guys!
Eric Stikes
SunHarvest
- Original Message -
From: William Miller
To: RE-wrenches
Sent: Monday, March 25, 2013 12:41 PM
Subject: Re: [RE-wrenches] GSCM-mini with Honda EM5000SX
Eric:
The generator-based charging may impose higher currents into the batteries
than either
. Ever heard of this before?
Eric Stikes
SunHarvest Solar
- Original Message -
From: Larry Crutcher,Starlight Solar Power Systems
To: RE-wrenches
Sent: Friday, March 01, 2013 11:48 AM
Subject: Re: [RE-wrenches] GSCM-mini with Honda EM5000SX
You need the line and neutral from
when i have seen this (battery post melting) in the past it was from a faulty
(high resistance) battery connection... usually a poorly crimped lug.
todd
On Monday, March 25, 2013 9:15am, SunHarvest e...@harvesthesun.com said:
Larry,
Thanks for your reply. For some reason the
-wrenches-boun...@lists.re-wrenches.org] On Behalf Of SunHarvest
Sent: Monday, March 25, 2013 9:15 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] GSCM-mini with Honda EM5000SX
Larry,
Thanks for your reply. For some reason the schematic I received from the
tech at Atkinson did not show any wires
Eric:
The generator-based charging may impose higher currents into the batteries
than either PV charging or inverter consumption, triggering the problem.
Melted battery terminals are not uncommon. You must have washers under
your bolt heads with lead flanges. Otherwise the bolt heads sink
-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William Miller
Sent: Monday, March 25, 2013 12:41 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] GSCM-mini with Honda EM5000SX
Eric:
The generator-based charging may impose higher currents
You need the line and neutral from the generator connected to pin 9 10 or the
GSCM does not know if the generator is running or not.
Larry Crutcher
Starlight Solar Power Systems
On Mar 1, 2013, at 10:30 AM, SunHarvest wrote:
I've installed a GSCM-mini (interfaced with a Honda EM500SX
Eric~ On the same control box that I re-examined just today:
Terminals 9 10 on the GCSM-mini need to see the generator's AC output in
order for the black box to know it's time to stop cranking the starter. The
wiring diagram that you sent shows those terminals but doesn't show
anything connected
8 matches
Mail list logo