Hi
The vidio ram is in fact taken from the
main memory, causing the 121M. One can set the amount of ram provided to
the video card down to 2 megabyte.
If we have gotten hold of a good technition over the phone,
we would not have taken the board in for testing. It was fine, but the
manual does not
Thanks,
I'll try that if they find the board to be ok.
regards, Willem
On Thu, 13 Feb 2003, Edward Dekkers wrote:
> > Hi,
> > I thought there are too many problems with rh 8.0 and
> > decided to wait for 8.1.
> > We are now taking the board to the distributor for testing.
> > The 121 mb ram is sh
> Hi,
> I thought there are too many problems with rh 8.0 and
> decided to wait for 8.1.
> We are now taking the board to the distributor for testing.
> The 121 mb ram is shown as the box tests the memory before boot.
> It shows the vidio ram sepperatly so i do not think it is that.
> thanks anyway
u are using 7.3?
>
> -Original Message-
> From: Willem van der Walt<[EMAIL PROTECTED]>
> [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 12, 2003 1:33 PM
> To: [EMAIL PROTECTED]
> Subject: rh 7x install hangs on MS-6368 motherboard
>
>
> I am tryin
<[EMAIL PROTECTED]>
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 12, 2003 1:33 PM
To: [EMAIL PROTECTED]
Subject: rh 7x install hangs on MS-6368 motherboard
I am trying to install rh 7.3 on this board.
Also tryed 7.2 both hangs.
7.3 goes fine until it asks for the second cd and then han
I am trying to install rh 7.3 on this board.
Also tryed 7.2 both hangs.
7.3 goes fine until it asks for the second cd and then hangs.
On 7.2 it does not always hang on the same place.
Does any one have this board and had the same problem?
What did you do?
The ram shows as 121 mb not 128 mb as it sh
