I talked with a senior tech from OB this am.
The issue why OB doesn’t recommend the FX and non A radians has to do with the
LBCO is non adjustable for time. It’s set at 6 minutes. You can change the
voltage of course. Reading between the lines they are worried that you will get
battery
Kirk
I would be interested in your amended programming with outback and blue
planet
Jerry
On Mon, Aug 10, 2020, 6:43 AM Kirk Herander wrote:
> http://outbackpower.com/downloads/documents/appnotes/lithium_app_note.pdf
>
> This doesn't explain it, just omits older FX inverters from the Outback
>
Is it the heat that damages them or UV light?
Jay
Peltz power.
> On Aug 10, 2020, at 5:13 PM, Chris Sparadeo wrote:
>
>
> Jason,
>
> Yes the LCD displays can be swapped out. I had an issue with one earlier this
> year on a SB6000US and SMA sent a replacement. Very easy to swap out. Good
I replaced one about 2 years ago. SMA Sunny Island tech support just sent me a
new one.
Sent from my iPad
> On Aug 10, 2020, at 3:05 PM, Jason Szumlanski
> wrote:
>
> Does anyone know if the LCD displays can be replaced? I have a client with
> three SB6000US and one SB3000US all
Jason,
Yes the LCD displays can be swapped out. I had an issue with one earlier
this year on a SB6000US and SMA sent a replacement. Very easy to swap out.
Good luck with tech support.
-Chris
On Mon, Aug 10, 2020 at 7:20 PM Jason Szumlanski <
ja...@floridasolardesigngroup.com> wrote:
> I'm
I'm zeroing in on an answer and will share when I get it. I sent an email
at the recommendation of the first-line customer service rep. One person
responded saying to call customer service (haha). A few minutes later
another one said the cover needs to be replaced to maintain the NEMA
3R rating
Does anyone know if the LCD displays can be replaced? I have a client with
three SB6000US and one SB3000US all manufactured in 2007 and all four
displays are shot. I'm not sure why it is so hard for SMA tech support to
give me a simple answer on this. I just had a mind-melting hour-long phone
call
I agree on the Trace and Xantrex SW's for offgrid. Bullet proof and easy
to install. I could never go back though to not having the graphics that a
networked system enables. Just to easy to look at a 24 hour battery graph
and see that the battery charged. Also multiple banks can be looked at.
I agree, the AES has a much friendlier voltage range. Thanks for
sharing, Dave. I also do not use the RE Optics, I've moved away from
Outback as well, after having issues with the FXR line, tech support,
and wiring in the tiny enclosure that comes with the Radians. Had
decent luck with
Ah that was the metric I didn’t understand the 2-10, is minutes.
got it
j
> On Aug 10, 2020, at 1:24 PM, Dave Angelini Offgrid Solar
> wrote:
>
> I have forwarded this to Schneider. They gave me a case number in 30 minutes.
> I disagree that "all" Li batteries need this. Obviously
Appreciate forwarding this to Schneider. So you never had any issues
programming their monitoring system or getting it connected to the
internet via the customer's router?
What is the LBCO recommended for the Li+ batteries you are using?
Default on many inverters for FLA is 42 or 44 volts,
I have forwarded this to Schneider. They gave me a case number in 30
minutes. I disagree that "all" Li batteries need this. Obviously simplyphi
does need LBCO to be increased. The LBCO delay does help at 10 minutes from
2 minutes default BTW.
I have not had your issues with tech support.
It relates specifically to Simpliphi, but all brands of Li+ need much
higher LBCO set points compared to Lead acid. Hysteresis and time don't
fix the fact that once the batteries shut off before the inverter, the
entire system is inoperable, with no charging available from the PV. It
creates
http://outbackpower.com/downloads/documents/appnotes/lithium_app_note.pdf
[http://outbackpower.com/downloads/documents/appnotes/lithium_app_note.pdf]
This doesn't explain it, just omits older FX inverters from the Outback
compatible list.
In terms of programming, I did not use Blue Planet's
Hey Ray,
Your comment on Schneider LBCO relates to which brand?
Sympliyfi? Curious because I will send this in again. I did last time and
they said to make sure the config person knows that you can also set the
default LBCO hysteresis from 2V to 10V and the LBCO time from 60 seconds up
to 600
15 matches
Mail list logo
