I’m so glad I’m not the only one that has these kind of “user errors” when
working on bikes.
Always learning from this list,
Edwin
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails
I had this problem with a Pinhead (pitlock-like) seat binder I recently
purchased from a listmember. It's a bunch of pieces and it took me a whole day
to figure out how to mount them. Then it didn't even fit my frame!
--
You received this message because you are subscribed to the Google Groups
Sometimes, you just have to stare at it for a while before it makes sense. Glad
you figured it out!
--Eric Norris
campyonly...@me.com
@CampyOnlyguy (Twitter/Instagram)
> On Feb 25, 2019, at 3:07 PM, Friend wrote:
>
> I had the toothed washer on the wrong side of the skewer. I had it on the
Thanks for all the advice! It's been solved. I'm just going to call it a
silly user error.
On Monday, February 25, 2019 at 5:18:40 PM UTC-5, Eric Norris wrote:
>
> Is the threaded portion the same? Perhaps you’ve reached the end of the
> threads on the skewer before it gets tight?
>
> --Eric
Is the threaded portion the same? Perhaps you’ve reached the end of the threads
on the skewer before it gets tight?
--Eric Norris
campyonly...@me.com
@CampyOnlyguy (Twitter/Instagram)
> On Feb 25, 2019, at 1:58 PM, Friend wrote:
>
> the front pitlock is fine. When I tighten the rear one with
What type of dropouts?
PJW
On Mon, Feb 25, 2019 at 4:26 PM Friend wrote:
> Hi friends,
> I recently got a Pitlock skewer set and after I installed it I noticed
> some play/wiggle in my rear rim. When I try to tighten the skewer further
> the bald/coned end just turns with it. I can't seem to
Is the axle moving in the dropout? If it's not and the rim has play, your hub
bearings need to be adjusted.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
Hi friends,
I recently got a Pitlock skewer set and after I installed it I noticed some
play/wiggle in my rear rim. When I try to tighten the skewer further the
bald/coned end just turns with it. I can't seem to get the skewer tight
enough but it seems to be the same length and my previous