Nicholas wrote:
Hi folks :
Could anybody show me on how to guide me here in step by
step
configuring my system with raid controller here?
Keep in mind the raid controller in question is not really a raid
controller. It's an ide controller with a few bios features to build an
Hi folks :
Could anybody show me on how to guide me here in step by step
configuring my system with raid controller here?
1st problem :
I am using a intel 845wd1 motherboard with 2 maxtor 60 gig hard disk
i plan to mirror the OS + 40 gig data from hd 1(hde) to hd (hdg),
i have t
I usually see this after compiling the kernel without running LILO. A
bootdisk running GRUB should work fine to fix this. If it's the 1024
problem, I think after booting you can add an option to lilo.conf and
rerun lilo.
Or you could just keep the bootloader on a floppy permanently.
Jon
On S
On 07/27/02 12:11 -0400, Matthew Scarrow wrote:
> I have setup RedHat 7.2 on a Promise RAID controller.
>
> When I reboot for the first time I get LI and that's it. Anyone got
> suggestions on what's wrong. Thanks.
Check and see, but most likely your boot partition is located above
cylinder 1024
I have setup RedHat 7.2 on a Promise RAID controller.
When I reboot for the first time I get LI and that's it. Anyone got
suggestions on what's wrong. Thanks.
Matthew Scarrow
ComIT Solutions Inc.
www.comit.ca
Phone: 519-442-0100
Fax: 519-442-0429
__
