On Thu, 2003-06-19 at 06:24, Ian Mortimer wrote:
You can do this from the installer (in graphical mode). Set up your
raid array first - then create the lvm on top of that - then partition
the lvm.
What about existing systems that have RH already installed -- is it
possible to add RAID
What about existing systems that have RH already installed -- is it
possible to add RAID afterwards if I just get the extra disks? If it
possible, has anyone documented this procoess
It's possible but messy:
create the RAID system on the new disk(s)
configure the RAID system to run in
I have a little project coming up. A LUG member has asked me to do a RH
9 install on an HP lpr rack mount with 2 18GB scsi drives that will
installed in a remote colocation site and be hosting a dozen small
websites. The guy wants to use software raid0 to mirror the drives and
I like to use LVM
On Wed, 18 Jun 2003, Bret Hughes wrote:
I have a little project coming up. A LUG member has asked me to do a RH
9 install on an HP lpr rack mount with 2 18GB scsi drives that will
installed in a remote colocation site and be hosting a dozen small
websites. The guy wants to use software
The guy wants to use software raid0 to mirror the drives and
I like to use LVM on stuff that might grow.
There'd be no point in having lvm and raid0 on the same drives.
To get mirroring you'd want raid1 or raid5.
You can do this from the installer (in graphical mode). Set up your
raid array