Well ... that did it ... on Redhat 9 I had to use the following
DBD-Sybase-0.94
FreeTDS-0.53
Using Radiator 3.6
- Original Message -
From: "Mike McCauley" <[EMAIL PROTECTED]>
To: "Jacob Leaver" <[EMAIL PROTECTED]>; "Jamie Orzechowski"
<[E
Hello .. I tried downgrading to Radiator 3.2 to see if anything would change
... when I did a "make test" I got errors ... On version 3.6 I did not get
any errors ... perhaps something could be wring which is causing the SQL
request to fail ...
Please let me know what these errors are ...
Startin
Hello ... I just built a new RedHat 9 box and installed Radiator 3.6 +
Patches
Using FreeTDS and DBD::Sybase to connect to a MSSQL server for
authentication.
I did a LC_LANG fix and radiator starts fine...
I am also able to run my test scripts which query the same SQL server as
radiator uses. Th
user??
---
Jamie Orzechowski
RipNET System Admin
Tel.: 888-509-6677 x190
Tel.: 613-342-1579 (Direct)
Page: 613-341-0883
EMail: [EMAIL PROTECTED]
---
===
Archive at http://www.open.com.au/archives/radiator/
Announcemen
Hello .. I am having a strange problem with restartWrapper ... for no reason
the process will terminate
I call restartWrapper with
/usr/local/bin/restartWrapper -delay 2 -mail [EMAIL PROTECTED]
"/usr/bin/radiusd -foreground" &
A "ps ax" shows the following ...
26946 pts/1S 0:00 /usr/b
Hello .. I am trying to get IPSentry to send an authentication requets to
radiator so I can see if radius is up and working correctly ...
how can I construct a radius packet so it sends and auth request with
Username: uptimecheck
pass: ds83hjd93
I am able to do one now without the password and
Hello ... I have upgraded to Radiator 2.18.2 from 2.17.x ... AuthRODOPI no
longer works now ...
If I replace AuthRODOPI.pm from 2.17 it works fine ... this is RODOPI 4.04
here is my config ... I made a very simple config for this
AuthByPolicy ContinueWhileReject
RewriteUsername s/^(.*)\\(.*)/$
Subject: RE: (RADIATOR) Alive Records?
> It is a NAS setting.
>
> /Ingvar
>
> -----Original Message-
> From: Jamie Orzechowski [mailto:[EMAIL PROTECTED]]
> Sent: den 13 mars 2001 18:06
> To: [EMAIL PROTECTED]
> Subject: (RADIATOR) Alive Records?
>
>
> Hello ...
Hello ... I am noticing a bunch of "Alive" records in my details log ... is
there any way to disable these? .. I only want start / stop ... or is this a
setting in my NAS?
===
Archive at http://www.starport.net/~radiator/
Announcements on [EMAIL PROTECTED]
To unsubscribe, email '[EMAIL PROTECTED
hello ... I have a strange SNMP problem ... If I add the to my
cfg I get a bunch of message saying it can;t find the Handler for this
request ... if I comment out the SNMP section it works without any problems
... any ideas??
here is my config ...
Community xx
Identi
Hello ... I have 2 servers running radiator ...
when both are doing authentication they will BOTH crash at the same time and I
will get a page from restartWrapper saying it has restarted the service on one
machine then seconds later on the seconds server ... if I make the second server
only
I have switched to AuthBy DBFILE and I have a cron job rebuilding the DBFILE
every 5 minutes ...
I do:
/usr/bin/builddbm -u /usr/local/etc/raddb/users
I am noticing that while the DBFILE is being built that nobody can login ..
I get the following error ... any ideas how to correct this??
Fri F
Hello ... I would like to know if it's possible to authenticate via
onemethod (AuthBy FILE) and do accounting via AuthBy RODOPIso all
auth requests are handled via Auth FILE and all Accounting requestsare
handled via AuthBy RODOPIany ideas how this can be
done?
I am trying to use builddbm but I keep getting an error .. any ideas?
Can't call method "parse" on an undefined value at /usr/local/bin/builddbm
line 156, chunk 2.
