Hi all,
I have a student who is looking for a solar thermal expert to look at an
ailing system in Anaheim, CA. Who could he call?
Thank you in advance,
Kelly
___
List sponsored by Redwood Alliance
Pay optional member dues here:
, etc, and show distances.
Suggestions?
Thank you in advance,
Kelly
~~~
Kelly Larson
707-223-3209
Box 18094
Reno, NV 89511
Electrical Engineer
NABCEP Certified PV Installation Professional™
NABCEP Certified PV Installer Specialist™
NABCEP Certified PV Commissioning & Mainten
Hi y'all,
Since I haven't been doing layout/design recently, I wonder what
software I can recommend to a client. He is a newbie doing mostly
commercial systems - some roof and some ground mount. The software
needs to layout strings for string inverters, calc voltage drop,
conductor sizes,
Hi fellow wrenches,
Has anyone seen the new version of IEC 62446? I am wondering if they
added an entry for insulation resistance tests with an array voltage
above the ">500V" category.
Thank you in advance,
Kelly
~~~
Kelly Larson
707-223-3209
Box 18094
Reno, NV 895
variability of fire risk across the country?
I have not run across the need for a Fire Mitigation Plan, but imagine
that some of you have. What suggestions do you have?
Thank you in advance,
Kelly
~~~
Kelly Larson
707-223-3209
Box 18094
Reno, NV 89511
Electrical Engineer
NABCEP Certified
are the advantages and shortcomings
of your device?
Thank you for your response in advance!
Kelly
~~~
Kelly Larson
Electrical Engineer
NABCEP Certified PV Installation Professional™
NABCEP Certified PV Installer Specialist™
NABCEP Certified PV Commissioning & Maintenance Specialist™
IREC Certi
On Nov 6, 2017 10:08 AM, "Kelly Larson" <solarwre...@asis.com> wrote:
>
>> …especially replacement! The inverter weighs in at 185 lbs, so
>> replacement likely will require the use of a crane on multi-story flat
>> roofs.
>>
>> I am in complete agreeme
William
>
>
>
> Lic 773985
> millersolar.com
> 805-438-5600
>
>
> -Original Message-
> From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
> Behalf Of Kelly Larson
> Sent: Thursday, November 02, 2017 12:36 PM
> To: RE-wrenches@lists.r
should know about?
Thanks in advanced for your replies!
Blessings,
Kelly
~
Kelly Larson
707-223-3209
Box 504
Ukiah, CA 95482
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
IREC Certified Master Trainer for Photovoltaic Installer
CA Electrical Contractor# 868189
Hi Jay,
I’ve put it both close to the pump and the array and never noticed any issues.
Blessings,
Kelly
~
Kelly Larson
707-223-3209
Box 504
Ukiah, CA 95482
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
IREC Certified Master Trainer for Photovoltaic Installer
CA
Hi Wrenches,
Can anyone recommend a good structural engineer in the Bay Area?
Blessings,
Kelly
~
Kelly Larson
707-223-3209
Box 504
Ukiah, CA 95482
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
IREC Certified Master Trainer for Photovoltaic Installer
CA Electrical
~
Kelly Larson
707-223-3209
Box 504
Ukiah, CA 95482
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
IREC Certified Master Trainer for Photovoltaic Installer
CA Electrical Contractor# 868189
SolarKelly.com
___
List sponsored
subject.
http://arcflashforum.brainfiller.com/
boB
On 7/11/2014 11:40 AM, Kelly Larson wrote:
Hi all,
I am in need of arc flash training. I expect to be working on some big
commercial and behind the fence systems. What is the best trainers for
arc fault? What should the training
Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 7/11/2014 12:40 PM, Kelly Larson wrote:
Hi all,
I am in need of arc flash training. I expect to be working on some big
commercial and behind the fence systems. What is the best trainers for
arc fault
.
Glenn
From: Kelly Larson
Sent: 7/11/2014 14:40
To: RE-wrenches
Subject: [RE-wrenches] Arc Flash Training
Hi all,
I am in need of arc flash training. I expect to be working on some big
commercial and behind the fence systems. What is the best trainers for arc
fault? What should
I use a toothpick and put a tiny bit in the bolt threads. It's a little less
messy that way.
Blessings,
Kelly
On Feb 6, 2014, at 1:25 PM, Chris Mason wrote:
This is the stuff. Be prepared for it to get everywhere, it's really messy
(or maybe I am).
proven impractical.
Good luck.
William Miller
PS: Speaking of racking systems, did anyone get the news that SnapNRack and
indeed the entire REC Residential juggernaut has been sold? Read the rest
of this story
Wm
On Feb 4, 2014, at 4:45 PM, Kelly Larson solarwre
that there's an enormous fusion reactor
safely banked a few million miles from us. It delivers more than we could
ever use in just about 8 minutes. And it's wireless!
