Erik Iverson-3 wrote:
On 09/22/2010 07:24 PM, sisxy wrote:
R will search in its working directory for Q.csv.
What is the working directory, use getwd() to
find out.
Thanks , by using the getwd() , i found the place that i should save in my
laptop... then after i saved in the
Dear colleagues,
I have another question, which, I think cannot be answered easily by the
manual. What is the effect of including both nodefactor(Gender) and
nodematch(Gender,diff=TRUE)) for the same variable in the model? Judging from
the output (please see below), you cant have estimates
Hello Kyran,
Some more details of your data would be helpful. For example, is it
cumulative species count over time ?
Michael
On 23 September 2010 15:05, Kyran Staunton staunto...@gmail.com wrote:
Hi,
I am trying to fit a logarithmic trendline to a scatterplot of a
species accumulation
Dear list,
I'm using lattice::levelplot to plot a coloured image of 3D data. The
range of the z values goes from negative to positive, but is not
exactly centred around 0. I would however like to map a diverging
colour scale with white falling exactly at 0, and both extremes being
symmetrical in
Dear All,
I need to create eps file which is the required figure format of the
journal that I want to submit a paper. I am able to create files in pdf or
wmf format but not in eps format. Is there a way to convert pdf or wmf to
eps? or alternatively, how can I create an eps file in R?
Any help
OK, assuming a trend in estimated spp richness vs log(effort) you
could do this...
plot(effort, richness)
rich.lm - lm( richness ~ log(effort) )
smooth.effort - seq(1, 10, 0.1) # or whatever is appropriate
lines( smooth.effort, predict(rich.lm,
newdata=list(effort=smooth.effort)), col=red )
Is
The postscript function ?
On 23 September 2010 17:12, Seyit Ali KAYIS ska...@selcuk.edu.tr wrote:
Dear All,
I need to create eps file which is the required figure format of the
journal that I want to submit a paper. I am able to create files in pdf or
wmf format but not in eps format. Is
Dear R-users
Idea:
Plot a dnorm line using specific mean/sd to complete a histogram (skewed).
xs:range of y-values, ys: dnorm function
Problem:
I expected to multiply the ys function with the sample size (n=250-300). I was
wondering about a factor between 12'000 and 30'000 to match the size of
From: Seyit Ali KAYIS ska...@selcuk.edu.tr
To: r-help@r-project.org
Sent: Thu, September 23, 2010 12:12:49 AM
Subject: [R] Help me pls
Dear All,
I need to create eps file which is the required figure format of the
journal that I want to submit a paper. I am able to create files in
On 09/23/2010 05:42 PM, Sibylle Stöckli wrote:
Dear R-users
Idea:
Plot a dnorm line using specific mean/sd to complete a histogram (skewed).
xs:range of y-values, ys: dnorm function
Problem:
I expected to multiply the ys function with the sample size (n=250-300). I was
wondering about a
On Thu, Sep 23, 2010 at 12:33 PM, baptiste auguie
baptiste.aug...@googlemail.com wrote:
Dear list,
I'm using lattice::levelplot to plot a coloured image of 3D data. The
range of the z values goes from negative to positive, but is not
exactly centred around 0. I would however like to map a
Great, I don't know how I missed that, thanks!
baptiste
On Sep 23, 2010, at 10:39 AM, Deepayan Sarkar wrote:
On Thu, Sep 23, 2010 at 12:33 PM, baptiste auguie
baptiste.aug...@googlemail.com wrote:
Dear list,
I'm using lattice::levelplot to plot a coloured image of 3D data. The
range of
Hi Kyran,
Please reply via the list - you'll get more answers that way :)
My example had the data in vectors, you are using a data.frame. Try
replacing the relevant bits of your code (below) with these lines and
see if that helps...
rich.lm ~ lm(Chao1 ~ log(N.obs), data=table1)
smooth.effort -
Dear All,
I need to create eps file which is the required figure format of the journal
that I want to submit a paper. I am able to create files in pdf or wmf format
but not in eps format. Is there a way to convert pdf or wmf to eps? or
alternatively, how can I create an eps file in R?
