I am running a VM and giving it a qcow file as its root file system.
But it is giving me following error.
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
Can any one tell me what is the kernel configuration to solve this error.
if you want full output of my system then it is as follow
---------------------------------------------------------------------------------------------
U-Boot 1.1.1 (Development build, svnversion: u-boot:Unversioned
directory, exec:Unversioned directory) (Build time: Mar 19 2014 -
18:55:26)
BIST check passed.
Warning: Board descriptor tuple not found in eeprom, using defaults
EBH5610 board revision major:1, minor:0, serial #: unknown
OCTEON CN56XX-NSP pass 2.0, Core clock: 0 MHz, DDR clock: 0 MHz (0 Mhz
data rate)
DRAM: 1024 MB
Clearing DRAM........ done
Flash boot bus region not enabled, skipping NOR flash config
ERROR: No unused memory available in flash
Net: octmgmt0
Bus 0 (CF Card): not available
USB: (port 0) No USB devices found.
Octeon ebh5610# bootoctlinux
ELF file is 64 bit
Allocating memory for ELF segment: addr: 0xffffffff84100000 (adjusted
to: 0x4100000), size 0xbbb290
Allocated memory for ELF segment: addr: 0xffffffff84100000, size 0xbbb290
Processing PHDR 0
Loading b43264 bytes at ffffffff84100000
Clearing 7802c bytes at ffffffff84c43264
## Loading Linux kernel with entry point: 0xffffffff84105b30 ...
Bootloader: Done loading app on coremask: 0xfff
Linux version 2.6.32.13-Cavium-Octeon (root@localhost.localdomain)
(gcc version 4.3.3 (Cavium Networks Version: 2_0_0 build 95) ) #20 Wed
Mar 19 18:57:46 PKT 2014
CVMSEG size: 2 cache lines (256 bytes)
Cavium Networks SDK-2.0
bootconsole [early0] enabled
CPU revision is: 000d0408 (Cavium Octeon+)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Wasting 0x10a230 bytes for tracking 19466 unused pages
Initrd not found or empty - disabling initrd
DMA32 0x00004c0a -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00004c0a -> 0x00004c50
0: 0x00004d00 -> 0x00008100
0: 0x00008200 -> 0x0000fe00
0: 0x00020000 -> 0x00040000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 172880
Kernel command line: bootoctlinux console=ttyS0,115200
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Primary instruction cache 32kB, virtually tagged, 4 way, 256 sets,
linesize 32 bytes.
Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
Memory: 691712k/704792k available (6007k kernel code, 12628k reserved,
5292k data, 280k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:408
Calibrating delay loop (skipped) preset value.. 800.00 BogoMIPS (lpj=4000000)
Security Framework initialized
Mount-cache hash table entries: 256
Checking for the daddi bug...
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource OCTEON_CVMCOUNT
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
/proc/octeon_perf: Octeon performace counter interface loaded
We are inside fixup_exception and baddr=0 and addr=0
HugeTLB registered 2 MB page size, pre-allocated 0 pages
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1351
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x1180000000c00 (irq = 59) is a OCTEON
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
CPU 0 Unable to handle kernel paging request at virtual address
00000000000001f6, epc == ffffffff843c6548, ra == ffffffff843c03e8
Oops[#1]:
Cpu 0
$ 0 : 0000000000000000 0000000000000000 00000000000001f6 ffffffff849d0000
$ 4 : 00000000000001f7 0000000000c79c00 ffffffffffffffff ffffffff84c7e208
$ 8 : 0000000000000d98 ffffffff84c80000 0000000000000000 00000000000001f7
$12 : 0000000000000000 ffffffff841059dc a80000003f83c000 0000000000000000
$16 : 00000000000088b7 a80000003e407c00 00000000000000ff ffffffff849f3db0
$20 : a80000003e407c18 0000000000000000 a80000003e419a80 000000000000000e
$24 : 0000000000000000 0000000000000000
$28 : a80000003f824000 a80000003f827c60 ffffffff84ca0000 ffffffff843c03e8
Hi : 0000000000000190
Lo : 0000000000c79c00
epc : ffffffff843c6548 ide_read_status+0x18/0x38
Not tainted
ra : ffffffff843c03e8 ide_wait_not_busy+0x40/0xa8
Status: 140088e3 KX SX UX KERNEL EXL IE
Cause : 00800408
BadVA : 00000000000001f6
PrId : 000d0408 (Cavium Octeon+)
Modules linked in:
Process swapper (pid: 1, threadinfo=a80000003f824000,
task=a80000003f821540, tls=0000000000000000)
Stack : a80000003e407c00 a80000003e407c00 ffffffff849f5cc8 ffffffff843c2cfc
a80000003e407c00 a80000003f827d60 ffffffff849f5cc8 0000000000000020
a80000003e419a80 0000000000000000 a80000003e419a80 a80000003e419a80
ffffffff84ca0000 ffffffff843c3768 a80000003e419a80 ffffffff849f5cc8
a80000003f827d58 0000000000000000 0000000000000000 00000000000003f6
ffffffff84ca0000 ffffffff84bb0000 ffffffff84b228e8 ffffffff843c3c78
00000000000001f0 00000000000001f0 0000000000000000 ffffffff849f5ca0
ffffffff849f5cb0 ffffffff84c1fadc ffffffff84b22810 a80000003f827d60
00000000000001f0 00000000000001f1 00000000000001f2 00000000000001f3
00000000000001f4 00000000000001f5 00000000000001f6 00000000000001f7
...
Call Trace:
[<ffffffff843c6548>] ide_read_status+0x18/0x38
[<ffffffff843c03e8>] ide_wait_not_busy+0x40/0xa8
[<ffffffff843c2cfc>] ide_probe_port+0x8c/0x738
[<ffffffff843c3768>] ide_host_register+0x2c0/0x790
[<ffffffff843c3c78>] ide_host_add+0x40/0xc8
[<ffffffff84c1fadc>] ide_generic_init+0x23c/0x2d8
[<ffffffff841216e0>] do_one_initcall+0x30/0x148
[<ffffffff84c0a1e8>] kernel_init+0xf0/0x160
[<ffffffff841b9010>] kernel_thread_helper+0x10/0x18
Code: dc840058 dc62ee30 0044102d <90430000> 03e00008 306200ff
00000000 dc820058 90430000
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init!
Call Trace:
[<ffffffff8411ef64>] dump_stack+0x8/0x34
[<ffffffff8411f00c>] panic+0x7c/0x16c
[<ffffffff841de090>] do_exit+0x538/0x628
[<ffffffff841bc1b8>] nmi_exception_handler+0x0/0x38
-----------------------------------------------------------------------------------------------------------
