WrenchesI think its in the inverter or battery but somewhere before it leaves
the inverter flickering lights indicates the inverter is seeing the issue up
close, a 4 k inverter is 33 amps AC but Over 166 from the 24 volt batteries if
the load if half that with lights and inverter is strugl
The last job I used a mini excavator with auger drive head and put in
ground screws worked great only trouble was getting plumb,
On Fri, Feb 9, 2018 at 11:13 AM, Chris Mason
wrote:
> They require you contact a certified installer. That's not happening here.
>
> On Fri, Feb 9, 2018 at 1:04 PM, La
Dana my 1/2 HP 240 volt pump draws about < 2 amps, which is maybe 3.3 amps
if it is 120 volts. I wonder if the high volt drop is leaving your pump in
locked rotor for a long time, in which case a soft start will not help.
Perhaps a buck-boost transformer (about 150 watts) boosting 16% would get
t
Gary I have been told that below a certain voltage the LI-ion cells suffer
a permanent death. I believe these batteries are small cells in
parallel.strings and then series connected strings. to make the
voltage.can you use a lab power supply to start the charge? I purchased
one for about 60 to 9
Does anyone have any information or specifications for an older circa
2010-2012 iCel System Lithium Ion Battery. We are doing a repair on an
older 48V Lithium Ion system consisting of 3-6 ICel batteries wired in
parallel and 1 Xantrex 6848 and 2 Xantrex Conext MPPT 60 150 Solar Charge
controllers.
Hi Dana,
We have been using Grundfos SQ-O 1/2 hp, 5 GPM (or they have a 10 GPM
model) soft start pumps for years, with great outcomes. We have sold 60
or so over the years with no returns.
Daryl
> Hey all you solar wise guys,
>
>
>
> I am looking for a recommendation based on your experi
Hey all you solar wise guys,
I am looking for a recommendation based on your experience, not just data
sheets for a 120 volt-9.8 amp-1/2HP well pump soft starter. Every time the
well pump starts the SW4024 groans and the lights flicker.
There are a lot of units that claim to soft start a ½
They require you contact a certified installer. That's not happening here.
On Fri, Feb 9, 2018 at 1:04 PM, Larry Brown wrote:
> We have been using Techno Metal Posts Helical Piers with much success for
> many years
> Larry
>
> Larry Brown
> Sun Mountain
> 845-657-8096 <(845)%20657-8096>
> sunmou
I’d use a two-man gas auger.
Nick Soleil
Product Manager
Enphase Energy
Cell: 707-321-2937
On Feb 9, 2018, at 7:05 AM, Chris Mason
mailto:cometenergysyst...@gmail.com>> wrote:
I'm taking on construction of a ground mount system of about 30KW. My previous
experience has entailed using a utility
We have been using Techno Metal Posts Helical Piers with much success for many
years
Larry
Larry Brown
Sun Mountain
845-657-8096
sunmount...@netstep.net
Sent from my iPhone
> On Feb 9, 2018, at 11:48 AM, Chris Schaefer wrote:
>
> While I've been using the Zilla platform with an auger attachm
While I've been using the Zilla platform with an auger attachment for a
mini excavator with good luck. With that said I'm looking at Nuance Energy
and their Osprey mount which requires a hammer drill. Anyone tried this yet?
Christopher
On Fri, Feb 9, 2018 at 11:35 AM, Jerry Shafer
wrote:
> Chri
Chris
Azk around for a fence contractor, they generally have what you need
Jerry
On Feb 9, 2018 5:05 AM, "Chris Mason" wrote:
> I'm taking on construction of a ground mount system of about 30KW. My
> previous experience has entailed using a utility truck mounted auger for
> the holes but that's
I have a two man gas powered unit, not very confident of it.
On Feb 9, 2018 11:55, "James "Jibril" Gustafson"
wrote:
> Hi Chris,
>
> In the past I have had success with renting a skid steer with auger, or a
> mini excavator with auger. With a little practice you can become
> proficient with the
Hi Chris,
In the past I have had success with renting a skid steer with auger, or a
mini excavator with auger. With a little practice you can become
proficient with the machines, the hardest pasrt is getting a plumb hole.
The mini excavator is nice, with a thin digger bucket you can also do your
I'm taking on construction of a ground mount system of about 30KW. My
previous experience has entailed using a utility truck mounted auger for
the holes but that's expensive. The soil type here is fairly soft, not
rock. There's no contractor available with a skid steer mounted auger. I
need at lea
15 matches
Mail list logo