Thank you very much, this solve the problem, but more generally is there a
function that allow to apply a function to a list of object, applying
recursively the function to each answer...
mathematically for a 2 argument function f(u,v) you would like a function g
doing
g(u1,u2,u3,u4,u5)
I am trying to set u a limit for my plot window according to the range of a
year column I have.
The first year in the range is just simply the first row, referred to as
data$year[1]. How can I find the last row in a similar way to set the last
year in the range?
What I want to accomplish is the
You could do data$year[ nrow(data) ]
On 23 September 2010 18:56, fugelpitch jo...@runtimerecords.net wrote:
I am trying to set u a limit for my plot window according to the range of a
year column I have.
The first year in the range is just simply the first row, referred to as
data$year[1].
Thanks, but I have multiple entries for each year so the column reads:
year
1877
1877
1877
1877
1878
1878
1878
1878
1879
1879
1879
1879
So I need to pick out the year from the last row rather than just counting
rows.
--
View this message in context:
Dear List,
I fitted a bivariate extreme value distribution to my matrix (data). Now
I would like to add ‘quantile curves’ to the plot, similar to
those calculated with
qcbvnonpar()
But I need the
probability of the upper right corner instead of the lower left corner.
(So that the
On Thu, Sep 23, 2010 at 8:05 AM, KAYIS Seyit Ali s_a_ka...@yahoo.com wrote:
I need to create eps file which is the required figure format
of the journal that I want to submit a paper. I am able to
create files in pdf or wmf format but not in eps format. Is
there a way to convert pdf or wmf to
Another option for doing opertions by grouping variables is to the the
plyr package.
d - data.frame(x=1:10,
g1=LETTERS[rep(11:12,each=5)],
g2=letters[rep(21:23,c(3,3,4))]
)
library(plyr)
ddply(d, c(g1, g2), function(z){
z$x - z$x / max(z$x)
z
})
Sorry, but now I understand what you're doing, and it works as a stand-alone
in the console! :)
But why doesn't it work in the xlim?
__
pheno.dt$year[1]
[1] 1877
pheno.dt$year[nrow(pheno.dt)]
[1] 1916
plot(x,y,
OK, got it to work now, just messed up the ,' and :. Thank you!
--
View this message in context:
http://r.789695.n4.nabble.com/referencing-last-row-in-a-column-tp2551645p2551721.html
Sent from the R help mailing list archive at Nabble.com.
__
On Sep 23, 2010, at 11:44 , fugelpitch wrote:
Sorry, but now I understand what you're doing, and it works as a stand-alone
in the console! :)
But why doesn't it work in the xlim?
You have a colon where a comma would work.
BTW: Wouldn't xlim=range(pheno.dt$year) be more expedient?
Hi,
xlim and ylim should be given the extremes only:
plot(x,y, xlim=c(pheno.dt$year[1],pheno.dt$year[nrow(pheno.dt)]),
ylim=c(50,150), xlab=Year, ylab=Julian Day)
^^ ^^
Does it work now?
Ivan
Le 9/23/2010 11:44,
Yes, thanks! :)
2010-09-23 11:55, Ivan Calandra skrev:
Hi,
xlim and ylim should be given the extremes only:
plot(x,y, xlim=c(pheno.dt$year[1],pheno.dt$year[nrow(pheno.dt)]),
ylim=c(50,150), xlab=Year, ylab=Julian Day)
^^
Hi:
Look at the examples in ?Reduce
HTH,
Dennis
On Thu, Sep 23, 2010 at 12:31 AM, statquant2 statqu...@gmail.com wrote:
Thank you very much, this solve the problem, but more generally is there a
function that allow to apply a function to a list of object, applying
recursively the function
depmixS4 has reached some form of maturity and therefore we have bumped its
version number to 1.0-0 which is now on CRAN:
http://cran.r-project.org/web/packages/depmixS4/index.html
depmixS4 fits hidden (latent) Markov models of multivariate, mixed
categorical and continuous data, otherwise known
On Tue, 21-Sep-2010 at 12:55PM -0500, Vojtěch Zeisek wrote:
[...]
| Well, if You think the niche is filled, never mind, but I think R
| should have an official web forum. It can be stackoverflow (then
| I'd expect links from main R pages to it) or I (or someone else)
| can create it. Still, I
Dear Patrick,
You can fit such a model with the MCMCglmm package. Have a look at the vignette
of that package.
install.packages(MCMCglmm)
vignette(CourseNotes, package = MCMCglmm)
But I'm affraid that this will require some rockclimbing upon the learning
curve if you are a R novice.
