Hi,
In response to various questions on getting CD Witers to work with Linux, I
used this source and it helped tremendously:
http://linux.com/howto/CD-Writing-HOWTO-1.html
HTH,
Cindy
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.r
>
> I did not mean for my message to sound quite as sharp as it came out -
> sorry. In my experience, the howto's are often a source of confusion,
> especially with regards to CDRW under Redhat. What is really needed is a
> Redhat specific howto, and that should really be something that Redhat
> p
lee wrote:
> there I go again quoting those howto's :) lol
> no seriously thats exactly right thanks for correcting that..up too late i knew
> better... sorry about that gent whom i was addressing.. :)
I did not mean for my message to sound quite as sharp as it came out -
sorry. In my exp
>
> >
> > ALSO:
> > you must insert the following into /etc/profile ( starting with test and
> > ending with cdrecord -scanbus )
>
>
> This is not required, and I would not suggest doing it. All this is
> doing is attempting to load a bunch of modules, and if you have compiled
> them into the ker
Lee wrote:
> ...
> just make sure you've got the scsi emulation etc. settings to Y as the howto
> suggests..
>
> ALSO:
> you must insert the following into /etc/profile ( starting with test and
> ending with cdrecord -scanbus )
> -
>
> test `whoami` = 'root' |
> I'm trying to get my IDE CD burner working using cdrecord, and as usual, not
> as simple as the documentation suggests. The first step is to type
> 'cdrecord -scanbus' and figure out what the device, LUN, etc. is, but when I
> do it it just says
> "No such file or directory. Cannot open SCSI dri
John Blackmore wrote:
> I'm trying to get my IDE CD burner working using cdrecord, and as usual, not
> as simple as the documentation suggests. The first step is to type
> 'cdrecord -scanbus' and figure out what the device, LUN, etc. is, but when I
> do it it just says
> "No such file or director
> "jb" == John Blackmore <[EMAIL PROTECTED]> writes:
jb> I'm trying to get my IDE CD burner working using cdrecord, and as usual, not
jb> as simple as the documentation suggests. The first step is to type
jb> 'cdrecord -scanbus' and figure out what the device, LUN, etc. is, but when I
jb> do
I'm trying to get my IDE CD burner working using cdrecord, and as usual, not
as simple as the documentation suggests. The first step is to type
'cdrecord -scanbus' and figure out what the device, LUN, etc. is, but when I
do it it just says
"No such file or directory. Cannot open SCSI driver".
How
