Re: [RE-wrenches] wire clips for Sunmodo rail

2020-09-07 Thread Kent Osterberg
Kirk, I think you'll probably have to use a stainless cable tie going all the way around the rail. The hanger clips you inquired about would probably be a poor choice on the sloped rails anyway. Another possibility, admittedly most costly and labor intensive, is to use something similar to th

Re: [RE-wrenches] wire clips for Sunmodo rail

2020-09-07 Thread Kirk Herander, VSE
Thanks, Unfortunately the HR300 rail which I'm using has no side channels, just 1/4" top and 3/8" bottom ones. Kirk Herander / kirkh@vermont.solar [mailto:kirkh@vermont.solar] Owner|Principal, VT Solar, LLC Celebrating our 29th Anniversary 1991-2020 www.vermont.solar [https://nam02.safelinks.pro

Re: [RE-wrenches] wire clips for Sunmodo rail

2020-09-07 Thread Kent Osterberg
Kirk, For the HR150 rail, Sunmodo has a channel clip, part A20252-001 or A20252-BK1 (black), that will hold the wires in the channel on the side of the rail. I don't see it in their recent catalog, but I have purchased them recently. For the heavier rails, which are probably being used on th

[RE-wrenches] wire clips for Sunmodo rail

2020-09-07 Thread Kirk Herander, VSE
All, I am installing a Sunmondo ground mount for for first time. They don't offer a wire clip to work on their rail. One which clips in the top channel and hangs off the side, that is. The top channel accommodates a 1/4-20 screw, but the rail is wider than any I've used before, thus i can't find