My IFR 1600S is giving me a couple problems.
One is it appears to have some high frequency noise in the received audio, but
the generated signal and audio looks and sounds clean. I am thinking maybe some
caps in the power supply might be causing this problem.
I have the three inch thick operato
Those old TM-73x rigs from Kenwood were pretty cool. Still have my TM-732A,
purchased new sometime around 1991. Still works.
Have a tendency to pop PA "brick" modules if the antenna's not connected,
but... well, you only do that once. Ha. :-)
--
Nate Duehr, WY0X
n...@natetech.com
facebook.c
Hi, I am new to this list. It was recommended to me in an effort to locate
some parts for a repeater build.
I am building a spare Moto VHF MSR-2000 for a local club. I have it assembled
and working, but I need the R1 plug-in card.
So, does anyone have any ideas on where I can acquire an R1 ca
Thank you Mike, that is one place I did not think to look.
Milt
Quoting Mike Morris :
> At 08:10 AM 05/20/10, you wrote:
>> Looking for service manual for the TM-733A radio in
>> paper(preferred)or electronic format.
>>
>> B51-8264-00 original or
>> B51-8264-10 revised
>>
>> Document is NLA fr
TM-733 = VHF/UHF amateur mobile
Quoting La Rue Communications :
> We have a TON of service manuals available for sale. One question
> though, is that a typo on the model? I thought all Kenwood product
> lines were TK-XXX.
>
> John Hymes
> La Rue Communications
> 10 S. Aurora Street
> Stockton
Thanks for the clarification! Much appreciated!
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
http://tinyurl.com/2dtngmn
- Original Message -
From: Juan Tellez
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, May 20, 2010 4:09 PM
Subject: RE: [Rep
TK is for LMR, TM for ham mobiles, TH for ham portables and TS for Ham
stations.
JT
De: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] En nombre de La Rue Communications
Enviado el: Jueves, 20 de Mayo de 2010 09:13 a.m.
Para: Repeater-Builder@yahoogroups.com
Asun
Thanks Chuck
73
Steve,M1SWB(UK)
- Original Message -
From: "Chuck Kelsey"
To:
Sent: Thursday, May 20, 2010 11:57 PM
Subject: Re: [Repeater-Builder] Re: Duplexer notch blurred - why?
> Yahoo has been messing up over the last few weeks. I've been getting
> multiple posts too.
>
> Chu
Yahoo has been messing up over the last few weeks. I've been getting
multiple posts too.
Chuck
- Original Message -
From: "Steve"
To:
Sent: Thursday, May 20, 2010 6:48 PM
Subject: Re: [Repeater-Builder] Re: Duplexer notch blurred - why?
> why do I see the same message twice ?.
why do I see the same message twice ?.
- Original Message -
From: "cruizzer77"
To:
Sent: Thursday, May 20, 2010 11:39 PM
Subject: [Repeater-Builder] Re: Duplexer notch blurred - why?
>
>
> I only had a quick try tonight and found that I can get a pretty sharp
> line on the display if
I only had a quick try tonight and found that I can get a pretty sharp line on
the display if I turn the rf gen amplitude up to 10dBm. Then I need to turn
down the ref level to 20dBm to have the curve inside the display at all.
Furthermore there was a warning "change rf gen amplitude, output
-Original Message-
From: n3ltq
Sent: Thursday, May 20, 2010 10:10 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] OT Looking for service manual Kenwood TM-733A
Looking for service manual for the TM-733A radio in paper(preferred)or
electronic format.
B51-8264-00
Yes, I do, but I need one in a different location. There are allot of hiss
around here.
- Original Message -
From: kc7stw
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, May 20, 2010 3:13 AM
Subject: [Repeater-Builder] Re: GMRS repeater wanted or parts to build one
At 08:10 AM 05/20/10, you wrote:
>Looking for service manual for the TM-733A radio in
>paper(preferred)or electronic format.
>
>B51-8264-00 original or
>B51-8264-10 revised
>
>Document is NLA from Kenwood
>
>Thanks
>
>Milt
>N3LTQ
Google is your friend. I typed in the following and
found four sou
La Rue Communications wrote:
>
>
> We have a TON of service manuals available for sale. One question
> though, is that a typo on the model? I thought all Kenwood product lines
> were TK-XXX.
It's a dual band Amateur
Tedd Doda, VE3TJD
Lazer Audio and Electronics
http://www.ve3tjd.com
High Pe
We have a TON of service manuals available for sale. One question though, is
that a typo on the model? I thought all Kenwood product lines were TK-XXX.
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
http://tinyurl.com/2dtngmn
- Original Message -
From: n3ltq
Looking for service manual for the TM-733A radio in paper(preferred)or
electronic format.
B51-8264-00 original or
B51-8264-10 revised
Document is NLA from Kenwood
Thanks
Milt
N3LTQ
I sent you a direct email.
Steve.
--- In Repeater-Builder@yahoogroups.com, "ke7wrc" wrote:
>
> Hi, I am new to this group. I was wondering if anyone had a working used
> repeater for sale that I could use for GMRS or help in finding parts etc. to
> build my own. I would need everything incl
Thanks for all replies. First of all this is the first duplexer I'm building
and I'm not a very experienced user of the spectrum analyzer/tracking generator
so it is possible that I adjusted something wrong as some of you point out.
I'll try if that makes a difference as soon as I can.
Furthe
You do know there is one on the air now right!
Contact off list...
--- In Repeater-Builder@yahoogroups.com, "ke7wrc" wrote:
>
> Hi, I am new to this group. I was wondering if anyone had a working used
> repeater for sale that I could use for GMRS or help in finding parts etc. to
> build my ow
20 matches
Mail list logo
