Re: [Repeater-Builder] Just a couple of dB loss you say?

So, when you're down 20 dB it's time to refill the coffee cup? Chuck WB2EDV - Original Message - From: "Neil McKie" <[EMAIL PROTECTED]> Sent: Friday, July 16, 2004 12:16 PM Subject: [Repeater-Builder] Just a couple of dB loss you say? > >The following is from a coffee cup I >

Re: [Repeater-Builder] Just a couple of dB loss you say?

That's a good start ... Neil - WA6KLA Chuck Kelsey wrote: > > So, when you're down 20 dB it's time to refill the coffee cup? > > Chuck > WB2EDV > > - Original Message - > From: "Neil McKie" <[EMAIL PROTECTED]> > Sent: Friday, July 16, 2004 12:16 PM > Subject: [Repeater-Builder]

Re: [Repeater-Builder] Just a couple of dB loss you say?

At 10:48 AM 7/16/2004 -0700, you wrote: > > I know, now you want my study of the tone frequency comparisons > of the Bell System Touch-Tone plan? <---Naaah. Dual tones went out with 62 Nash Ramblers :-) Ken -- Presiden

Re: [Repeater-Builder] Just a couple of dB loss you say?

If the dual tones went away. how do you remotely control your system via radio? Neil Ken Arck wrote: > > At 10:48 AM 7/16/2004 -0700, you wrote: > > > > I know, now you want my study of the tone frequency comparisons > > of the Bell System Touch-Tone plan? > > <---Naaah. Dual tones we

[Repeater-Builder] Need tuning instructions for Celwave preselector

Looking for tuning instructions and/or information on a Celwave model HFD8461A preselector-thingy-do-bob - any help would be appreciated. Direct replies are encouraged. Thanks. - Adam - Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.

[Repeater-Builder] Mitrek Local audio

I have a UHF Mitrek 30 watt radio that was removed from a consolette and has been converted for repeater use. All is working FB except for local Rx. audio only hear weak "pop" in speaker when keyed. I am using the same setup with another radio and all works OK. Even the squelch control works c

Re: [Repeater-Builder] Just a couple of dB loss you say?

I was wondering how he "dialed" his phone. Chuck WB2EDV - Original Message - From: "Neil McKie" <[EMAIL PROTECTED]> To: Sent: Saturday, July 17, 2004 8:07 AM Subject: Re: [Repeater-Builder] Just a couple of dB loss you say? > > If the dual tones went away. how do you remotely con

Re: [Repeater-Builder] Just a couple of dB loss you say?

At 05:07 AM 7/17/2004 -0700, you wrote: > > If the dual tones went away. how do you remotely control your > system via radio? <---I didn't say they weren't useful (or still used). I just said they were outdated Ken --

Re: [Repeater-Builder] Need tuning instructions for Celwave preselector

Adam, Although the preselector is manufactured by RFS/Celwave, HFD8461A is a Motorola part number. This preselector is intended to be used in the GR1225 and similar repeaters in the 144-160 MHz band. It appears to be similar to a Celwave 911-PB4-1-2 unit, except that it has N connectors. It may

[Repeater-Builder] List operation

I have a few questions about the mechanics of operating a list such as this. Could one of the moderators email me direct if you're willing to answer some? Thanks a bunch. 73, Roger Grady K9OPO Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/gro

Re: [Repeater-Builder] Just a couple of dB loss you say?

Greetings, "Nit-Pickers" Back in 1965 the Buffalo repeater WB2TLJ and the Toronto repeater VE3RPT used "secode" tonesa single tone interupted by a standard telephone dial to "remote control" the repeater. This was prior to using DTMF (Touch-Tone) VE3KSR in Kitchener, Ont was among the very