Being well aware of Motorola's copyright enforcement vigorousness and
not wishing to trnsgress same, does anyone know of any *aftermarket*
or "public domain" documentaiton or operating notes for the HT600/
P200 and the MT1000 RSS?
Please understand that I am NOT looking for illegitimate copies o
I have a GR300 with M120/M10 radios. Seems nice, puts out about 25 watts,
clean.
I need to get an IDer into this repeater. Suggestions on how and where to
get it?
Thanks
73
Joe Serocki, N9IFG
Prez, WeLCARS (www.welcars.org)
Commander Peter Quincy Taggart: Never give up, neve
Hello,
Was wondering if anyone has had any experience with this particular
model of Repeater ?
I am having trouble with the fan control section which i believe is
actuated by the main repeater controller board that also controls the
Audio path between the RX and TX radios.
I have contacted Panth
Anyone have a manual? I could use it, especially with the pinouts. I have a
schematic, but it only shows half the pinouts! Sheesh J
73
Joe Serocki, N9IFG
Prez, WeLCARS (www.welcars.org)
Commander Peter Quincy Taggart: Never give up, never surrender!
Red Green: Quando omni flunkus mori
Hi group whats the deal with the GE Master II PA decks needing to use a
ferrite isolator with a 50 ohm dummy load and a low pass filter between
the PA and the High Q duplexer. Is this something that most do with
the 75 and 100 w Pa's We just replaced one in a Master II Mobile radio
which laste
--- In Repeater-Builder@yahoogroups.com, "Joe Serocki"
wrote:
" Anyone have a manual? ..."
-
ebay
10 bucks
350158994897
Joe,
The Communications Specialists model ID-8 is probably the most versatile
unit on the market, but not cheap at $70:
There are many simpler and cheaper units available, but not so easy to
program or apply.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroup
Joe,
The Instruction Manual for the HLNB R*I*C*K is 6880901Z79, and is still
available from Motorola Parts for about $6.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Joe Serocki
Sent: Sunday,
The single-page schematic on BatLabs is complete. That's all it is in the
manual. Three 16-pin connectors.
Bob M.
==
--- On Sun, 2/1/09, Joe Serocki wrote:
From: Joe Serocki
Subject: [Repeater-Builder] Manual Request-Motorola RICK
To: Repeater-Builder@yahoogroups.com
Date: Sunday, February
Re: Repeater - Radio - Receiver Pre-Selector Recommendations
I received the following question by direct Email and thought
it might be useful to reply back via the group. There I go
thinking again...
> Do you have any recommendations for a 3 cell pre-selector
> for 150-160 MHz with an inser
Hi Joe,
In addition to the suggestions made by others... I like
the N0AXS ID O Matic, which is now selling on Ebay for about
$21.50 and $2.50 shipping
You have to assemble the ID'er from parts, but it's a
through hole part type kit and easy to complete.
You then have to sort through the ab
--- On Sat, 1/31/09, Joe Serocki wrote:
From: Joe Serocki
Subject: [Repeater-Builder] CD IDer needed for GR300
To: Repeater-Builder@yahoogroups.com
Date: Saturday, January 31, 2009, 3:36 PM
I have a GR300 with M120/M10 radios. Seems nice, puts out about 25 watts, clean.
I need to get
I have a MR4 receiver that the squelch will not close on .
any ideas .
Merrill
KG4IDD
I was not able to upload this to the site due to its size, 13.16 Meg
If someone wants this file, please go to the link below, I got this
information from an E.F. Johnson Rep.
If you can get it to upload here, please do.
http://www.savefile.com/files/1933552
Thanks,
Danny
N5DRG
14 matches
Mail list logo
