Joe,
I have one of each.
for 150:
bar width is ~67cm
max reach is ~16.5cm center to center measured horizontally from the
extension of the quill axis (long hex wrench).
reach at bar end is ~1cm
extensions are ~16cm long and 17cm apart at the bars
Max rise ~16cm along quill axis from the top of
I have 2 sets of the 150mm bullmoose bars; green (on my Bombadil) and
silver (to go on my SimpleOne). I have long been a fan of the
original bullmoose bars from the mid-80s, but these Riv Nitto bars
(with their unique combo of longer reach and sweep) have really grown
on me and are clearly my
i have a pair that i just listed on ebay with a low starting price,
200mm.
i think the longer ones are perfect. the reach at the end of the bar
is more like 7-8cms. the extra length at the front is really nice for
laying low and digging into a headwind.
--
You received this message because you
I'll post measurements this weekend.
I'm so far out of the mainstream when it comes to bar height that I don't
have a general sense of normal.. but FYI...
Height is an area where the Bullmoose bar is seriously constrained relative
to other RBW offerings. You may be looking for something well
On Thu, May 17, 2012 at 2:07 PM, Thomas Lynn Skean
thomaslynnsk...@comcast.net wrote:
Thanks for all the great info, Thomas! I do have one of the stem risers and
will mull over those possibilities, too. I understand just what you mean by
the penned in feeling. That's the problem I have with the