~William McDonough
On Tue, Feb 4, 2014 at 9:58 PM, Kelly Larson solarwre...@asis.com wrote:
Wow, William. Thank
--baFFvHj0TycL7wMKVBZI340LaA==c=-PYi8jywk0XKsL2vpOkRGCzs2UwO52AqIXjyxYLdwi6HgzYpVBBpKQ==ch=UHlwvhDu_eij1qcoWtW5qiGLvNITtkXGLCqG4RSjo4k9OQWUYTpu8w==
Wm
On Feb 4, 2014, at 4:45 PM, Kelly Larson solarwre...@asis.com
mailto:solarwre...@asis.com wrote:
Thanks, Aaron. How are you handling wire management
Hi,
We are looking to install some 4KW ground mounted arrays. What racking are you
using? Best ground connection? Wire management? The shows have so many
choices, and I keep doing the same ol thing...
Blessings,
Kelly
Kelly Larson
Electrical Engineer
NABCEP Certified Solar PV Installation
Thanks for your reply, Jerry. How do you attach them to the ground? Concrete?
Driven?
Blessings,
Kelly
On Feb 4, 2014, at 3:30 PM, Jerry Shafer wrote:
We use unirac ULA good engineering not much on wire management
Jerry
On Feb 4, 2014 2:29 PM, Kelly Larson solarwre...@asis.com wrote
Great. Many thanks, Jerry!
On Feb 4, 2014, at 3:39 PM, Jerry Shafer wrote:
We use holes with concrete for a small array its less expensive
On Feb 4, 2014 3:37 PM, Kelly Larson solarwre...@asis.com wrote:
Thanks for your reply, Jerry. How do you attach them to the ground?
Concrete
the news that SnapNRack and
indeed the entire REC Residential juggernaut has been sold? Read the rest of
this story
Wm
On Feb 4, 2014, at 4:45 PM, Kelly Larson solarwre...@asis.com wrote:
Thanks, Aaron. How are you handling wire management and connection to the
ground
Hi Marco,
I am pretty sure that being double insulated is part of the definition of PV
Wire.
Blessings,
Kelly
On Sep 27, 2013, at 10:27 AM, Marco Mangelsdorf wrote:
Thanks, August.
OK, so I’ve found “PV wire” that’s double-insulated. (See attached spec
sheet from Falcon wire.)
Is
Even though they say Photovoltaic in the spec sheet, I am not sure that this
is PV Wire. I don't see anywhere that it actually uses those exact words,
and that is the designation in the NEC.
Blessings,
Kelly
On Sep 27, 2013, at 10:38 AM, August Goers wrote:
Marco,
Yes, there is single
error. Red, (or some other
color other than white, grey, green, bare, or green with yellow stripe), would
be NEC compliant.
Blessings,
Kelly
Kelly Larson
707-223-3209
Box 504
Ukiah, CA 95482
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
ISPQ Master Trainer
CA
of the batteries!
Blessings,
Kelly
Kelly Larson
707-223-3209
Box 504
Ukiah, CA 95482
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
ISPQ Master Trainer
CA Electrical Contractor# 868189
SolarKelly.com
I'd put my money on the sun and solar energy. What a source of power
I've got several customers with them. I recently changed one from a 12V to 24V
system. I called and got right through to a tech. (Turns out you don't need
to change the light bulb - they use a 24V one for all 12/24V models.)
Blessings,
Kelly
On Sep 13, 2013, at 7:13 AM, Chris Daum wrote:
Hi Benn,
It's around 200W per square meter.
Blessings,
Kelly
Kelly Larson
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
ISPQ Master Trainer
CA Electrical Contractor# 868189
SolarKelly.com
On Sep 5, 2013, at 9:06 AM, Benn At DayStarSolar wrote:
Wrenches,
I was asked
.
Not that I don't believe you, but can you provide any data to back this up?
I should have asked for that upfront.
benn
Sent from a 'smart' phone, with touch screen keys. Please excuse shortcuts
and typos.
On 2013-09-05, at 10:24 AM, Kelly Larson solarwre...@asis.com wrote:
Hi Benn
Hi Jeremy,
FYI: I heard that Fronius is the most sensitive of the GT inverters and so the
most difficult to fool or keep on in an AC coupled system. That was from the
Magnum AC Coupling webinar.
Blessings,
Kelly
Kelly Larson
Electrical Engineer
NABCEP Certified Solar PV Installation
to the one on the inverter. The reset is on the lower left
of the display. You lose your settings but it's always brought back the
bottom line to be able to see what you're doing.
Bill
FRS_working_logo.jpg
- Original Message -
From: Kelly Larson
To: RE-wrenches@lists.re
.
3209 Richards Lane (note new address)
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com
On 5/23/2013 12:55 PM, Kelly Larson wrote:
Thanks, Bill. That is what they have been doing, but then they loose their
setpoints... The camp is 1 1/2 hours from me and needs more
to reliably get to the settings.
Anyone know about this problem? Have a ICM remote for sale?
