Thanks for the offer, but Joe hooked me up!
Kyle
On Tuesday, May 12, 2020 at 6:21:20 PM UTC-4, aeroperf wrote:
>
>
> Kyle-
>
> I may have what you need, but I have no idea what to charge/trade. You’d
> get the entire L+R unit.
>
> After 4 years riding my Sam I wanted to try a “real” road bike
Like many of you I'm sure, I rarely discard bike parts. But for some
reason I recently tossed some old 6-speed downtube shifters - why the hell
would I ever need those? Naturally, I have now determined that I
absolutely need a front DT shifter (replacing a bar-end) so I can put a
mirror on th
might have a mm of clearance. thanks for looking, but looks like I need 32s or
smaller.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+un
Assembling a bike from parts, 650B conversion, need some 28-32 650B tires.
You know those ones you took off your bike because they were worn or old
but didn't have the heart to throw out? Yeah, those.
I do have some practically unused Fatty Rumpkins (too wide for my use case)
to trade.
Tha
Two brakes, full bikes worth, never opened. Not sure why the label says
"rear", these will work with either front or rear.
https://www.amazon.com/photos/share/fjbR4ixSS3EAq2ch2UMKFEpex2qaW0vjU9WifOlMysr
https://www.amazon.com/photos/share/CTajtphkt3jsJMJIilerEzP9FyKsWcOi1rX1JHMjqFJ
$30 shipped
For sale, lightly used Dia-Compe 750 Centerpull brake set with upgraded VO
Roller Straddle Cable Hangers.
https://www.amazon.com/photos/share/Xvx9qQzugC6gm9NP7XQEaX8ckuI7jPYuHgqRUSQpmei
https://www.amazon.com/photos/share/jBa67uEAKRXKULmluEFoBerSN8wmDPSHU6kfwTD1ZDf
https://www.amazon.com/photo
yeah, also going to put in on the rear, don't need any front blowouts.
On Saturday, March 5, 2016 at 5:46:57 PM UTC-5, Tim wrote:
>
> I had zero luck with a boot on my Compass Stampede Pass Extralight. Those
> are thin sidewalls. It ended my PBP. You may have better luck but if you
> boot it and
and yeah, those are really thin sidewalls.
On Saturday, March 5, 2016 at 5:23:08 PM UTC-5, KyleBH wrote:
>
> I have a Grand Bois Cypress tire (700 x 30) with <1000 miles and plenty
> of tread life left, but just noticed it has a 1/4" tear in a sidewall. Is
> it garbage?
I have a Grand Bois Cypress tire (700 x 30) with <1000 miles and plenty of
tread life left, but just noticed it has a 1/4" tear in a sidewall. Is it
garbage? Boot it and go with it?
Thanks,
Kyle
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bu
Spring Cleaning Half Price Sale! (I figure both items below are around $100
new)
Shimano SPD Sandals, Size 45-46, Light wear, wash 'em up, basically good as
new. *$50*
https://www.dropbox.com/s/tfhchxnsfxq9x7a/2015-05-03%2013.30.41.jpg?dl=0
https://www.dropbox.com/s/nd8ofil05vfmxy1/2015-05-03
Finally selling this oddball vintage classic quirky Joe bell painted lugged
steel frame. Have had it for about 12 years, had lots of fun tinkering,
changing, touring, etc... with it, but it's time to move on. If I recall
correctly, the guy I bought it from sorta remembers the guy he got it fro
I have a Technomic stem, 10 cm length, 26mm clamp that I'd like to trade for
the same with a 7 cm length.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to r
Are the new Sam geometry details available? The Riv chart on Google docs
has not been updated yet.
>
>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-
Any tips/suggestions for bending some aluminum struts for the Nitto
Top Rack? The braze-ons on my new bike are fairly low (compact frame)
and the struts on the top rack only come out parallel to the rack, and
end up too high. So I need a 3o degree bend or so.
Probably not rocket science, just cl
14 matches
Mail list logo