Greg,
I logged into SOS.Fronius.com and entered the 573 error code for a Primo
3.8 inverter. The diagnosis says
"Power derating because of too low ambient temperature."
Does it get too cold in Alaska?
Dave Lee
ROAM Solar
San Carlos, CA
On Tue, Mar 14, 2023 at 8:12 PM greg egan via
Greg,
My Fronius manual goes up to a code 517 but no "higher". I
assume you're talking about an "IG". The last Ph # I used for them was
810-220-4414.
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.(shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA
Wrenches,
I'm out of town and trying to help a customer with a STATE 573 error on
a Fronius 3.8 kW inverter installed in 2017. I looked on line and could
find State codes but no "573". Customer sent me a photo of the screen
and it's definitely 573 so not a typo. If anyone has run into this
HI All,
Does anyone have a very high up contact at sol ark?
A few months ago I was writing about a buddy who had a stacked 12k.
Hes a competent installer.
It was designed by sol ark,
All loads were included correctly.
The system was monitored by sol ark
Numerous board failures, incorrect
HI Ray,
I’d researched this when I lived in an area that was fire prone.
I would recommend reading this info about the product and how it works and what
it doesn’t work for.
https://www.7thgenerationdesign.com/wp-content/uploads/2018/12/fire-WEEDS.pdf
I decided to make this a 2nd thread, so as not to high jack the original
theme.
I have a question: it sounds like you are not spraying the roof, because
its metal? Isn't the plywood and rafters still vulnerable underneath
the metal, or no? I'm concerned with large hot embers.
Can you post
I can help with this as Michael built something similar to what I designed and
installed in 2001:
I plumbed small irrigation sprayers every ~15' around the perimeter of my
buildings under the eaves. This wets down the perimeter of the structures,
particularly the combustion zone where the
7 matches
Mail list logo