In a message dated 19/11/03 08:05:16 GMT Standard Time, [EMAIL PROTECTED] writes:
Is there on the web any disassembler available free worth a recommendation ?(I mean a 680xx disassembler... might be ok if it run either on a Q40 ora PC)
The disassembler GWDISS is available from the SQLUG
On 19 Nov 2003 at 12:53, Jerome Grimbert wrote:
(...)
I will think of that (but it's basically a 3.01, excepted for a minor personal
correction about mode8 mask convertion, totally irrelevant I believe for the booting
problem).
And the strangest part is: when lrespr-ed, it works fine!
Only
Greeting,
Is there on the web any disassembler available free worth a recommendation ?
(I mean a 680xx disassembler... might be ok if it run either on a Q40 or
a PC)
I'm going to reverse the Q40 2.91 eprom code to try to understand what's wrong with my
home-made new 3.01 eprom... unless
DEA intelligent disassembler can be freely downloaded from my web site
www.geocities.com/dsantachiara
Regards
Davide
Is there on the web any disassembler available free worth a recommendation ?
(I mean a 680xx disassembler... might be ok if it run either on a Q40 or
a PC)
On 19 Nov 2003 at 9:02, Jerome Grimbert wrote:
Greeting,
Is there on the web any disassembler available free worth a recommendation ?
(I mean a 680xx disassembler... might be ok if it run either on a Q40 or
a PC)
DISA is pretty good, even though not free. I don't know whether it is
[EMAIL PROTECTED] makes some magical things to make me read
}
} I'm going to reverse the Q40 2.91 eprom code to try to understand what's wrong
with my home-made new 3.01 eprom... unless someone came with a working solution,
} that is. Something must be different... somewhere!
} Sned it to me,
Jerome Grimbert wrote:
May be I could use the parallel-printer port to print (have to look how
to send a caractere to that interface... hopefully it's simple.
That should be pretty simple, yes.
Or using a serial port (if I connect a serial printer to it).
If you leave out all handshaking
Marcel Kilgus makes some magical things to make me read
} Jerome Grimbert wrote:
} May be I could use the parallel-printer port to print (have to look how
} to send a caractere to that interface... hopefully it's simple.
}
} That should be pretty simple, yes.
}
} But I'm afraid I'm not going