[RE-wrenches] Industry Publications

Wrenches, Like myself, I imagine many folks on this list were avid readers of "Home Power" and "SolarPro" magazines. I know some of you were even active contributors to these two wonderful publications. Is anyone aware of any similar resources - geared toward system designers/installers/technicia

Re: [RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

When I did my cable swap and reconfiguration that fixed it I also was more careful to route the xanbus cables away from the batter/inverter cables - thinking that perhaps induction was the culprit.  As I have an rj45 crimp tool and some shielded CAT5e in the truck I think I'll just make up my o

Re: [RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

I tried swapping the cables for the XW and MPPT. After reboot the XW continued to show up on the SCP but the MPPT did not. I didn't have another cable, but this suggests the cable is not the problem. I didn't think to change the order, however. On Thu, Apr 16, 2020 at 5:57 PM Jeff Clearwater w

Re: [RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

I tried all that. Totally disconnected everything, let it rest, reconnected. Nothing. How would I reset to factory defaults if it's not found in the SCP? On Thu, Apr 16, 2020 at 4:36 PM Dave Angelini Offgrid Solar < offgridso...@sti.net> wrote: > Hi Jason, > > I would start with the easiest th

Re: [RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

Hi Jason, I would start with the easiest thing first. Since there is not a device you cant see faults and warnings. disconnect xanbus at mppt. power down (and disco HV input) for 30 seconds. Repower and see if the warning light goes out? If mppt does not get found on SCP, I would reset mppt t

Re: [RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

Hi Jason, Have you rebooted it? I’ve found that usually unplugging and replugging and possibly turning the CC on/off works. Jay Peltz Power > On Apr 16, 2020, at 1:03 PM, Jason Szumlanski > wrote: > >  > I am working with a client (not my install) with a XW6048 and MPPT 80 600 > with a

[RE-wrenches] Xantrex MPPT 80 600 Not Showing Up in SCP

I am working with a client (not my install) with a XW6048 and MPPT 80 600 with a SCP. The SCP is not showing the MPPT in the setup menu. I am able to access the system settings and XW configuration, but not the MPPT settings. It is connected via Xanbus in this manner: SCP -> MPPT -> XW So the MPP