HTH,
darckeen darckeen at hotmail.com writes:
Are there any packages that do non-linear integer otimization? Looked at
lpSolve but i'm pretty sure it only works with linear programming and not
non-linear, tried L-BFGS-B optim after flooring all my params, works
somewhat but seems really
Siterer Yihui Xie x...@yihui.name:
lists are easier to post messages, but I really believe they have too
many disadvantages, e.g. (relatively) difficult to search, dull
interface, HTML not welcome (I don't like HTML in emails, though), no
lively images, no code highlighting, attachments often
That's golden Henrique, thanks a lot! Worked like a charm even with large
datasets.
On Tue, Sep 21, 2010 at 2:56 PM, Henrique Dallazuanna www...@gmail.comwrote:
Try this:
d - data.frame(A = letters[1:10], B = sample(letters[11:20]), C =
sample(10))
xtabs(C ~ A + B, d)
On Tue, Sep 21, 2010
Dear All,
I have data in HDF file format and would like to read it into R.
I have tried the package hdf5 without success.
Any ideas and suggestions??
Kind regards,
Katrin
--
Katrin Fleischer
Vrije Universiteit Amsterdam
Faculty of Earth and Life Sciences
Subdepartment Hydrolgy and
New to R. I am trying to create a simple xy plot wherein the line
segment color is determined by a categorical column
The following does not change colors for me, probably because I don't
quite have a handle on either functions or value mapping syntax.
--
time - c(1, 2, 3,
Hi
the other option to get last item is
tail(pheno.dt$year,1)
Regards
Petr
r-help-boun...@r-project.org napsal dne 23.09.2010 12:02:35:
Yes, thanks! :)
2010-09-23 11:55, Ivan Calandra skrev:
Hi,
xlim and ylim should be given the extremes only:
plot(x,y,
Greetings
I need to merge two data sets. The first data set contains information
on individual organisms roosting in clusters,e.g., cluster one has 5
individuals: 3 females, two males, and one juvenile and so on for hundreds
of clusters. The second data set contains temperature data on each
Hi
I am not sure but you probably need to use segments.
?segments
AFAIK for line there is only one colour for whole line possible.
and in your function statusColor you shall not use if but ifelse or better
statusColor - function (x) {
c(green,orange,pink,red)[x+1]
}
based on fact that x
Hi
?merge
see all.x, all.y parameters
Regards
Petr
r-help-boun...@r-project.org napsal dne 23.09.2010 13:59:18:
Greetings
I need to merge two data sets. The first data set contains
information
on individual organisms roosting in clusters,e.g., cluster one has 5
individuals: 3
Something like this ?
time - c(1, 2, 3, 7,10,11,14,16,20)
pressure - c(0,10,20,20,50,18,60,65,90)
status - c(0, 0, 1, 1, 1, 0, 3, 3, 3)
statusColor - c(green, orange, pink, red)
plot(time, pressure)
for (i in 2:length(time)) lines(time[(i-1):i], pressure[(i-1):i],
Hi there,
I ran into a weird problem using the np-package doing some local linear
kernel regression. Whenever I run the function npregbw(...) with the
option regtype=ll (local linear modelling), my optimal bandwidth is
supposed to be 1278946. This is kind of funny, because my regressor data
(189
Hi:
time - c(1, 2, 3, 7,10,11,14,16,20)
pressure - c(0,10,20,20,50,18,60,65,90)
status - c(0, 0, 1, 1, 1, 0, 3, 3, 3)
# You want to combine the vectors into a data frame instead
# of concatenating them into one long vector.
df - data.frame(time, pressure, status)
df
time pressure status
On 09/23/2010 09:38 PM, Richard DeVenezia wrote:
New to R. I am trying to create a simple xy plot wherein the line
segment color is determined by a categorical column
The following does not change colors for me, probably because I don't
quite have a handle on either functions or value mapping
I am trying to create a NetCDF file with bathymetry (a matrix) and then to
add a grid type (an integer) as variables.
