BTW: the virt-manager works well on the server. I don't know how to make the
multiple NICs work using command line.
在 2015-09-29 11:19:41，"Jason Wang" 写道：
On 09/28/2015 07:52 PM, cauchy-love wrote:
> hi stefan.
>I have setup a VM on a server with two NICs (eth0 and eth1). eth0 is
> connec
BTW: Xen4.2 and later works quite well
在 2015-09-29 11:19:41，"Jason Wang" 写道：
On 09/28/2015 07:52 PM, cauchy-love wrote:
> hi stefan.
>I have setup a VM on a server with two NICs (eth0 and eth1). eth0 is
> connected with vlan22 and eth1 is connected with vlan33. I then added eth0.22
> to
Thanks for your reply. After testing, I found the network connection was
failed even without vlan. If I started up two VMs, each of which has two
VNICS(attached to br0 and br1), the network failed if br0 and br1 were on
different VLans( belong to the same NIC) or on different NICs. I am using
On 09/28/2015 07:52 PM, cauchy-love wrote:
> hi stefan.
>I have setup a VM on a server with two NICs (eth0 and eth1). eth0 is
> connected with vlan22 and eth1 is connected with vlan33. I then added eth0.22
> to br2 and eth1.33 to br3. after that tap2 and tap3 were added to br2 and
> br3
hi stefan.
I have setup a VM on a server with two NICs (eth0 and eth1). eth0 is
connected with vlan22 and eth1 is connected with vlan33. I then added eth0.22
to br2 and eth1.33 to br3. after that tap2 and tap3 were added to br2 and br3
respectively. When i start up the vm, the network conn
