New inverter installed followed by new washer. Old Trace SW didn't have
issues, but didn't have the washer either. I suspect it wouldn't have
operated at all on the Trace.
Ray Walters
Remote Solar
303 505-8760
On 9/21/19 3:29 PM, Jay wrote:
Hi Ray
What’s the timeline here.
New washer? All
May I suggest getting a couple high quality LED bulbs. CREE and other brands
have a high Power Factor. The intermittent power factor swings of the washer
may be jacking with the PF of the cheap bulbs.
Thank you,
Maverick
> On Sep 21, 2019, at 1:44 PM, Ray wrote:
>
> Greetings Esteemed
Hi Ray
What’s the timeline here.
New washer? All worked before?
Or totally new system?
Jay
> On Sep 21, 2019, at 1:01 PM, Ray wrote:
>
> No error codes, just light flickering with the washing action. Its a Magnum
> MS 4448 PAE, 48 v 845 AH of HUP batteries, 2/0 cables. Happens day or
I have seen this with the dimmer below 50% with well/transfer pumps. I
only use the costco FEIT bulbs/CREE and no issues on XW and CSW. Avoid
dimmers or use less than 30% of dimming. I don't think the bulb being
dimmable is the issue either. It is more apparent at night when you dim an
LED. Tell
I”ve got a old VFX and all LED’s of many different brands. I don’t have any
flicker regardless of what’s on:
HE washer, refrigerator, blender etc.
Except with the dimmer, which can do it if it’s on a lower setting.
I only use CREE LED with dimmers as they are dimmer agnostic.
If its
I've noticed this is worse with multiple bulbs in one fixture, and it is
even slightly noticeable on grid power, but worse on inverter power. I
first saw this with CFL's also, but not as bad as with the LED's. And this
is without any motor loads going. It's not consistent either, sometimes it
does
No error codes, just light flickering with the washing action. Its a
Magnum MS 4448 PAE, 48 v 845 AH of HUP batteries, 2/0 cables. Happens
day or night. Also the lights are not on a dimmer, just a regular
switch. It happens to the LEDs all over the house. They are the
Econolight brand from
Ray
A few questions, do you see a code, what size is the inverter, batteries,
cables, day or night operation.
Jerry
On Sat, Sep 21, 2019, 11:45 AM Ray wrote:
> Greetings Esteemed Wrenches;
>
> We have a customer with a new high efficiency washer running on a Magnum
> inverter. When it is in
Ray,
I had a very similar issue a while back. The root cause turned out to be
the dimming switch and related LED bulbs. Instant fix.
Hope this helps.
-Chris
On Sat, Sep 21, 2019 at 2:45 PM Ray wrote:
> Greetings Esteemed Wrenches;
>
> We have a customer with a new high efficiency washer
Greetings Esteemed Wrenches;
We have a customer with a new high efficiency washer running on a Magnum
inverter. When it is in wash cycle, the LED lights flicker rhythmically
with its operation. We can see a corresponding distortion of the wave
form on an oscilloscope, but RMS voltage is
10 matches
Mail list logo