This is the relevant part of the code:
library(ncdf)
wfile=my_file.nc
msv=-10
grdtp=2
# Dimensions
d1=dim.def.ncdf(lon,degrees,as.double(lon))
I've run into a problem with a fitting procedure I would like R to solve for
me. Basically I have to fit some data to an equation which includes a sum
within the formula e.g.
Y(x;a,b,c) = f_i(x;a,b,c_i) + m*x
where a,b are unknown and f_i(x) is the sum of another function over a known
interval
thank you, achim. I will try chol2inv.
sandwich is a very nice package, but let me make some short
suggestions. I am not a good econometrician, so I do not know what
prewhitening is, and the vignette did not explain it. ?coeftest did
not work after I loaded the library. automatic bandwidth
This code worked fine for me, then did some cleaning up of formatting using ESS
(Emacs) and now I get this error, no idea what is causing it, all the
brackets/parentheses seem to be balanced. What have I done wrong?
Thanks
Jim
p0.trial01 - 0.25
TruOR01 - 0.80
num.patients.01 - 50
Dear All,
I want to upload data in HDF-file format into R. I have tried the
package 'hdf5' without success. I presume that my files are in the hdf4
format and therefore are not readable with this package. I understand
that its possible to convert hdf4 into hdf5 format using C, but I was
Peter Dalgaard pdalgd at gmail.com writes:
Then I tried:
pdf()
Error in pdf() : unable to start device pdf
In addition: Warning message:
In pdf() : cannot open 'pdf' file argument 'Rplots.pdf'
And your working directory is writable for you? Otherwise, Change dir
from the File
hi guys
i have multiple data frames which i want to merge.
there are four of them..eg
pdf
SampleID UVDose_J RepairHours Day_0 Day_45 Day_90
1SDM001 1.0 3 485.612 465.142 490.873
2SDM001 1.0 3 503.658 457.863 487.783
3SDM001 1.0 2
On Thu, 23 Sep 2010, ivo welch wrote:
thank you, achim. I will try chol2inv.
sandwich is a very nice package, but let me make some short
suggestions. I am not a good econometrician, so I do not know what
prewhitening is,
In general it means, that you do not look at a (typically
Hi group,
I am currently plotting two densities using the following code:
x1 - c(1,2,1,3,5,6,6,7,7,8)
x2 - c(1,2,1,3,5,6,5,7)
plot(density(x1, na.rm = TRUE))
polygon(density(x2, na.rm = TRUE), border=blue)
However, I would like to avoid bordering the second density as it adds
a nasty bottom
On Sep 23, 2010, at 14:54 , Maas James Dr (MED) wrote:
This code worked fine for me, then did some cleaning up of formatting using
ESS (Emacs) and now I get this error, no idea what is causing it, all the
brackets/parentheses seem to be balanced. What have I done wrong?
Look for ) ( --
On 23/09/2010 8:54 AM, Maas James Dr (MED) wrote:
This code worked fine for me, then did some cleaning up of formatting using ESS
(Emacs) and now I get this error, no idea what is causing it, all the
brackets/parentheses seem to be balanced. What have I done wrong?
It would help a lot if
Hi
r-help-boun...@r-project.org napsal dne 23.09.2010 15:10:04:
Hi group,
I am currently plotting two densities using the following code:
x1 - c(1,2,1,3,5,6,6,7,7,8)
x2 - c(1,2,1,3,5,6,5,7)
plot(density(x1, na.rm = TRUE))
polygon(density(x2, na.rm = TRUE), border=blue)
However, I
On Sep 22, 2010, at 8:15 PM, Krambrink, Amy M wrote:
Hello,
I'm using plot.survfit to plot cumulative incidence of an event.
Essentially, my code boils down to:
cox -coxph(Surv(EVINF,STATUS) ~ strata(TREAT) + covariates, data=dat)
surv - survfit(cox)
plot(surv,mark.time=F,fun=event)
Hi:
Evidently I misunderstood your intention, so let's try again. I tried to
find a lattice solution but came up empty. I think this works instead using
base graphics. The idea is to build up vectors of start points (x0, y0),
endpoints (x1, y1) and the color of the segment between each pair of
You need to take into account the bin width as well (hence the extra multiple
you asked about), but it is simpler to just include prob=TRUE in the hist call,
then you do not need to do any adjustment on the y-values of the reference
distribution.
