Yes, It was the ‘almost’ fit of an alternative that made me opt for full solid
roof. Even the major makes do not give long term support/warranty to the
sunroof models. The car body is bound to outlive the sunroof (again). Fine
for your average car as it is throw away. When you buy a Quantum
My second saloon also has one of those pesky sunroofs, and sure enough it leaks
like a seive. With the car currently SORNed, I'm using a piece of old paddling
pool to keep the water out.
I didn't much like the idea of glassing it up solid, so I started looking for
an alternative.
Turns out a
sunroof in my Rickman Ranger doesn’t leak, but it isn’t opened very often,
and is probably sealed by green moss? 😊
Martin Scott
Sent from Mail for Windows 10
From: John R
Sent: 01 October 2019 11:09
To: Quantum Owners Group
Subject: Re: [Quantum Owners] Saloon sunroof
MarcoThanks for info guys
@derek
If I put a panel in it will be the solid grp one. Fixed glass might be a
bit hot on sunny days - not that we get that many ;-)
John
--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to quantum
I did wonder about having a fixed glass panel permanently set in the roof
instead. But Eddie (rightly) persuaded me it would be more work and cost to
install than restore the roof to solid. But if you want a challenge, give it a
go. it would be unique.
Cheers
Derek
> On 1 Oct 2019, at
MarcoThanks for info guys.
I have not dismantled my sunroof yet (large original type) but it is
obvious there have been previous attempts to fix/seal it .
I am more inclined to blank it off than try and fix seals. In my experience
sunroofs are often more trouble than they're worth.
Many years a
Both of our family coupe’s have had Eddie fit the full GRP roof after faulty
sunroof problems. We both left the roof solid but you could cut a different
sunroof in, if you want. It works well and, if I want open air motoring I have
the 2+2 to drive. (Why you need at least 2 Quantums, part 2………
Hi
We have the mould for the roof section here at QSC and will be happy to
supply a blank or we can supply and fit for you
regards rob (QSC)
On Tue, Oct 1, 2019 at 7:58 AM John R
wrote:
>
> Has anyone removed the sunroof and fitted a blanking panel?
>
> I read somewhere on forums that at one tim
We are trying to find the supplier in Germany who can supply the seals for
the large Electric sunroof
Paul Farrer managed a few years ago to locate the seals he his searching
for a number for me
Rob Hancock QSC I think has the blanking template for the saloon if you'd
like to make contact with him.
Does anyone know which company makes the tilt and remove sunroof for the saloon?
Eddie said he did know and was gonna source a new one for me but then he went
to hostiple.
I don’t really want to bug him about it until he’s up and about again. (Unless
he’s reading this and is getting bored at ho
10 matches
Mail list logo
