ll Free 866-724-3444
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Kirk
Herander, VSE
Sent: Saturday, December 20, 2008 4:22 AM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] SS Zip Ties alternat
M
To: re-wrenches@lists.re-wrenches.org
Subject: Re: [RE-wrenches] SS Zip Ties
Tump,
Interesting. No AHJ on my job in NH. Just trying to comply with the intent
of
the code and common sense.
Next time, with the same AHJ, you might try using plumber's CVPS DWV pipe,
it's
not conduit :-
gt;
> -Original Message-
> From: re-wrenches-boun...@lists.re-wrenches.org
> [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Richard L
> Ratico
> Sent: Monday, December 15, 2008 10:55 PM
> To: re-wrenches@lists.re-wrenches.org
> Subject: Re: [RE-wrenche
:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Richard L
Ratico
Sent: Monday, December 15, 2008 10:55 PM
To: re-wrenches@lists.re-wrenches.org
Subject: Re: [RE-wrenches] SS Zip Ties
Fellow Wrenches,
For MC cable "management", we recently used 1 1/4" Schedule 40 PVC condui
m: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Richard L
Ratico
Sent: Monday, December 15, 2008 10:55 PM
To: re-wrenches@lists.re-wrenches.org
Subject: Re: [RE-wrenches] SS Zip Ties
Fellow Wrenches,
For MC cable "management&
clips can't work.
Bill.
-Original Message-
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Chris
Worcester
Sent: Friday, December 12, 2008 10:08 AM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] SS zip
.@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris
Worcester
Sent: Friday, December 12, 2008 10:08 AM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] SS zip ties
Hi all,
We have slowly evolved into using SS hose clamps with 3/4" double wall 600V
ter, Village Power Design
Sent: Thursday, December 11, 2008 6:31 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] SS zip ties
Hi Bill and all,
I've been searching for an alternative to plastic wire ties for some
time as I'm not sure they are going to hold up over the system life
of 20-30+
ng them too tight.
Bill.
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William
Miller
Sent: Wednesday, December 10, 2008 9:52 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] SS zip ties
Kent:
To tighten: 1.
95959
(530) 401-8024
www.berkeleysolar.com
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bill Brooks
Sent: Thursday, December 11, 2008 5:53 PM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] SS zip ties
Folks,
I'
Behalf Of
William
Miller
Sent: Wednesday, December 10, 2008 9:52 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] SS zip ties
Kent:
To tighten: 1. Pull tie snug by hand. 2. Cut tail about 20 mm from
clasp. 3. Roll tail with needle-nose pliers, like a sardine can
lid. This
tightens tie
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William
Miller
Sent: Wednesday, December 10, 2008 9:52 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] SS zip ties
Kent:
To tighten: 1. Pull tie snug by hand. 2. Cut tail about 20 mm fr
Kent:
To tighten: 1. Pull tie snug by hand. 2. Cut tail about 20 mm from
clasp. 3. Roll tail with needle-nose pliers, like a sardine can lid. This
tightens tie and hides sharp end.
See
http://mpandc.com/practices/Technical_Procedures/PV_wiring/PV_wiring.html
for photos.
Do not over-ti
Fastenal has stainless ties is various lengths
http://www.fastenal.com/web/products/detail.ex?sku=0710242
For those that haven't used these before, beware that it is difficult to
tighten them.
Kent Osterberg
Blue Mountain Solar
___
List sponsored b
Jay:
Waytekwire.com
William
At 04:15 PM 12/10/2008, you wrote:
Where do you get these SS zip ties.
I have seen them and think they would work in some applications.
thanks,
jay
peltz power
___
___
L
D]
www.ntrei.com
***
- Original Message -
From: "jay peltz" <[EMAIL PROTECTED]>
To: "RE-wrenches"
Sent: Wednesday, December 10, 2008 6:15 PM
Subject: [RE-wrenches] SS zip ties
Where do you get these SS zip ties.
I have seen them and think they would work
Where do you get these SS zip ties.
I have seen them and think they would work in some applications.
thanks,
jay
peltz power
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.
17 matches
Mail list logo
