PROTECTED]]
Sent: Wednesday, January 08, 2003 2:33 PM
To: [EMAIL PROTECTED]
Subject: Re: eth0 is not bringing up
On 06-Jan-2003/18:07 +0530, gihas [EMAIL PROTECTED] wrote:
I installed linux 7.2 and while installing time it is asking IP address and
I
configured properlly.But while system booting time
Tan, Julien wrote:
alias eth2 t3g
alias eth3 t3g
Shouldn't that be tg3? Not t3g?
-Ben.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
Tan, Julien wrote:
Hi anthony,
mee too hainving the same problem with the same version installed on
Compaq DL360. Well here is that is says in the modules.conf
alias parport_lowlevel parport_pc
alias eth0 eepro100
alias eth1 eepro100
alias scsi_hostadapter cciss
alias eth2 t3g
alias eth3 t3g
://unix.pg.patch.intel.com/index.asp
*Any doubt please call.
-Original Message-
From: Ben Russo [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 09, 2003 2:56 AM
To: [EMAIL PROTECTED]
Subject: Re: eth0 is not bringing up
Tan, Julien wrote:
Hi anthony,
mee too hainving the same
Tan, Julien wrote:
hi Ben,
so what should i do now ..please advise. All the cards comes default
with the machines.
The tg3 driver module is an open source driver for the Broadcom Gig
NIC's and some 3com Nics as well.
The bcm5700 is a binary driver that broadcom provides.
I think that by
On 06-Jan-2003/18:07 +0530, gihas [EMAIL PROTECTED] wrote:
I installed linux 7.2 and while installing time it is asking IP address and I
configured properlly.But while system booting time it is showing
eth0 is failed.Because of that I am not able to connect to internet.
Can u suggest some
Hai,
I installed linux 7.2 and while installing time it
is asking IP address and I
configured properlly.But while system booting time
it is showing
eth0 is failed.Because of that I am not able
to connect to internet.
Can u suggest some solution for that.
Regards
gihas.
Hai,
I installed linux 7.2 and while installing time it is asking IP address and
I
configured properlly.But while system booting time it is showing
eth0 is failed.Because of that I am not able to connect to internet.
Can u suggest some solution for that.
Regards
gihas.
---
What values did
Gihas:
My name is Tony Caskey. I am rather new to Linux, but if your ethernet card
is attached to an ADSL modem, perhaps I can help you. With the help of a
Mr. Neil Ablong of the Philipines, I figured out how to get eth0 and pppOe
going not long ago.
For the ethernet device, I set it up to