Re: [Quantum Owners] Welding & GAs

2013-10-21 Thread fixit-world
Thats a good tip Jim. Any attempt to do long welds distorts thin metal. I have just found using .6mm helps to avoid blowing holes in thin metal. Learning to weld can be frustrating but satisfying when it comes together. Ken - Reply message - From: "Jim Hearne" To: Subject: [Quantum Own

Re: [Quantum Owners] Welding & GAs

2013-10-21 Thread Don Shackley
Sent from my iPhone On 22 Oct 2013, at 06:39, fixit-wo...@hotmail.co.uk wrote: > Glad you are running now. The prices are about norm. Air Products now do a > bottle which you > Buy for about 130 pounds as i remember and get refilled. Much better than BOC > as no rental! Much depends on loca

Re: [Quantum Owners] Welding & GAs

2013-10-21 Thread fixit-world
Glad you are running now. The prices are about norm. Air Products now do a bottle which you Buy for about 130 pounds as i remember and get refilled. Much better than BOC as no rental! Much depends on location, more in north than south. Standard bottles require a large regulator but the Air Produc

[Quantum Owners] Re: Xtreme rear fog wiring

2013-10-21 Thread Andrew
Hi Mark, Had the same issue -I was using a H reg donor. I resolved it with the addition of a relay (might have been two) for the fog lights powered by the headlights. Its a simple fix, but awkward due to the access and space. I also recall an issue with the switch colour which is worth a c

Re: [Quantum Owners] Welding & GAs

2013-10-21 Thread Derek Clews
Thanks Ken, I am not sure why, but on the web there have been notes of the same behaviour, it seemed to be impossible and then difficult to get gas to flow. Now its fine and controllable. Why? - I am not sure, maybe just a new valve with some plastic dust in the system? Tried different bottl

Re: [Quantum Owners] Welding & GAs

2013-10-21 Thread Jim Hearne
I have to say i use 0.8mm wire for everything. Something shown to me by a car body repairer was not to try and do continuous welds on thin sheet (car body thickness), instead do a single quick weld without moving the torch, then release the trigger, move the torch half the weld dia and then do

RE: [Quantum Owners] Welding & GAs

2013-10-21 Thread Ken Needham
hi Derek, I've used the 160 version for some years with small bottles and large. I found with the small bottle and regulator that screws on top of the bottle, if you power off the unit with gas connected, when you press the trigger you can hear the gas hiss at the nozzel as you turn up the regu