It's interesting to hear about your projects! I would be interested in knowing
which VHF manual you're referring to, Jim.
While the original barrels used by Aerial Facilities Ltd. are pretty big I had
the idea to try the beer kegs that are common here in Switzerland. These are 20
litre kegs so
Thanks to everyone for the responses.Specifically our club is investigating
liability insurance.
Thanks for the help.
Dan KC2BEZ
On Mon, Apr 27, 2009 at 8:42 PM, Eric Lemmon wb6...@verizon.net wrote:
Dan,
It's not clear whether you are wanting to insure your equipment against
theft or
FYI
Don KA9QJG
Now you can access The National Swine Flu Situation Page(tm).
Content on the page updates automatically and contains information from
multiple web sites in one location.
CDC, health, maps, RSS news feeds and more.
National Swine Flu Situation Page (tm) link...
Hello Group,
First of all, I would like to thank all those how have given me info and help
with my Quantar rpt. I sure appreciate it.
Had the rpt.(Quantar UHF 125w) programmed yesterday, at a Motorola Shop.
Origional FX was within 1.5 mHZ of New fxs! Hopefully the frontend of rec
will not
To date I have remedied one issue I was having - where my MaxTrac radio
itself would not power up correctly. With assistance from a Jedi Master
we have been able to breathe new life into the old MaxTrac. The Force was
with us! ;-)
I still have the issue involving the weird start-up with the
I have experience with several 451 MHz systems getting hammered by noise
from the strobe. These were Flashguard 3000 units. During the day when the
strobe tubes triggered once it wasn't noticeable. At night when the tubes
were retriggered multiple times to lengthen the on time of the flash, it
The newer L5PNF and L5PNF-RC (preferred) should also work for you, and are
easier to install.
If you can't find a Z-splice, you may want to round up a pair of 7/16 DIN
connectors (ie L5PDF-RC and L5PDM-RC). They are pretty much mechanically just
as strong as a Z-splice, but its much easier to
--- In Repeater-Builder@yahoogroups.com, afa5tp w7...@... wrote:
The rept. DOES NOT have a Wire line board installed. Someone told me
recently that a Controller could be connected to rept. through the wire
line, to give control of Rpt. ID, courtesy beep, linking. etc.
There is a vendor with
Bill,
Can you please elaborate on the shield housing used? I have similar noise on
my VHF ham repeater caused by the same Flashguard 3000 system. I was able to
reduce the noise during night operation by reorientation of the antenna at the
expense of a less than optimum radiation pattern.
Nice way to Celebrate Samuel Morse Birthday on the I-Phone App
I think the People who know a little CW will appreciate it more
Enjoy http://tinyurl.com/c7z9hc
73 De Don KA9QJG
Guys we have a Radius GM300 repeater. It has a good location.And hardly mounted
there. Now it takes some noise.And sometimes self tx by hours.We know we have
to set the squelch by programming.But I wanna know is there any short way to
increase the squelch manually ?
I have a Cushman 5110 and spectrum analyzer wont lock. Any help/advice
appreciated. I really would like to fix this, but not much info
on the web.
Lynn
12 matches
Mail list logo
