Re: [RE-wrenches] seeking PV mounting advice to Shipping Container for Off-grid

I have done this and if you dont want y holes use unistrut and have it welded to the roof deck edges and from the channel nuts and up you go Jerry On Mon, Sep 23, 2019, 6:12 AM Chris Schaefer wrote: > G'Day All, > > I'm looking for anyone with advice that has mounted PV to a > shipping

Re: [RE-wrenches] seeking PV mounting advice to Shipping Container for Off-grid

I have a bunch of containers, I put solar on a couple. I would weld tabs onto the container so as to avoid penetrations. The worst thing about containers is they leak, so holes in the top are a problem. In fact, I would weld on tabs, put galvanized stringers cross at an angle, put galvanized

Re: [RE-wrenches] seeking PV mounting advice to Shipping Container for Off-grid

Check this company out. They have a pretty slick solution. On Mon, Sep 23, 2019 at 6:12 AM Chris Schaefer wrote: > G'Day All, > > I'm looking for anyone with advice that has mounted PV to a > shipping container roof with minimal to no roof penetrations. The container >

[RE-wrenches] seeking PV mounting advice to Shipping Container for Off-grid

G'Day All, I'm looking for anyone with advice that has mounted PV to a shipping container roof with minimal to no roof penetrations. The container will not be required to be transported with PV attached, only the racking and only one time to project site. They will not be mounted flat but prefer