Hey Jay,
From my understanding the OCPD needs to be within 18 inches from the
positive terminals... some will use class T fuses instead of breakers for
cost...
On Dec 3, 2017 7:10 PM, "jay" wrote:
> So I”m curious about the location of your breakers. Can you elaborate
> about that?
>
> Thank
Always as close to the batteries as practical, remember is does not have to
be at the end, between any dattery in that string, as a safe precausion at
the 24 volt point is nice at it will keep the peak voltage at 24 vs the
bank of 48 if in open position.
Jerry
On Dec 3, 2017 5:10 PM, "jay" wrote:
HI All
Thanks for the information on the buss bars.
And FYI the Stormcopperstore is not longer live.
But the stormpowercomponents is the correct one.
Would this also be the place to get battery series interconnects?
Or are is there anywhere else that someone can recommend.
thanks again for a
So I”m curious about the location of your breakers. Can you elaborate about
that?
Thanks
jay
peltz power
> On Dec 2, 2017, at 1:51 PM, Gary Willett wrote:
>
> JERRY:
>
> I always specify separate breakers per string (175A or 250A, depending on
> string ampacity) mounted as close to the ba
4 matches
Mail list logo