Wrenches,
Thanks for all the response regarding the OB BTS. Fortunately I have
since found an old OB version banging around so will head back to the install
to swap it out.
Bill
- Original Message -
From: b...@midnitesolar.com
To: RE-wrenches
Sent: Friday, Septembe
On 9/12/2014 6:40 PM, All Solar, Inc. wrote:
Pretty sure Midnite sent out some of the classics with a Magnum BTS.
Due to part shortage.?
Installed one in June this year.
Yep. Gotta stay on top of this stuff, especially when building in the
good ole US of A !
Luckily, it was a short lived
Pretty sure Midnite sent out some of the classics with a Magnum BTS. Due to
part shortage.?
Installed one in June this year.
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for
Bill:
We no longer use RE. BOS cabinets for AC. We use off-the shelf load centers
with interlocks, often the item you cited. Trace used to have an IPP that used
the QO2DTI. It's a good solution.
WM
Miller Solar
> On Sep 12, 2014, at 2:36 PM, Bill Loesch wrote:
>
>
> Fellow Wrenches,
>
>
2 cents here...
As far as I remember, OB is 10K Ohms (at 25degrees C), MidNite is 10K,
Magnum is 100K and Xantrex/Trace/Schneider is 100K
Magnum has a couple of swapped lines compared to the other BTS' but
~may~ or may not
work for others in some instances.
boB
On 9/12/2014 2:48 PM, Jerry
No it will not work right
On Sep 12, 2014 2:56 AM, "frenergy" wrote:
> Wrenches,
>
> I just replaced a failed XW. is the XW BTS compatible with an
> FM60? Thanks in advance,
>
> Bill
>
>
>
> ___
> List sponsored by Redwood Alliance
>
> Lis
Fellow Wrenches,
Has anyone used a "Generator Interface Device" aka Mechanical Interlock
Attachment, Square D p/n QO2DTI
instead of a subpanel?
Bill Loesch
Solar 1 - Saint Louis Solar
314 631 1094
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / V
Hi:
It was pointed out to me that I misread the question about the XW BTS.
No, the XW BTS will not work with the FM60.
My apologies to everyone, I will read e-mails more carefully in the
future.
JARMO
_
Jar
Hi:
Sorry to hear you had such trouble with the XW.
Yes, the battery monitor can be used with battery based system. The
monitoring and logging is done in its own internal memory.
Here's a link to the user docs,
http://solar.schneider-electric.com/product/conext-battery-monitor/
JARMO
___
Bill,
No, the Xantrex Temp sensors are not compatible with the Outback temp sensors.
You'll have to get an Outback BTS for the FM60.
From: RE-wrenches [re-wrenches-boun...@lists.re-wrenches.org] on behalf of
frenergy [frene...@psln.com]
Sent: Friday, September
Wrenches,
I just replaced a failed XW. is the XW BTS compatible with an FM60?
Thanks in advance,
Bill
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
ht
11 matches
Mail list logo