--
Gregory (Greg) L. Snow Ph.D.
Statistical
In your call to polygon(), include lty=dashed or dotted or whatever you
want your line type to look like.
take a good look at all the options in
?par
For everything you can customize in plots. Alternatively, Paul Murrel's R
Graphics book is the best reference I know for this sort of stuff.
This is an example of the type of problem, and how i'm currently using
optim() to solve it.
mydata - runif(500,-1,1)
myfunc - function(p,d)
{
print(p - floor(p))
ws - function(i,n,x) sum(x[i-n+1]:x[i])
ws1 - c(rep(NA,p[1]-1),sapply(p[1]:NROW(d),ws,p[1],d))
ws2 -
Hi,
On Thu, Sep 23, 2010 at 9:04 AM, rasanpreet rasanpreet.k...@gmail.com wrote:
hi guys
i have multiple data frames which i want to merge.
there are four of them..eg
Can you provide a (correct) example of what you want your merged
data.frame to look like?
What column do you want to use in
Hello
I would like to pass a model formula as an argument to the with.mids
function from the mice package. The with.mids functon fits models to
multiply imputed data sets.
Here's a simple example
library(mice)
#Create multiple imputations on the nhanes data contained in the mice
package.
Hi,
On Thu, Sep 23, 2010 at 7:13 AM, Katrin Fleischer
katrin.fleisc...@falw.vu.nl wrote:
Dear All,
I have data in HDF file format and would like to read it into R.
I have tried the package hdf5 without success.
What type of errors are you getting?
Any ideas and suggestions??
Sure, from:
Hi Pele,
On Wed, Sep 22, 2010 at 12:40 PM, Pele drdi...@yahoo.com wrote:
Hi David - thanks for your suggestion, but I am trying to avoid doing any
merging and sorting for this step because the real file I will be working
with has about 20 million records. If I can get this loop or something
First, you might want to start by generating a new column to identify your
'pdf and bdf or whatever once it's merged.
For the merging, see
?merge
But as someone's already pointed out, it's not clear what you are trying to
merge by.
Also, as your example calculations show, you don't need to
Hi Katrin,
(don't forget to reply-all to R-help messages -- by default they are
only sent to the recipient, and not back to the list).
On Thu, Sep 23, 2010 at 10:03 AM, Katrin Fleischer
katrin.fleisc...@falw.vu.nl wrote:
The error message is
Error in hdf5load(Jan2006.HDF) : unable to open HDF
Hi,
this following code:
x-c(1,2,NA)
length(x)
returns 3, correctly counting numbers as well as NA's. How can I
exclude NA's from this count?
Ralf
__
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
PLEASE do read the
How do I construct a figure showing predicted value plots for the dependent
variable as a function of each explanatory variable (separately) using the
results of a logistic regression? It would also be helpful to know how to show
uncertainty in the prediction (95% CI or SE).
Thanks-
This
Hi Pele,
I think this should work
file1$state.sum - rowSums(file2[file1$state,6:10],0)
On Thu, Sep 23, 2010 at 7:46 PM, Steve Lianoglou
mailinglist.honey...@gmail.com wrote:
Hi Pele,
On Wed, Sep 22, 2010 at 12:40 PM, Pele drdi...@yahoo.com wrote:
Hi David - thanks for your suggestion,
try this
sum(!is.na(x))
I hope it helps.
Best,
Dimitris
On 9/23/2010 5:08 PM, Ralf B wrote:
Hi,
this following code:
x-c(1,2,NA)
length(x)
returns 3, correctly counting numbers as well as NA's. How can I
exclude NA's from this count?
Ralf
__
this following code:
x-c(1,2,NA)
length(x)
returns 3, correctly counting numbers as well as NA's. How can I
exclude NA's from this count?
sum(!is.na(x))
Peter
__
R-help@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/r-help
Hi Ralf,
The usual way (as others have shown you), takes advantage of the fact
that the logical values TRUE and FALSE are counted as 1 and 0,
respectively. is.na() returns TRUE if the value is NA, so to find how
many are not NA, the result is reversed using ' ! '. Similar logic
can be used to
Hi:
Try ?termplot.
