Turns out I have a 400' roll of the Midnite wire which I do not need
(client changed mind, and I cannot get my supplier to take back - very
annoying!) and am willing to sell cheap,but you'd probably do better
sourcing from Midnite since shipping from VT will probably be prohibitive.
Howie
*Howie
Or you can sleeve it in innerduct.
On Fri, Apr 28, 2017 at 10:41 AM, Tump wrote:
> Midnite has this and can sell it to you directly if you wish.
>
> On Apr 28, 2017, at 7:36 AM, Dana wrote:
>
> Thanks I will look into this option. This is my first go around
Midnite has this and can sell it to you directly if you wish.
> On Apr 28, 2017, at 7:36 AM, Dana wrote:
>
> Thanks I will look into this option. This is my first go around with the
> rapid shut down & was going with the Midnite manual recommendation. So far
> sourcing this
Not an LB, but conduit body (straight).
This is how Backwoods Solar used to sell the class T fuseholder.
Also the code says splices are allowed as long as the conduit body is marked
with its volume by the manufacturer.
Glenn
-Original Message-
From: "Tump"
Sent:
Thanks I will look into this option. This is my first go around with the rapid
shut down & was going with the Midnite manual recommendation. So far sourcing
this has not been easy.
Dana Orzel
Hi William,
Check out NEC 314.16(C)(2):
I don’t know per se about putting fuses in conduit bodies, but the code
allows for some limited splices, taps, or devices in conduit bodies.
August
*From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
Behalf Of *William
I have seen these conduit boxes torch off, like to see and have in free air.
Supporting battery cable makes more sense then the hassle of installing this is
a LB.
T
> On Apr 27, 2017, at 7:41 PM, Jerry Shafer wrote:
>
> Wrenches
> In the event you or some else
7 matches
Mail list logo