Re: [ql-users] Adding ZX Microdrives to a QL

2003-04-02 Thread Tony Firshman
On Wed, 2 Apr 2003 at 01:57:39, wrote: (ref: <[EMAIL PROTECTED]>) > > >Oddly, given the problems that we have all experienced over the years >with QL mdvs, using cartridges in the Spectrum drives on a Spectrum are >very reliable, formatting to around 90Kb. I have hardly ever >experienced the

Re: [ql-users] Adding ZX Microdrives to a QL

2003-04-01 Thread peter . tillier
Tony Firshman wrote: > On Sun, 30 Mar 2003 at 09:17:48, wrote: > (ref: <[EMAIL PROTECTED]>) > >>Here's a little oddity... >> >>I have got 3 ZX microdrives which supposedly work with the Spectrum >>(and Interface 1). However, I have tested them by adding them to the >>QL's microdrive expansion po

Re: [ql-users] Adding ZX Microdrives to a QL

2003-03-30 Thread Tony Firshman
On Sun, 30 Mar 2003 at 09:17:48, wrote: (ref: <[EMAIL PROTECTED]>) >Here's a little oddity... > >I have got 3 ZX microdrives which supposedly work with the Spectrum >(and Interface 1).  However, I have tested them by adding them to the >QL's microdrive expansion port and using FORMAT ram1_mdv3

Re: [ql-users] Adding ZX Microdrives to a QL

2003-03-30 Thread Malcolm Cadman
In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] writes >Here's a little oddity... > >I have got 3 ZX microdrives which supposedly work with the Spectrum (and >Interface 1). However, I have tested them by adding them to the QL's >microdrive expansion port and using FORMAT ram1_mdv3 (thanks Mir

Re: [ql-users] Adding ZX Microdrives to a QL

2003-03-30 Thread Dilwyn Jones
I seem to recall the following information from many years ago: 1) cabling has to be reversed, i.e. using standard leads, the microdrives end up facing away from you. (you probably knew this already if you've actually got 2 of them working) 2) there is a slight speed difference between QL and ZX

Re: [ql-users] Adding ZX Microdrives to a QL

2003-03-30 Thread Phil Kett
On Sun, 2003-03-30 at 14:17, [EMAIL PROTECTED] wrote: > Hmm - is there a loss of signal when using more than one add-on ZX Microdrive > ?? I seem to recall that these units were not up to the same standard as the > built -in QL microdrives - am I correct?? I'm sure that I've used two ZX microd

[ql-users] Adding ZX Microdrives to a QL

2003-03-30 Thread RWAPSoftware
Here's a little oddity... I have got 3 ZX microdrives which supposedly work with the Spectrum (and Interface 1).  However, I have tested them by adding them to the QL's microdrive expansion port and using FORMAT ram1_mdv3 (thanks Miracle) with the following results: 1) All 3 plugged in together,