.com <http://www.solarwindworks.com/>
ch...@solarwindworks.com
"Proven Energy Solutions"
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Ray Walters
Sent: Monday, February 18, 2013 10:42 AM
To: RE-wrenches
Subject: Re: [RE-wrenches]
The Simpson screws look very similar to the Headloks. I just looked at
the Simpson SDS, and I see they are available in 316 Stainless as well.
That would be my choice near the ocean, but I'm guessing they're spendy.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified, Licensed Contractor
808 269-
Ray:
We use the Simpson 1/4 by X" "Strong Drive" (SDS series). We get them in
the hot dip galvanize version. They are readily available locally. I
think building officials like the Simpson name on structural
products. They self drill and we have had no instance of them snapping off
while
I've got a project right now on a steel roof. I was just at a trade
show last week, so I got to look at the latest gizmo from S5.
I didn't like it at all, it didn't go into the valleys like the old
mount, but drilled 4 holes into the side of the ridge, and just counted
on the roofing to hold th
Chris:
We have used the S5 corrugated product before and choose not to repeat the
experiment for these reasons:
1. Making roof perforations in any valley defies common sense.
2. The threaded mounting holes stripped very easily.
3. I have determined that most common wavelength of corrugated r
aybe find original building drawings or a sticker somewhere on
> the underside? I’ve also found that the folks at S-5! are good at figuring
> out manufacturers.
>
> Good luck! -August
>
>
>
> *From:* William Miller
> *Sent:* February 15, 2013 6:49 PM
> *To:* RE-wrenc
:* RE-wrenches
*Subject:* [RE-wrenches] Corrugated roofing mounts
Friends:
I am trying to specify attachments for a corrugated roof. This is the type
with the sine wave shape.
I want to try the DPW CMB product line. I have been instructed to provide
measurements of the corrugation from peak to
nt: Friday, February 15, 2013 6:47 PM
Subject: [RE-wrenches] Corrugated roofing mounts
Friends:
I am trying to specify attachments for a corrugated roof. This is the type
with the sine wave shape.
I want to try the DPW CMB product line. I have been instructed to provide
measurements of the corrug
Friends:
I am trying to specify attachments for a corrugated roof. This is the type
with the sine wave shape.
I want to try the DPW CMB product line. I have been instructed to provide
measurements of the corrugation from peak to peak and also the height from
valley to peak. The problem is
9 matches
Mail list logo