My users file looks like
# 912998114 -- Robert McLennan
Password = ""
Framed-Protocol = PPP,
Framed-Ro
Hello ... I would like to know if it's possible to authenticate via one
method (AuthBy FILE) and do accounting via AuthBy RODOPI
so all auth requests are handled via Auth FILE and all Accounting requests
are handled via AuthBy RODOPI
any ideas how this can be done?
===
Archive at http://www.st
Hello! ... I just upgraded to 2.17.1
Our old radius used to log the password typed by
the user which was very informative for tech support purposes ... I was
wondering if anyone know how to do this in radiator via a .cfg file or what to
modify in the .pm modules to make this work ... any id
Hi There .. .I am trying to Build DBD:Sybase
I have installed sybase-ase-11.0.3.3-2.i386.rpm
I have installed DBI-1.13
I have Obtained DBD-Sybase-0.20
The ASE and DBI install go fine.
I then come to the DBD-Sybase install I modified the "CONFIG" file to
say
SYBASE=/opt/sybase
EXTRA_LIBS=-
I am trying to get my Unix (Redhat 6.0) machine to connect the MS SQL 6.5.
I want to use the FreeTDS module
my radius config looks like
AuthByPolicy ContinueWhileReject
DBSourcedbd:FreeTDS:rodopi
DBUsername Rodopi
DBAuth
I am trying to get radpwtst to work to test password via a command line ...
I try using
radpwtst -noacct -user username -password
and I get
sending Access-Request...
No reply
any ideas how to get this working ???
Jamie Orzechowski
RipNET Internet
Hi There ... I am using the USR Total control dictionary but I (I have TC's)
... but I keep getting the same message in my radius logs
Mon Aug 16 21:36:49 1999: ERR: Attribute number 38998 (vendor 429) is not
defined in your dictionary
Mon Aug 16 21:36:49 1999: ERR: Attribute number 39000 (vendor
I have a script that will preform SQL commands via my unix machine .. the
problem is that I need to run a large (more than 2 line) SQL statement
I have the line:
$sth = $dbh->prepare("UPDATE abacbill..logins set Password='$password' where
UserName='$username' AND DialAccount = 1");
this is the
olicy ContinueWhileReject
DBSourcedbi:Sybase:rodopi
DBUsername Rodopi
DBAuth xx
Filename /usr/local/etc/raddb/users
----------
Jamie Orzechowski
RipNET Internet Services
System/Network
28 15:29:15 1999: DEBUG: Packet dump:
*** Received from 208.137.248.41 port 1645
etc
etc...
--
Jamie Orzechowski
RipNET Internet Services
System/Network Administrator
Tel.: 888-509-6677 ext 293
Tel.: 613-342-3946 ext 293
Fax.: 613-342-8672
EMail.: [EMAIL PROTECTED
I have successfully created a database call ACCOUNTING on my SQL server with
all the tables I need ...
how can I make it authenticate via RODOPI as usual and also send just the
accounting records to another database (while still sending them to my
rodopi database also)
my config which works fine
I am having a problem with spammers and need a way to track them down.
what I need is a config that will send the:
date
start time
stop time
username
ip address
callerID
and store this into an SQL database (MS SQL 6.5) ...
I will then be able to make querys and pull up the info I need ... any
my problem is that I do not know what the address of the user will be ...
this is for a roaming setup ...
the user will login as [EMAIL PROTECTED] so I cannot use correct?
- Original Message -
From: Aaron Miles <[EMAIL PROTECTED]>
To: Jamie Orzechowski <[EMAIL PROTECT
username is checked against RODOPI (or
the local radius server)... could someone
please provide me with a config that does this ... thanks!!
---
Jamie Orzechowski
System/Network Admin
RipNET Internet Services
Tel.: 888-509-6677 ext 293
Tel.: 613-342-3946
I am using RODOPI as our billing system here and would like to setup
RODOPI's roaming feature ... could someone give me a quick config on how to
do this??
my current config is:
PasswordLogFileName /var/log/radius/password.log
AuthByPolicy ContinueWhileReject
DBSource
Hi There ... I am using radiator and RODOPI (excellent) for billing at our
ISP ... the problem with RODOPI is that it does not have a function to find
IP addresses for SPAM issues ... I do have all the radius logs sitting on my
unix box though ... I was wondering if anyone knows of a program that
I currently have a hacked livingston radius running which authenticates
anything ... this is used as a backup radius server in case our main on ever
went down. I was just wondering if Radiator can do this via the .cfg ?? if
so could someone shoot me a sample config ...
