Try sun electronics in Miami. sunelec.com
Kurt Johnsen
Kurt Johnsen Energy Systems
352-222-9495
On Mon, Apr 17, 2017 at 5:24 PM, Dan Fink <danbo...@gmail.com> wrote:
> Greetings Wrenches;
>
> Not the first time I've been asked this question; I can often find homes
> for sma
Jay,
There is the consideration of voiding any engineering that is being relied
on for your protection. If there is a failure telling the judge that you
followed the homeowners instructions is not going to get you off the hook.
Kurt
Kurt Johnsen Energy Systems
On Wed, Jan 27, 2016 at 9:43 AM
wolfgang.beaugr...@magesolar.com
Kurt Johnsen
On Thu, Oct 22, 2015 at 8:52 PM, Carl Adams <swingjun...@gmail.com> wrote:
> Hello Fellow wrenches,
>
> I have a couple of failed Mage solar AC modules. These are Mage Solar
> panels with an integrated Solardridge inverter.
at not voiding a roofing warranty that they may have.
Kurt Johnsen
Kurt Johnsen Energy Systems
NABCEP Certified PV Installer
621 SW 26th Place Gainesville, FL 32601
352-222-9495
On Sat, Aug 29, 2015 at 1:11 PM, Ray Walters r...@solarray.com wrote:
Excellent point, sir. I have looked at quite
. Perhaps an experienced roofer weigh in on this.
Kurt Johnsen
On Fri, Aug 7, 2015 at 3:21 PM, Jason Szumlanski
ja...@floridasolardesigngroup.com wrote:
If you place a flat object on top of roofing without an uphill material
lapping over the downhill object, you are not flashing
Thank you everyone for all of the great responses on anti-seize methods!
Kurt Johnsen
On Mon, Jun 29, 2015 at 3:00 PM, Starlight Solar Power Systems
la...@starlightsolar.com wrote:
You can use a thin sponge soaked anti-seize and just touch the threads to
the sponge. Since it only takes
the right thing to do, using torque wrenches
helps avoid assuming unnecessary financial risk which my thin margins
cannot afford.
Kurt Johnsen
On Sun, Jun 28, 2015 at 5:27 PM, Ray Walters r...@solarray.com wrote:
Besides your note that cordless impact drivers can over torque the
clamps, also
Should you decide to lower your plumbing vents I have found an inside pipe
cutter to be an inexpensive and handy tool. Cut the vent and lead off an
inch above your desired pipe height and use the inside cutter to cut the
pvc pipe. Go slow and be careful to keep air space between the pvc and lead
sunelec.com in Miami usually has pretty good pricing on the XW 6048s.
On Wed, Jun 11, 2014 at 11:43 PM, Exeltech exelt...@yahoo.com wrote:
Wrenches,
A friend of mine experienced the destruction of major parts of his system
in a recent lightning storm. Everything was extensively grounded
No problem. Tough love for the painter.
On Sun, Jun 8, 2014 at 5:05 PM, Louis Woofenden lo...@woofenden.net wrote:
Thanks Kurt!
Looks like the manufacturer is fine with any mild cleaner. We'll let the
painter have the fun!
Cheers,
Louis
On 6/8/14, 9:48 AM, Kurt Johnsen wrote
Latex paint can be removed with alcohol. Probably a rag damped with it
would do the trick. It evaporates quickly. Still better check with
manufacturer 1st.
kurt
On Thu, Jun 5, 2014 at 12:30 AM, Benn Kilburn b...@skyfireenergy.com
wrote:
The painter's elbow grease, of course.
benn
On Jun
11 matches
Mail list logo
