten Simons <[EMAIL PROTECTED]> wrote: > Andreu Escudero wrote: > > >>under Linux 10. > >> > >> > > > >Someone has done a time warp of LOTS of years... from 2.6 to 10... > > > > > I suppose he is using Suse linux 10. People using this distribution > sometimes tend to think the ve

  1   2   >