Friends:
I was using the wrong Cat5 port on the FM100! Oops… With the correct port
connected directly to the Mate3s, not Hub, no jumpers changed, no
rebooting, it worked just fine.
Thanks everyone.
William
Miller Solar
17395 Oak Road, Atascadero, CA 93422
805-438-5600
www.millersol
Hi Ray,
I'll chime in on this one. My Magnum MS4024 is fine for old tube amps
and the recording equipment in my studio -- very low noise floor -- but
I have to power guitar pedals with 9v batteries. Powering the pedals
with wall warts causes a huge 60Hz buzz. I've tried different
transform
The load was 8 Marshall Super Leads for my application. And while EVH used
a variac for test and studio in early days, he toured with Super Leads and
then to the EVH amps with 4 6L6 vacuum tubes each. A few others also. I saw
his backstage set-up in the 80's and he had an AC supply regulator with a
Hi Ray,
Given how small your load is and with what Bryan has suggested, it would be a
very inexpensive way to go.
If you need battery charging while using it and you find noise through battery
charger then using a 2 battery system with harness of Anderson connectors would
all you to disconnec
Ray, we use Samlex on our oyster farm. We have a 24 Volt system which
powers pumps and an oyster sorter. The sorter takes 240 and transforms
to 208. We have not had any issues except that we sometimes have to
turn off the inverter and then back on to energize. The GFI is also a
little cranky
5 matches
Mail list logo