I just received a Remote Tone Adapter built by Cetac Vega. I have
checked their web site and found nothing on this unit. I can found
this on the curcuit board: Cetec Vega 065-0338E on the back side
and this on the front side: ASSY. 011-0013 REV and also found this:
ASSY. 011-0014 REV. No model
You must have gotten some of our USFS surplus MT-2 racks. These are rock
bound.
I have the books at work but if I remember right the VR-2 will go into
the ham bands with just a new
rock and re-tune. The VT-2 will go but there a some caps that need to be
changed.
I will take a look on Monday to
Hi I am looking at some used Daniels repeater equipment. These are
the older VT-2 and VR-2 VHF modules. Currently on 169 mhz. Can
someone tell me are these the crystal versions? What is the actual
freq range of these modules? Are there different board versions/parts
changes in each bands version
Hello, Im looking for the pinouts and
functions of the wiring on the CTN34 Tone board and the dip switch setting.
These tone boards are used in the RP70U desktop repeater and many other HT and
mobiles from the same era..
i do know that the following are(if im
correct)
White disc in
Y
Mathew,
I have been following this thread for a while and we are only hearing
your side of the issue. Since you are using a split-split, i.e, 15 khz.
pair, I assume that yours is the newest system so it is up to you to remidy
the aledged problems. However, if your repeater meets the India
Hi
What about the Narrow Band cystals set in if.
Does this repeater have 15Khz crystals in the rx if section
To much bandwidth passing this will happen.
I'm running 15khz here and no problems from
others.. Using a MSF500 CXB Style.
http://www.com-spec.com/narrow.htm
Yahoo! Groups
6 matches
Mail list logo