HTH,
Dennis
On Thu, Sep 23, 2010 at 8:08 AM, Jay Vaughan j...@fishsciences.net wrote:
How do I construct a figure showing predicted value plots for the dependent
variable as a function of each explanatory variable (separately) using the
results of a logistic regression?
-Original Message-
From: r-help-boun...@r-project.org [mailto:r-help-boun...@r-
project.org] On Behalf Of Joshua Wiley
Sent: Thursday, September 23, 2010 8:23 AM
To: Ralf B
Cc: r-help Mailing List
Subject: Re: [R] Length of vector without NA's
Hi Ralf,
The usual way (as others
Are you aware that you can pass the function, itself, as an argument
(R is mostly a functional programming language where language objects
are first class objects).
e.g
g - function(x,fun)fun(x)
g(2,function(x)x^2)
[1] 4
On Wed, Sep 22, 2010 at 4:06 PM, Jonathan Greenberg
On 23-Sep-10 15:08:06, Jay Vaughan wrote:
How do I construct a figure showing predicted value plots for the
dependent variable as a function of each explanatory variable
(separately) using the results of a logistic regression? It would also
be helpful to know how to show uncertainty in the
??? Use lm's data argument to do this, not the with() construction:
x - 1:10
y - 2*x+5 +rnorm(10)
form - formula(y~x)
class(form)
[1] formula
lm(form)
Call:
lm(formula = form)
Coefficients:
(Intercept)x
5.7471.921
dat - data.frame(x=x,y=y)
rm(x,y)
Hello, I am using survey data with two stage sampling for two sub-populations.
I am looking for a package (or packages) that can do the following for a
measure of weight. The sub-populations are M (male) and F (female).
(1) empirical df and cdf for weight, and compare that across two sub-
Dear list,
I would like to create a time series plot in which the paths of several
individuals are stacked above each other, with the x-axis being the total
observation period of three years ( 1.1.2004 to 31.12.2007) and the y-axis
being some defined range[min,max].
My data consist of
Sorry for posting this questions twice, but my previous question was
accidentally sent unfinished.
Dear list,
I would like to create a time series plot in which the paths of several
individuals are stacked above each other, with the x-axis being the total
observation period of three years (
hi guys..thx for help
i have to perform a calculation
P-B/T-B
where P is the values in pdf and B is the values in bdf and T in tdf
On Thu, Sep 23, 2010 at 7:49 PM, Mike Rennie mikerenni...@gmail.com wrote:
First, you might want to start by generating a new column to identify your
'pdf and bdf
I wonder what the best way is to access those values. I am using the
following code:
x1 - c(1,2,1,3,5,6,6,7,7,8)
x2 - c(1,2,1,3,5,6,5,3,8,7)
d1 - density(x1, na.rm = TRUE)
d2 - density(x2, na.rm = TRUE)
plot(d1, lwd=3, main=bla)
lines(d2, lty=2, lwd=3)
d1[1]
d1[2]
The last two lines allow me to
Hi, guys,
I'm using kernel density estimation. But how can I return to a density
estimation for a fixed point?
For example,
b-runif(1000,0,1)
f-density(b)
How can I get the value of density(b) at b=0.5?
Your help is extremely appreciated. Thanks.
Jay
--
View this message in context:
By range on the y-axis, do you mean distance? It would have to be if time is
on your x? Or am I misreading this?
You could just plot() with the data for your first individual, and then add
additional individuals after that using lines(), specifying a different
colour and/or line type for each
On 23/09/2010 11:42 AM, wangguojie2006 wrote:
b-runif(1000,0,1)
f-density(b)
f is a list of things, including x values where the density is computed,
and y values for the density there. So you could do it by linear
interpolation using approx or approxfun. For example
b -
Please consider this matrix:
x - structure(c(5, 4, 3, 2, 1, 6, 3, 2, 1, 0, 3, 2, 1, 0, 0, 2, 1,
1, 0, 0, 2, 0, 0, 0, 0), .Dim = c(5L, 5L))
For each pair of columns, I want to calculate the proportion of entries
different than 0 in column j (i j) that have lower values than the entries
in the
Hi Sayan,
This is exactly what I was looking for - it worked perfectly.
Many thanks!!
Also, thanks to everyone else for their suggestions.