===
Archive at http://www
I am in the process of setting up RODOPI billing software
right now ...
RODOPI has a special area to enter ONLINE USAGE
URL
this is basically ftp://user:[EMAIL PROTECTED]/var/log/radius/logfile
I was wondering if this is required or does Radator
automatically connect the the RODOPI mac
In addition to my last post
if I COMMENT out the LINKTYPE=STATIC (it's commented by
default)
I get the following when I do I "make test"
[root@Mail DBD-Sybase-0.13]# make testPERL_DL_NONLAZY=1
/usr/bin/perl -I./blib/arch -I./blib/lib -I/usr/lib/perl5/i386-linux/5.00405
-I/usr/lib/per
nce to `bsd_tcp'
make[1]: *** [perl] Error 1
make[1]: Leaving directory `/tmp/DBD-Sybase-0.13'
make: *** [perl] Error 2
- Original Message -
From: Mike McCauley <[EMAIL PROTECTED]>
To: Jamie Orzechowski <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, May 14, 1
I got the http://sk.php.net/extra/ctlib-linux-elf.tar.gz and untarred it to
/opt/sybase
I then got the DBD-Sybase and edited the CONFIG file and changed
"EXTRA_LIBS=-linsck" as it says this is needed for linux ...
I then run a perl Makefile.PL and get the following
[root@Mail DBD-Sybase-0.13]#
I think I was mistekn with the SYbase DBD stuff for
RODOPI ... could someone please clear this up for me ...
I am running RODOPI and MS SQL 6.5 and Radiator on
UNIX
What are the DBD PERL modules I should use in order
to get it working correctly ... I am thinking I should use the ODBC ones
I have installed DBI for Linux and now I am trying to get
DBD-Sybase-0.13.tar.gz working
correctly .. I try a "perl Makefile.PL" and I get the
following
//
Please set SYBASE in CONFIG, or set the $SYBASE environment
variable at Makefile.PL line 71, chunk 33.
//
anyone know what this sho
I am using Radiator and RODOPI as my billign system .. I can't
seem to find the Sybase Client needed for Radiator .. All I have found is the
DBD-Sybase
DBD-Sybase-0.13.tar.gz
anyone know where I can find the Sybase client
library?
I am now getting ready to setup radiator using RODOPI and I
have a few questions
1) When I set my Radius accounting server in my NAS do I put
the IP of my RODOPI server or do I use the IP of the radiator
server?
Can someone please send me an example config that does the
following
Auth
uot; which was supposed to be "mhz" ... so the rewrite
rules let the user log in but did not correctly send his rewrote userid ...
any ideas? run radiator on the accounting machine also?
- Original Message -
From: Stephen Roderick <[EMAIL PROTECTED]>
To: Jamie Orzechow
Hi There ... I was wondering if anyone had a config for me that will convert
all usernames to lowercase and also strip off anything after (and including)
the @ symbol ... some people try and login with their [EMAIL PROTECTED] which
will not work ... it will have to do the converting of the name be
I got radiator to work with /etc/passwd now so it
authenticates from there ... but I also have a users file with a few accounts
setup to get static IP's ... I checked my users file and it's fine but I always
get a rejected for a user in the users file any ideas???
it says
DEBUG: Handl
I got radiator installed annd setup my radius.cfg
I copied the dictionary.usr to
/usr/local/etc/raddb/dictionary
also moved the users file into there
when I run radpwtst -user xxx -password xxx I get the
following error ...
sending Access-Request...
Can't call method "identifier"
Hi There ... I just just installing Radiator on Redhat 5.2 for
the first time ... I got perl Makefile.PL and then make to run fine (all passed)
... then I run perl radiusd -config_file goodies/simple.cfg so that I can test
it and it justs sits there and I see no error messages or success mess
43 matches
Mail list logo