I have a set of TCXOs for a RCA 500 series repeater. They are 442.4 TX
and 447.4 RX and were reworked by ICM. Please contact me directly with
an offer.
thank you
James
I have a new in the box RLC-DVR sn#1125 that I want to trade for two
RLC-ADM: Digital Audio Delay Module. Does anybody have some that they want
to part with.
Mike Mullarkey K7PFJ
Sorry for the typo Trunking.
- Original Message -
From: Camilo So
To: Repeater-Builder@yahoogroups.com
Sent: Monday, July 07, 2008 4:43 PM
Subject: Re: [Repeater-Builder] Re: Maxtrac Mic-Hook software option?
Hi Bob
I work in Motorola Plantation Depot for 8 years working
Hi Bob
I work in Motorola Plantation Depot for 8 years working on Maxtrac radio, They
use to call the convention unit MAXTRAC and the trucking unit MAXTRACS with a
"S" The Maxtrac 900 has a common audio problem specially the 900 trucking
converted to conventional, on the volume control there is
I ran my 900 MHz MaxTrac up. No setting in RSS for the hang-up box. I wonder
why they did away with that.
I also discovered that my radio has a serious receive audio problem at the
moment; very weak, very distorted. Almost sounds off-frequency or like a cap
has gone leaky and has upset the bias
Hi Bob,
This case is a Maxtrac 900 Conversion from trunking to conventional
followed by a conversion to the Amateur Band Segment. I've used the
plug jumper but in the case of this radio being used as a repeater
receiver it would have been nicer to simply toggle the hook-switch
in software ver
It may have something to do with the way the radio was initialized, as in
product line, model number, and the various features. Lots of bits, lots of
combinations. I'll have to run my 900 MHz radio up and see what's there.
I suppose this is one more reason why "those who know" just jumper the MI
Mark Thompson wrote:
> Description: The recall involves RadioShack 13.8V DC Power Supplies,
> catalog numbers 22-507 and 22-508 with date codes from
> 08A04 through 01A08.
>
> Date code format is MMAYY where MM is the month and YY is the year. The
> catalog numb
Hi Bob,
Well an interesting thing happens when I try two different
band Maxtrac Radios.
The Off-Hook option appears in the Radio Wide Settings Table as
you suggested, but only for the low UHF and VHF band radios.
When I use the same software to read a Conventional 900 Radio the
Off-Hook o
Gary,
I got this info from a local licensed electrican who does a lot of home
construction. He was not happy either. My wife owning a hair salon also has
seen a number of required changes in your shop.
I do not thing there is a breaker for each outlet, but more than one outlet
wired to mult
I am not buying it. Seems over the top and you would never have
enough breaker panel posistions for all of the needed outlets.
Randy
--- In Repeater-Builder@yahoogroups.com, Ron Wright <[EMAIL PROTECTED]>
wrote:
>
> Bruce,
>
> Probably should kill this topic for it has radiacally changed from
Ron;
That requirement (if it is correct) is NOT part of the NEC
It would be a local thing, and quite frankly, I feel the original poster of
that info may have incorrect information
It would, among other things, limit a home to (42 - circuits used for other
than outlets) receptacles, there being
Bruce,
Probably should kill this topic for it has radiacally changed from orginal
posting and not really repeater related although AC power is a concern for
about any repeater builder.
I think one reason for separate wiring to each outlet is the way so many are
wired using the little spring lo
13 matches
Mail list logo