Pele
--
View this message in context:
http://r.789695.n4.nabble.com/For-loop-with-ifelse-help-tp2550547p2552388.html
Sent from the R help mailing list
Am 23.Sep.2010 um 18:27 schrieb Ralf B:
I wonder what the best way is to access those values. I am using the
following code:
x1 - c(1,2,1,3,5,6,6,7,7,8)
x2 - c(1,2,1,3,5,6,5,3,8,7)
d1 - density(x1, na.rm = TRUE)
d2 - density(x2, na.rm = TRUE)
plot(d1, lwd=3, main=bla)
lines(d2, lty=2,
I've found using the arm package to be very useful.
require(arm)
then use ranef(Full_model) and fixef(Full_model)
On Wed, Sep 22, 2010 at 05:39:41PM +1000, Lorenzo Cattarino wrote:
Hi again,
Sorry, probably I was not clear enough.
I was wondering if there is a way in R to
Hi Gennadi,
I think this is fixed in the latest version of the ncdf package, which you
can access by going to CRAN, then 'packages', then 'ncdf', and clicking on
'URL'. Or here is a direct link:
http://cirrus.ucsd.edu/~pierce/ncdf
Give that a try and let me know if you still have a problem,
On 23-Sep-10 16:52:09, Duncan Murdoch wrote:
On 23/09/2010 11:42 AM, wangguojie2006 wrote:
b-runif(1000,0,1)
f-density(b)
f is a list of things, including x values where the density is
computed,
and y values for the density there. So you could do it by linear
interpolation using
On Thu, Sep 23, 2010 at 12:18 PM, rasanpreet kaur suri
rasanpreet.k...@gmail.com wrote:
hi guys..thx for help
i have to perform a calculation
P-B/T-B
where P is the values in pdf and B is the values in bdf and T in tdf
You have 69 rows in your pdf data.frame, and something like 20 rows in
bdf
On Thu, Sep 23, 2010 at 9:50 AM, Struve, Juliane
j.str...@imperial.ac.uk wrote:
Dear list,
I would like to create a time series plot in which the paths of several
individuals are stacked above each other, with the x-axis being the total
observation period of three years ( 1.1.2004 to
You could do:
b - runif(1, 0, 1)
tmp - density(b, from=0.5, to=0.5, n=1)
tmp$y
As one direct approach.
You could also look at the logspline package for an alternative for density
estimation that provides you with a density function (and also allows for
finite domains).
--
Gregory
I was wondering if anyone has a way out of the limitation that you must use
equal length
x,y, and z sequence lengths.
For instance,
x-seq(1,100)
y-seq(1,100)
z-rnorm(100)
scatterplot3d(z,x,y)
works fine.
However, if I get some results that has a different y subset length, such as
x-seq(1,100)
Hi All
I have been trying to plot irregular XYZ data on world / country map, where X
and Y are llongitude and latitude coordinates and Z is a variable. My problem
is I get contour lines over water bodies. The method I follow is:
library(akima) library(maps) library(mapdata) library(gpclib)
You guys are really good.
Thanks.
--
View this message in context:
http://r.789695.n4.nabble.com/help-in-density-estimation-tp2552264p2552484.html
Sent from the R help mailing list archive at Nabble.com.
__
R-help@r-project.org mailing list
On 23/09/2010 2:10 PM, rtist wrote:
I was wondering if anyone has a way out of the limitation that you must use
equal length
x,y, and z sequence lengths.
For instance,
x-seq(1,100)
y-seq(1,100)
z-rnorm(100)
scatterplot3d(z,x,y)
works fine.
However, if I get some results that has a different y
Patrick--
One other option in addition to Thierry's suggestion, within R you might
also consider the ordinal package, which handles random-intercept models.
That said, if you are used to SPSS, I suspect this will be a titanic
pain trying to move to R (part. if just for this one
There was a typo error in my code below. See the inserted correction.
On 23-Sep-10 17:05:45, Ted Harding wrote:
On 23-Sep-10 16:52:09, Duncan Murdoch wrote:
On 23/09/2010 11:42 AM, wangguojie2006 wrote:
b-runif(1000,0,1)
f-density(b)
f is a list of things, including x values where the
1 - 100 of 113 matches
Mail list logo