Re: [RE-wrenches] Racking for Steep Roofs

2015-10-14 Thread Aram Alexander
Pro solar will work just fine. Aram > On Oct 14, 2015, at 2:56 PM, Jerry Shafer wrote: > > I would suggest calling unirac as it may be a software issue that uou are > having but they will confirm eitherway > Jerry > >> On Oct 14, 2015 9:25 AM, "Garrison Riegel" >> wrote: >> Wrenches, >> >

Re: [RE-wrenches] Problem with NABCEP ad

2011-02-06 Thread Aram Alexander
No you are not. I have been installing grid tied PV for 10 years in ca. Nabcep is union based and all though it is good but it does not mean by any means the best as we have to fix several nabcep installed systems. I personally don't like there advertising either Aram On Feb 6, 2011, at 9:13 AM

Re: [RE-wrenches] Megger Testers

2009-04-11 Thread Aram Alexander
This is the one I use. http://www.emsco-usa.com/fluke/fl1520.htm Aram -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Darryl Thayer Sent: Saturday, April 11, 2009 3:51 PM To: RE-wrenches Subject: Re: [RE-wre

Re: [RE-wrenches] Hardware request

2009-03-28 Thread Aram Alexander
S5 now has a stand off that spans the high point of the “sine wave” in the corrugated roofing, including butyl tape on each foot. It’s already engineered. My 2 volts, Aram _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behal

[RE-wrenches] Fw: Uncaught bounce notification

2009-02-04 Thread Aram Alexander
An email I sent to SEIA President , Rhone you don't know me but I am a Solar contractor in CA, have been for more then 8 years, Sold, designed, installed over 400 systems. I buy a lot of Material related to the solar industry, so I know pricing. The NY Times has quoted you as saying " The pri

Re: [RE-wrenches] dpw top of pole mount pipe problems

2009-02-02 Thread Aram Alexander
Hey guys I do a lot of ground mounts, and Top Of Pole is one of our main type of installs DP& W our top of the line products, but they are only warranting the RACK, they are suggesting the footing and pole size YOU should always get a LOCAL engineer to engineer the Pole size and footing

Re: [RE-wrenches] CA CSI warranty interpretation

2008-11-19 Thread Aram Alexander
Re: [RE-wrenches] SWH data loggingGood day folks, In California, as a Lic. Contractor you are responsible if you make changes to an existing structure. Now if you were to sub out the roof penetrations to a Lic. roofing contractor you could pass that responsibility to them. But you as the Solar