Blessings,
Kelly
Kelly Larson
Box 504
Ukiah, CA 95482
707-223-3209
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
ISPQ Master Trainer
CA Electrical Contractor# 868189
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Kelly Larson
Sent: Wednesday, May 22, 2013 8:14 AM
To: RE-wrenches@lists.re-wrenches.org
Subject: [RE-wrenches] Xantrex SW Plus ICM Remote anyone?
Hello,
I have an off-grid
-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Kelly Larson
Sent: Wednesday, May 22, 2013 8:34 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Xantrex SW Plus ICM Remote anyone?
Thank you, Brian. Am I calling what I am looking for by the right name?
Blessings,
Kelly
On May 22, 2013
The light by the inverter is the only DC appliance I routinely recommend
nowadays in off grid homes and businesses, unless they have no backup
generator. If no backup, every electron counts, and there are some DC
appliances, in that case, that can be worth the price and fuss.
Blessings,
Kelly
If you're in Sebastopol you could ask Paul Hernday at Solmetric if the PVA
would help.
Blessings,
Kelly
On Nov 26, 2012, at 4:55 PM, Robert Nuese wrote:
Dear Wrenches
I've been experiencing a troubleshooting problem that you may be able to
help me with. Or, can anyone refer me to
Dear esteemed wrenches,
I am working for a school who were donated several SolAir wind turbines. I am
trying to figure out if they work. Anyone have any experience with them?
By the swept area they are likely 250W machines, (even though they were sold as
1.6KW). I am just wondering if they
from the Heliosentry
box. The modules seem to be performing well, although the system isn't
connected to the internet, and I am not sure how the monitoring works when it
is. (That is something I'd like to know more about before installing another
system.)
Blessings,
Kelly Larson
On Oct
Hi Rebecca,
If you suspect the wires in conduit, you can megger just the wires by
disconnecting all the wires on both ends of the conduit, wirenutting them off
on one end, and meggering them on the other end. Megger between two of the
wires at a time, and repeat until all the wires have been
with it! Have flyers that list resources for
energy efficiency and energy conservation, as well as renewables. I'd
love to have a meter with a big readout that says how much power is
being used with a running total of energy. Project for the future...
Blessings,
Kelly
Kelly Larson
NABCEP
battery backup, where the genny will back off when the
batteries are full-ish.
Blessings,
Kelly
Kelly Larson
Electrical Engineer
NABCEP Certified Solar PV Installer
ISPQ Master Trainer
CA C-10 # 868189
solarke...@asis.com
On Apr 30, 2011, at 4:35 PM, Carl Emerson wrote:
Great discussion.
Why
There are new j- and combiner boxes out from Tyco that have panel
mount connectors.
Blessings,
Kelly
Kelly Larson
Electrical Engineer
NABCEP Certified Solar PV Installer
ISPQ Master Trainer
CA C-10 # 868189
solarke...@asis.com
On Apr 29, 2011, at 12:12 PM, R Ray Walters wrote:
Midnite
Fellow wrenches,
Thought this announcement might be of interest to you. (If for no
other reason, the participant descriptions are invoking...)
Blessings,
Kelly
Kelly Larson
Box 104
Piercy, CA 95587
707-223-3209
Electrical Engineer
NABCEP Certified Solar PV Installer
ISPQ Master Trainer
CA
Hi Mark,
I don't know if they are still available, but the 2011 code book I
bought had a free PDF download card in it.
Blessings,
Kelly
Kelly Larson
Box 104
Piercy, CA 95587
707-223-3209
Electrical Engineer
NABCEP Certified Solar PV Installer
ISPQ Master Trainer
CA C-10 # 868189
solarke
Here is the link for the report from Solar ABCs. Don't know if you
can get to the webinar anymore, though.
http://solarabcs.org/index.php?option=com_contentview=articleid=97%3A2011-national-electrical-code-nec-and-handbook-availablecatid=1%3Alatest-newsItemid=1
Blessings,
Kelly
Kelly Larson
system and happy customer.
Blessings,
Kelly
Kelly Larson
Box 104
Piercy, CA 95587
707-223-3209
Electrical Engineer
NABCEP Certified Solar PV Installer
ISPQ Master Trainer
CA C-10 # 868189
solarke...@asis.com
I'd put my money on the sun and solar energy. What a source of
power! I hope we don't
Done this too. Ended up not trusting the grounding on it and running
lay in lugs. It is hard to ground the pans, as they are thin metal.
I used a bolt/nut with a lay in lug with some sucess, (under the
cap). #6 bare used here too.
Blessings,
Kelly
Kelly Larson
Box 104
Piercy, CA 95587
Hi Matt,
I recently asked an expert where arc flash would be an issue for PV
installers. The answer was: not much threat on DC side, because of
(relatively) low power, on the AC side, it's the 480V enclosures.
Blessings,
Kelly
Kelly Larson, Electrical Engineer
Box 104
Piercy, CA 95587
50 matches
Mail list logo