Finally installed the Dia Comp 750s with the VO Zeppelins.
With a bit of fiddling, I'm pleased.
David
https://lh4.googleusercontent.com/-COCKVTXichU/UfB-1RAO46I/AFE/c9iWVihJgoU/s1600/AHH-Build-7.24.13.jpg
On Saturday, June 22, 2013 2:17:37 PM UTC-4, Davidbea wrote:
I understand the
The place that looks tight is not so much the width, but the rear length.
It looks like the tire might hit the too long rear bolt that honjo vo
use on al fenders. Bertoud fenders definitely offer more front to back
clearance. These fenders came to me used and I don't know if the stays
have
I understand the Saluki and Homer have similar 'issues' with Hetres and fenders.
I'm switching to Dia Comp 750 center pulls from the silver side pulls as it
looks like that will give me a little more clearance.
I've picked up the brakes but haven't got a chance to put them on.
Still conflicted
I've seen Hetres on a fendered A Homer Hilson and it fit, but boy did it
not have much wiggle room. My comfort zone suggests having a pencil width
of space between the tire and the fender, while the Hetre I saw would be
lucky to have half a pencil width. I would go with William's suggestion of
-
From: Toshi Takeuchi tto...@gmail.com
To: rbw-owners-bunch@googlegroups.com
Sent: Friday, June 21, 2013 5:04:32 PM
Subject: Re: [RBW] Re: Saluki love tires
I've seen Hetres on a fendered A Homer Hilson and it fit, but boy did it not
have much wiggle room. My comfort zone suggests having
I have VO Zeppelins with Hetres on mine. Side pull. No problems.
-J
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
I ran the same set up, no issues.
On Fri, Jun 21, 2013 at 11:08 PM, justinaug...@gmail.com wrote:
I have VO Zeppelins with Hetres on mine. Side pull. No problems.
-J
--
You received this message because you are subscribed to the Google Groups
RBW Owners Bunch group.
To unsubscribe from
Hetres will fit your Saluki front + back just fine. Fenders, on the other
hand, can be an issue. VO makes a few sizes ... you'll want to measure
yours first to be sure ... look for at last 52mm inside across the span. I
use 50mm SS Berthoud's (via Mike Kone's online store) on both a Saluki and